|
RE: New Fusion and ProYak ARFs
get both
Posted on: 2/22/2009 9:02 PM by Author "763ersma27"
in the forum "OMP - Ohio Model Products Support Forum"
http://www.rcuniverse.com/forum/fb.asp?m=8507036
Help mounting Cessna hangar 9 182 Nose Gear
found it thanks.
Posted on: 9/28/2008 3:25 PM by Author "763ersma27"
in the forum "Giant Scale Aircraft - General"
http://www.rcuniverse.com/forum/fb.asp?m=7998366
RE: Building the Hangar 9 Cessna 182 Skylane
Guys, im building the 1.50 size cessna hangar 9 182 skylane.. I just got my sieara Gear and im trying to mount it. the book says to install 4 bolts with blind nuts. my questionsis how the heck to you get to the back of the mount to install the blind nuts? i cant find wany way to get the nuts behind the block? thanks for the help!
Posted on: 9/28/2008 12:21 PM by Author "763ersma27"
in the forum "Giant Scale Aircraft - General"
http://www.rcuniverse.com/forum/fb.asp?m=7998429
Where to send a G-26 for service/tunning
guys, i would like to send my -g26 in for tunning there is something wrong with it.. We cant get anything from the high needle, and spent 2 weeks trying to make it run good. nothing. Anyone know where i can send?
Posted on: 9/12/2008 10:00 PM by Author "763ersma27"
in the forum "Gas Engines"
http://www.rcuniverse.com/forum/fb.asp?m=7948556
RE: g-26 spudders in flight, perfect on ground!
its the CMPro cessna 140. I also tried chaging the carb from a wt-645 to wt-644, this one does not have the plate hole it has a fuel bulb, with that carb, it it ran a little better, but still spudders in flight.
Posted on: 9/10/2008 2:23 PM by Author "763ersma27"
in the forum "Gas Engines"
http://www.rcuniverse.com/forum/fb.asp?m=7940365
g-26 spudders in flight, perfect on ground!
guys, i have a G-26, that i was able to tune on the ground, sounds wonderfull, from idle to full, mid range perfect.. right after take off it will spudder and, it wont die, but runs crappy. do you think this is a lean or rich problem, should i adjust the H or L side.. Checked for air leaks, nothing.. Replaces the carb spacer. nothing it perrs beautifull on the ground in any speed.
Posted on: 9/10/2008 1:23 PM by Author "763ersma27"
in the forum "Gas Engines"
http://www.rcuniverse.com/forum/fb.asp?m=7940234
RE: Slow Poke wing question
whats wrong with elevons?
Posted on: 8/19/2008 10:49 AM by Author "763ersma27"
in the forum "Questions and Answers"
http://www.rcuniverse.com/forum/fb.asp?m=7862481
RE: Slow Poke wing question
ive decedited to use ELIVONS
Posted on: 8/19/2008 8:38 AM by Author "763ersma27"
in the forum "Questions and Answers"
http://www.rcuniverse.com/forum/fb.asp?m=7862131
Slow Poke wing question
Guys i just bought a used slow poke 40, looks like it was a kit build. I would like to get ailerons on it. i see tower sells a wing for there slow poke ARF that has alierons. http://www3.towerhobbies.com/cgi-bin/wti0001p?&I=LXAZK8&P=7 Does anyone know if it will fit the kit?
Posted on: 8/18/2008 2:20 PM by Author "763ersma27"
in the forum "Questions and Answers"
http://www.rcuniverse.com/forum/fb.asp?m=7859303
how long is safe on a wall-cube?
I have a airplane with a 6.0V 2500 receiver and a 4.8V 2000mph batteries, all are Nickel medel I putt them on wall-qubes during the week when not flying, how long is safe to leave them on a charge?
Posted on: 8/4/2008 9:39 PM by Author "763ersma27"
in the forum "Questions and Answers"
http://www.rcuniverse.com/forum/fb.asp?m=7808339
RE: how long is safe on a wall-qube?
Sorry about that, they are all Nickel medal hy.
Posted on: 8/4/2008 9:37 PM by Author "763ersma27"
in the forum "Questions and Answers"
http://www.rcuniverse.com/forum/fb.asp?m=7809165
help tunning a zenoah g-26
Guys i have a used zenoah g-26, it seems to fly fline at full power, and seems to idle ok but after i fly for about 15 min, and try to bring it in, it will die when i pull the power back.. also some times it will idle on approach, but when i try to go back around it really hesitates to excellerate, like it lags then goes.. any tunning ideas?
Posted on: 7/22/2008 9:36 PM by Author "763ersma27"
in the forum "Gas Engines"
http://www.rcuniverse.com/forum/fb.asp?m=7761326
2 to 3 blade prop help
Guys im flying a 140 size CM Pro cessna, it has a G26 GAS, with a 16x8 prop, i would like to go 3-blade. what size do i need to keep about the same as the 16x8
Posted on: 7/16/2008 9:44 PM by Author "763ersma27"
in the forum "Questions and Answers"
http://www.rcuniverse.com/forum/fb.asp?m=7739017
question about magenito hook up
when the black wire is connect to the engine case is that engine running or engine off? what i mean is when the black wire is disconnected, does that kill the engine, or let ir run
Posted on: 7/8/2008 9:08 PM by Author "763ersma27"
in the forum "Gas Engines"
http://www.rcuniverse.com/forum/fb.asp?m=7709205
RE: first gas engne, g-26 help
bought engine used... looks like the choke is missing, is this a problem, can i still run it?
Posted on: 7/8/2008 7:20 PM by Author "763ersma27"
in the forum "Questions and Answers"
http://www.rcuniverse.com/forum/fb.asp?m=7708782
first gas engne, g-26 help
guys, just got my first gasonline enigne, a G-26 can someone give me a diagram for the fuel setup, lines from the tank, what line goes to the muffler tip, and where to place the fill.. i aslo cant find the choke, all i see is the throlle arm, i dont see the arm for a choke. its a magenito g-26 thanks so much.
Posted on: 7/8/2008 6:24 PM by Author "763ersma27"
in the forum "Questions and Answers"
http://www.rcuniverse.com/forum/fb.asp?m=7708598
gas engine G-26 help
guys, just got my first gasonline enigne, a G-26 can someone give me a diagram for the fuel setup, lines from the tank, what line goes to the muffler tip, and where to place the fill.. thanks so much.
Posted on: 7/8/2008 5:34 PM by Author "763ersma27"
in the forum "Gas Engines"
http://www.rcuniverse.com/forum/fb.asp?m=7708427
Zenoah Engine question
Does anyone know if the G-26 magneito engine and the new g-26 electric ignition version are about the same size... im looking for the mouning block size and the length of the carb, from what i see in the pics, the electric ignition version has a longer sticking out carb, what do you think? http://www.rchobbies.org/zenoah.htm
Posted on: 6/23/2008 8:58 PM by Author "763ersma27"
in the forum "RC Warbirds and Warplanes"
http://www.rcuniverse.com/forum/fb.asp?m=7653169
RE: P-51 Take off Tips
Here are some pics of the gear, it is the KMP older P-51 they dont make this arf any more, i found it in toleldo and got a super deal
Posted on: 6/4/2008 5:24 PM by Author "763ersma27"
in the forum "RC Warbirds and Warplanes"
http://www.rcuniverse.com/forum/fb.asp?m=7580363
RE: P-51 Take off Tips
thanks for all the help, im going to shim the gear tonight and take her out this weekend and see what happens.
Posted on: 6/4/2008 9:02 AM by Author "763ersma27"
in the forum "RC Warbirds and Warplanes"
http://www.rcuniverse.com/forum/fb.asp?m=7578565
RE: P-51 Take off Tips
ill have to think about putting a shim in the back of the gear to make sure the retracts still fit into the cups.
Posted on: 6/3/2008 8:33 PM by Author "763ersma27"
in the forum "RC Warbirds and Warplanes"
http://www.rcuniverse.com/forum/fb.asp?m=7576707
RE: P-51 Take off Tips
ITS THE KMP p-51 with a saito 120S, about 70 inch wings, 13lbs.. im flying of a paved runway. few bumps here and their.
Posted on: 6/3/2008 8:32 PM by Author "763ersma27"
in the forum "RC Warbirds and Warplanes"
http://www.rcuniverse.com/forum/fb.asp?m=7576700
RE: P-51 Take off Tips
also once you finnaly get it in the air, after a prop or 2, if flys great!
Posted on: 6/3/2008 7:48 PM by Author "763ersma27"
in the forum "RC Warbirds and Warplanes"
http://www.rcuniverse.com/forum/fb.asp?m=7576495
P-51 Take off Tips
Anyone have good tips for a P-51 take off. Mine wants to nose over very easley. The CG is exatly where the manuel wants it to be.. I have to hold a lot of up during the roll out. im scared its going to lift off too soon and snap over. Any good technices.
Posted on: 6/3/2008 7:47 PM by Author "763ersma27"
in the forum "RC Warbirds and Warplanes"
http://www.rcuniverse.com/forum/fb.asp?m=7576492
RE: Robart Retracts keep getting stuck up
under 1 of the 4 mounting screws?
Posted on: 6/2/2008 10:00 AM by Author "763ersma27"
in the forum "RC Warbirds and Warplanes"
http://www.rcuniverse.com/forum/fb.asp?m=7570218
RE: Robart Retracts keep getting stuck up
sounds right becasue when i bump mine, it makes a noise from the lock,
Posted on: 6/2/2008 8:36 AM by Author "763ersma27"
in the forum "RC Warbirds and Warplanes"
http://www.rcuniverse.com/forum/fb.asp?m=7569978
RE: Robart Retracts keep getting stuck up
what is the best way to lube the O-Ring?
Posted on: 6/1/2008 10:02 PM by Author "763ersma27"
in the forum "RC Warbirds and Warplanes"
http://www.rcuniverse.com/forum/fb.asp?m=7568587
RE: Robart Retracts keep getting stuck up
i have not tried to lube the joints, i will try that tommrow, i pump it up to about 80 to 100 psi
Posted on: 6/1/2008 9:24 PM by Author "763ersma27"
in the forum "RC Warbirds and Warplanes"
http://www.rcuniverse.com/forum/fb.asp?m=7568405
Robart Retracts keep getting stuck up
I have a new set of Robart Air up spring down main gear on my P-51.. Ive been cycleing them on a stand and they keep getting stuck up. I have to give them a nudge then they will do down fine.. They go up perfect, then flip the swtich to put them down, and nothing, once i nudge the tire they come down fine. i do not see any binding any where. Any ideas?
Posted on: 6/1/2008 9:10 PM by Author "763ersma27"
in the forum "RC Warbirds and Warplanes"
http://www.rcuniverse.com/forum/fb.asp?m=7568334
RE: Help with Tail Wheel setup for KMP P-51 ARF
KMP, Kondor model products.
Posted on: 5/27/2008 7:42 AM by Author "763ersma27"
in the forum "RC Warbirds and Warplanes"
http://www.rcuniverse.com/forum/fb.asp?m=7545769
| 
