RE: Mirage III 1/5 scale
Hola Carlos, very nice scheme, I like it a lot. Saludos Jesus
Posted on: 5/20/2013 3:23 PM by Author "AVIOJET" in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=11517518

RE: BVM T-33 Build
[quote]ORIGINAL: argyris [quote]ORIGINAL: AVIOJET [quote]ORIGINAL: Kelly Rohrbach You may want to double check the main wing spar center section. The wing flutter could have started there. Remember, that vintage of kit was designed well before the first turbine jet flew. The main wing spar if I remember has an open hoop design that went around the ducted fan but was left open on the upper half
Posted on: 5/19/2013 4:12 PM by Author "AVIOJET" in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=11516405

RE: BVM T-33 Build
[quote]ORIGINAL: Kelly Rohrbach You may want to double check the main wing spar center section. The wing flutter could have started there. Remember, that vintage of kit was designed well before the first turbine jet flew. The main wing spar if I remember has an open hoop design that went around the ducted fan but was left open on the upper half. Like on the F-16 BVM put a hoop section on the top of the spar to complete the hoop so to speak. Picture a horse shoe upside down, there would be a carbon former made to connect the two open ends of the shoe. This will greatly reduce the amount of wing flex. [/quote] You are refering to this one? I built this T-33 for a customer more than 10 years ago. He flew it with a P-60 and no issues with flutter. BR Jesus A. Serrano
Posted on: 5/17/2013 4:27 PM by Author "AVIOJET" in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=11514648

RE: Can JP-8 be used in micro turbine?
Useful information http://es.wikipedia.org/wiki/JP-8 You can use any translator BR Jesus
Posted on: 6/25/2012 3:01 PM by Author "AVIOJET" in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=11131576

RE: Cougar drivers,help
On the Dan Palmers plans is located at 135 mm. from the leading edge wing measured at the root
Posted on: 6/5/2012 3:48 PM by Author "AVIOJET" in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=11107774

RE: CASA C101: Made in Spain
Hi Flying Cat, welcom again to the forums. I hope that some day your father left you to fly the 101[;)] Astonising job. Have you received the 101 pics? Un saludo Jesus
Posted on: 2/20/2012 4:18 PM by Author "AVIOJET" in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=10968146

RE: Futura ready
Hi all, All this issues woul be resolved with the intallation of a fully by-pass system "a lo BVM style". You could save a lot of drag on the innner of the fuselage. Just my 2 cents[;)] BR Jesus
Posted on: 2/20/2012 4:12 PM by Author "AVIOJET" in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=10968136

RE: Bandit ARF vs Super Bandit
[quote]ORIGINAL: FalconWings P-80SE BARF. Love it. [/quote] Hola David[;)] I am not agree. Merlin 100 or JC Rabbit and BARF. Save weight and get more power[:D][:D][:D] BR Jesus
Posted on: 2/20/2012 4:06 PM by Author "AVIOJET" in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=10968129

RE: A6E Intruder Test Flight
[quote]ORIGINAL: icepilot Mike, that's a beautiful plane, and it looks absolutely fantastic in the air!!! I had to watch the entire video in silence, though - that extremely irritating music ruins the experience - would you please post another one without any music at all? [:D] Tor (video producer!![8D]) [/quote] And with the landing sequence, please[;)] BR Jesus
Posted on: 2/19/2012 4:17 PM by Author "AVIOJET" in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=10966484

RE: NEW BUILDERS JET KIT VAMPIRE
Same for one set of Hunter plans BR Jesus
Posted on: 2/15/2012 3:33 PM by Author "AVIOJET" in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=10960676

RE: NEW BUILDERS JET KIT VAMPIRE
[quote]ORIGINAL: jetster81 I emailed Tony last evening and just had a reply, He says that due to the unexpected success of the Vampire he is planning more turbine powered kits in the future and is also working with Wren turbines on a venture. The up coming designs which could take a while are two trainer types ,a Vulcan without bificurated pipe for a single turbine ,and yes a Hunter! the best of British designs during the fifties in my view.  [/quote] At last!!! Let me know how soon the Hunter plans will be ready[;)] BR Jesus
Posted on: 2/15/2012 6:32 AM by Author "AVIOJET" in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=10959901

RE: NEW BUILDERS JET KIT VAMPIRE
I am agree with Sonnich, a Hawker Hunter plans and short wood kit would be great[;)] BR Jesus
Posted on: 2/14/2012 6:05 AM by Author "AVIOJET" in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=10958297

RE: NEW BUILDERS JET KIT VAMPIRE
I am very interested in a traditional balsa build Hawker Hunter at 1:6 scale for a P-120. Anyone knows if Tony may be interested in it? I would purchase the canopy and plans[;)] BR Jesus
Posted on: 2/6/2012 4:04 PM by Author "AVIOJET" in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=10947051

RE: 4th gen A-10 by Mibo jets
Hi flesche, you can show the interior of the electrical brakes? I make my own retracts and is easy to fit a electric gear box, but electrical brakes.......I need some ideas[;)] Thanks in advance BR Jesus
Posted on: 1/31/2012 3:36 PM by Author "AVIOJET" in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=10937394

RE: Need Some Help On a Bandit.
Thanks a lot, Eric. It is just i have supossed. So I will fit a carbon fiber tube of 22 mm. o.d. and 19 mm. i.d. I guess it will be enough[:D] BR Jesus
Posted on: 11/25/2011 3:47 PM by Author "AVIOJET" in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=10828823

RE: Need Some Help On a Bandit.
Hi Eric, still waiting for the diameter of the aluminium wing spar[;)] BR Jesus
Posted on: 11/24/2011 11:23 AM by Author "AVIOJET" in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=10827282

RE: Winter projects?
This is my winter project http://www.rcmodelistas.es/foro/aviones-reaccion-f14/balsa-bandit-jas-models-t2582.html BR Jesus
Posted on: 11/18/2011 12:45 PM by Author "AVIOJET" in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=10818393

RE: Need Some Help On a Bandit.
Hi Eric Could you measure the diameter of the aluminium wing spar? I am building from scrath a Balsa Bandit and I am thinking to change the wing fixing system "a lo MkII"[;)] Thanks in advance BR Jesus
Posted on: 11/18/2011 12:26 PM by Author "AVIOJET" in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=10818365

RE: MKS thin servo DS6125
[quote]ORIGINAL: marc s Its the same servo as this thread is discussing [:o] marcs [/quote] Yes, I know. Sorry, my question has not been established on the right way. BTW, how about for the Balsa Bandit stabs?[;)] BR Jesus
Posted on: 10/21/2011 4:39 PM by Author "AVIOJET" in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=10776655

RE: MKS thin servo DS6125
How about this servo for the stabs of my scratch build Balsa Bandit? It fits inner the stab withuot protrude out. A couple of videos http://www.youtube.com/watch?v=LgVf5Y13PMo http://www.youtube.com/watch?v=Lpny8n6DH4Y BR Jesus
Posted on: 10/21/2011 11:58 AM by Author "AVIOJET" in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=10776266

RE: Looking for an F9F-2 Panther expert
[quote]ORIGINAL: highhorse Very good point about the length, Chris. I have read conflicting figures regarding how much was added to the fwd fuse, but according to [link=http://www.vectorsite.net/avf9f.html]this[/link] the stretch was 19.5'' . Generally when a fuse is stretched, that's split half and half to keep the cg right, ie half forward of the wing and half aft. I have no idea if that's the case here. I called the Cavenaugh museum today to ask about the hinge line issue (they have a -2), but the Mx staff was gone for the day. I will try again tmrrw........... Does anyone have a drawing/photo of the inboard flaps and where the aft speed brake hinge line is? It would be a bit of a pita but also cool to add that feature to my Fb model (a 4/5). [/quote] Very interesting thread I am working in the drawings of a F9F-5. I atach some pics of a 4 and two 5 about the inboard flaps. Now only need to know some clear about elevator hinges[;)] BR Jesus
Posted on: 4/5/2011 4:04 PM by Author "AVIOJET" in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=10445259

RE: Rod to inject smoke into turbine?
Hi Mike, read post # 20 http://www.rcuniverse.com/forum/m_7008897/tm.htm BR Jesus
Posted on: 3/23/2011 1:19 PM by Author "AVIOJET" in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=10418133

RE: How could I do smoke system for Boomerang XL?
Hi Mr. Stuka[;)] First you must remove the fuel tank and fit one more small. Remenber you land with half tank of kero.[:)] Then you put the smoke tank over the fuel tank under the top cover so you will have not C.G. variations. If you need any help give me a call.[:D] BR Jesus
Posted on: 3/11/2011 3:56 PM by Author "AVIOJET" in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=10394021

RE: Jet Cat P-100 Flown ( feedback and photos)
Tam, sorry for the incident with your beautiful A-4 BR Jesus
Posted on: 3/8/2011 3:21 PM by Author "AVIOJET" in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=10387413

RE: F-16 Thunderbirds code colors
I guess Carlos is asking for the FS codes [:D] BR Jesus
Posted on: 2/16/2011 4:07 PM by Author "AVIOJET" in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=10341245

RE: Electric Retracts from Down and Locked
Hi Mitch, I have readed this thread and the information on your site. If I decide to convert my gears to electric, what happend with my neumatic brakes and all the ancillary involved? in other words are you thinking to release some electric brakes? I fly jets and we need brakes[8|] BR Jesus
Posted on: 12/19/2010 12:02 PM by Author "AVIOJET" in the forum "RC Warbirds and Warplanes"
http://www.rcuniverse.com/forum/fb.asp?m=10206402

RE: Turbine size or lbs of thrust needed?
Merlin 140 or JC Cheetah, perfect match.[;)] BR Jesus
Posted on: 12/6/2010 12:06 PM by Author "AVIOJET" in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=10180488

RE: Engine angle on Kingcats, why ???
[quote]ORIGINAL: butler-campers Mine flies perfect with a p200 and the original angel. just look on the video<img alt='''' src=''http://www.rcuniverse.com/forum/js/fckeditor/editor/images/smiley/msn/biggrin.gif'' />  (on 3 min or 3.55 min it is extreme) and also the angel of take off is perfect<img alt='''' src=''http://www.rcuniverse.com/forum/js/fckeditor/editor/images/smiley/msn/biggrin.gif'' /> <a class=''postlink'' href=''http://www.youtube.com/watch?v=2QZqlkjFg4A''>http://www.youtube.com/watch?v=2QZqlkjFg4A After watch the video I guess you are from "The Throttle Benders Union" [:D] My BobCat with P-120 needs 2 washers on the front bolt to get high speed low pass horizontal fligth. My Boomerang Sprint with Wren 70 is at 0°-0°-0° and perform high speed low pass horizontal flight. I guess that the location of the stab, near or far of the turbine flux is the question. BR Jesus [/quote]
Posted on: 11/15/2010 7:38 PM by Author "AVIOJET" in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=10137559

RE: Your
My other toy http://www.vimeo.com/11689496
Posted on: 11/8/2010 6:45 PM by Author "AVIOJET" in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=10123340

RE: Nice combo
[quote]ORIGINAL: Rakaz In fact it was my unic dream. Raúl [/quote] [size=4]My TOO[/size] [:D][:D] Good luck for the next weekend, I will hope some pics.[:)] Salu2 Jesus
Posted on: 5/31/2010 6:57 PM by Author "AVIOJET" in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=9771750