RE: JR stick condition switching
quote: ORIGINAL: Andrew_S is there a way to program all the dual rate switches as one ? if so how>? If you go into System menu and Device Select, you can turn on Flight Modes and select either the Flap Switch or the Aux3 switch. When you then go into D/R Expo, you will be able to set the D/R for Ail, Elev, and Rudder, for each Flight Mode, and they will all operate off the same switch
Posted on: 5/18/2012 8:33 AM by Author "Andrew_S" in the forum "JR Radio & Spektrum Radios"
http://www.rcuniverse.com/forum/fb.asp?m=11085743

jr9503
is there a way to program all the dual rate switches as one ? if so how>?
Posted on: 5/7/2012 4:05 AM by Author "Andrew_S" in the forum "JR Radio & Spektrum Radios"
http://www.rcuniverse.com/forum/fb.asp?m=11071200

RE: help
right, but the recver is y harness into one the ailerons.that is the way in installed from the factory from horixon..
Posted on: 4/19/2012 8:09 AM by Author "Andrew_S" in the forum "RC Radios, Transmitters, Receivers, Servos, gyros"
http://www.rcuniverse.com/forum/fb.asp?m=11048474

help
on the receiver? 9501 trans, tryin o use the glider mode. using the ar600 2.4? looks like the esc is on the same as into an one of the y hsrness...its a radion pro glider....
Posted on: 4/18/2012 9:39 PM by Author "Andrew_S" in the forum "RC Radios, Transmitters, Receivers, Servos, gyros"
http://www.rcuniverse.com/forum/fb.asp?m=11048070

RE: JR X9503 suddenly stops transmission HELP !
did u check the fuse?
Posted on: 4/17/2012 11:03 AM by Author "Andrew_S" in the forum "JR Radio & Spektrum Radios"
http://www.rcuniverse.com/forum/fb.asp?m=11045853

jr
can the 921 can used without the sattlitlites?
Posted on: 2/22/2012 2:45 PM by Author "Andrew_S" in the forum "RC Radios, Transmitters, Receivers, Servos, gyros"
http://www.rcuniverse.com/forum/fb.asp?m=10971126

RE: ignition
thanks/
Posted on: 2/3/2012 12:34 PM by Author "Andrew_S" in the forum "Gas Engines"
http://www.rcuniverse.com/forum/fb.asp?m=10942210

ignition
Does anyone know if a dle ignition is compatable with a rcgf 26 engine//??
Posted on: 2/3/2012 9:09 AM by Author "Andrew_S" in the forum "Gas Engines"
http://www.rcuniverse.com/forum/fb.asp?m=10941927

RE: Photos Of Trailer Interior Layout, Please Post Yours Too!!
I think lowes had the tracks. I saw something similiar there..
Posted on: 1/3/2012 2:42 PM by Author "Andrew_S" in the forum "Tips & Techniques"
http://www.rcuniverse.com/forum/fb.asp?m=10889949

RE: ESM JU-87 Stuka-Winter Camo Kit
mine flies like a trainer..and power is a 26 cc gasser......
Posted on: 10/8/2011 6:55 PM by Author "Andrew_S" in the forum "RC Warbirds and Warplanes"
http://www.rcuniverse.com/forum/fb.asp?m=10755396

RE: Photos Of Trailer Interior Layout, Please Post Yours Too!!
I have a budddy that sold me a 6*12 single axle trailer for 500 bucks.went to lowes and bought some carpet to line the floor. Painted all the walls white. I used an old bed frame rail on both sides of the walls, and attatched a piece of ply to the rails. in the floor i have several hooks to bungee the fuses down. on the shelf, I have stove pipe flanges screwed into the shelf , with 3/4 male pcv with pipe going straight up to cradle all the diffenent wing.s the pipe is covered with with the foam tubes from a hard ware store...For power I use a male-female plug. one being in the trailer and the other is wired into my suburban so it can charge on the way to the field...
Posted on: 5/29/2011 12:05 AM by Author "Andrew_S" in the forum "Tips & Techniques"
http://www.rcuniverse.com/forum/fb.asp?m=10546013

RE: 25mm Wing Tube? Where can I get one?
i got one off of a funstana 125 and i believe it is 25mm....check it out on horizons site...
Posted on: 5/28/2011 11:22 PM by Author "Andrew_S" in the forum "ARF or RTF"
http://www.rcuniverse.com/forum/fb.asp?m=10545989

RE: KMP Stuka-build details
some where in the 20-20 pitvh range...which engine? lets see some pics....
Posted on: 5/17/2011 10:03 PM by Author "Andrew_S" in the forum "RC Warbirds and Warplanes"
http://www.rcuniverse.com/forum/fb.asp?m=10526757

RE: ARF or A-ARF
amen to that.......
Posted on: 3/19/2011 11:52 AM by Author "Andrew_S" in the forum "ARF or RTF"
http://www.rcuniverse.com/forum/fb.asp?m=10409909

RE: ARF or A-ARF
I had a h9 1/3 sukhoi...it fell apart in the air..They sent me a new plane to replace it...2 months later the rudder fell off right after take off..I fixed it and got rid of it...I have a h9 fokker d7 and the covering peeled off the bottom wings... 2 months old...they didnt want to fix it because I couldnt find the receipt..I called back and talked to scott and he sent me some covering for the wings.....but i am finished with h9 stuff....about 12 years ago i had a 1/3 cap..never a minutes trouble. I hate i sold that plane to get that suckhoi...
Posted on: 3/19/2011 4:32 AM by Author "Andrew_S" in the forum "ARF or RTF"
http://www.rcuniverse.com/forum/fb.asp?m=10409319

RE: Dummy needs batt tester help
Sounds like the tester is defective.take that one back....I just tried mine by testing the lipos and it reads normal..I have a craftsman handheld one, it looks like a fluke tester...
Posted on: 3/13/2011 5:24 PM by Author "Andrew_S" in the forum "Batteries & Chargers"
http://www.rcuniverse.com/forum/fb.asp?m=10397879

RE: whats up with dx8 warning
phew ! ! ! [:D]
Posted on: 2/20/2011 2:38 PM by Author "Andrew_S" in the forum "JR Radio & Spektrum Radios"
http://www.rcuniverse.com/forum/fb.asp?m=10350723

whats up with dx8 warning
I clicked on an add for dx8 spectrum from horizon and noticed warning disclaimer. It said horizon has confirmed that the radios are made by a counterfeit company and they are calling them dangerous and will not warranty??
Posted on: 2/19/2011 11:35 PM by Author "Andrew_S" in the forum "JR Radio & Spektrum Radios"
http://www.rcuniverse.com/forum/fb.asp?m=10349447

RE: parkzone battery upgrade
everything u said helps out tremendously...I know nothing about these electrics. Been flying gas and glow for 35 years. I was just walkin around the hobby store and picked the mustang up..I'm lookin at gettin a vista power charger from radicalrc that will charge the lipos along with the nimah-nicad. It does 4 packs at once. But there are so many charger out there it's hard
Posted on: 2/19/2011 11:06 PM by Author "Andrew_S" in the forum "E-Flight Power Sources"
http://www.rcuniverse.com/forum/fb.asp?m=10349416

RE: parkzone battery upgrade
IThanks for the reply. U didnt confuse the issue at all...I was just lookin at my triton and it doesnt have a plug in other than the banana plug and a thermo sensor with 3 wires..Looks like I need to upgrade..
Posted on: 2/16/2011 6:30 PM by Author "Andrew_S" in the forum "E-Flight Power Sources"
http://www.rcuniverse.com/forum/fb.asp?m=10341633

RE: Begineer to RC Planes
hahahahaaha [:D]
Posted on: 2/13/2011 7:46 AM by Author "Andrew_S" in the forum "RC Warbirds and Warplanes"
http://www.rcuniverse.com/forum/fb.asp?m=10332685

RE: Begineer to RC Planes
Welcome...Definitely seek out a club before you do anything...they will be more than happy to help u with your plane....
Posted on: 2/13/2011 3:47 AM by Author "Andrew_S" in the forum "RC Warbirds and Warplanes"
http://www.rcuniverse.com/forum/fb.asp?m=10332267

parkzone battery upgrade
Hey guys, I bought a p51 parkzone rtf..It has a 11.1 1300 lipo pack along with it's own charger..I want to charge it with my triton..The included charger has 4 wires..I can I go about making up a charge lead for this? Also to get some more flight time, what size battery should I go up to? Should I go up on the voltage and capacity? I really appreciate the help in advance....
Posted on: 2/13/2011 3:43 AM by Author "Andrew_S" in the forum "E-Flight Power Sources"
http://www.rcuniverse.com/forum/fb.asp?m=10332262

RE: bought a giant scale mx-s
that I get from radical rc along with a 4.8 volt pack for the ignition...But what ever servo's u decide
Posted on: 2/11/2011 4:43 AM by Author "Andrew_S" in the forum "Giant Scale Aircraft - 3D & Aerobatic"
http://www.rcuniverse.com/forum/fb.asp?m=10327974

RE: Great Planes Reactor 120-160?
cool thanks..
Posted on: 2/9/2011 8:43 AM by Author "Andrew_S" in the forum "3D Flying!"
http://www.rcuniverse.com/forum/fb.asp?m=10323256

RE: Great Planes Reactor 120-160?
lookin at the site, that is for a carbon tube right??
Posted on: 2/9/2011 7:56 AM by Author "Andrew_S" in the forum "3D Flying!"
http://www.rcuniverse.com/forum/fb.asp?m=10323139

RE: Great Planes Reactor 120-160?
thanks, bout to do it now.....[:D]
Posted on: 2/9/2011 7:45 AM by Author "Andrew_S" in the forum "3D Flying!"
http://www.rcuniverse.com/forum/fb.asp?m=10323115

reactor wing tube
Hey guys, Im trying to locate a carbon wing tube for the 55 cc reactor..looks like its 5/8 -24 inches long. Anyone know where I can get one? tbm sells one but it's only 20 inches long.. thanks for the help
Posted on: 2/9/2011 7:19 AM by Author "Andrew_S" in the forum "ARF or RTF"
http://www.rcuniverse.com/forum/fb.asp?m=10323056

RE: Great Planes Reactor 120-160?
Hey guys, anyone know where I can get a carbon wing tube for the reactor? I cant seem to fine one. Looks like it's 5/8 -24 inches......
Posted on: 2/9/2011 7:16 AM by Author "Andrew_S" in the forum "3D Flying!"
http://www.rcuniverse.com/forum/fb.asp?m=10323048

RE: how to get over the pucker factor? Got it!!
U just gotta do it...set your mind to think that and only that..it works for me...
Posted on: 2/7/2011 9:44 PM by Author "Andrew_S" in the forum "Giant Scale Aircraft - 3D & Aerobatic"
http://www.rcuniverse.com/forum/fb.asp?m=10320167