|
RE: Weatronic 2.4 RF diagnostic tool
Hello, Some news for Android APP for Telemetry ? Stéphane
Posted on: 9/18/2012 12:56 AM by Author "Aquilon"
in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=11232033
RE: CARF CT-114 Tutor 2.6m Build thread
Thanks Dave for your reply. Il will add it on mine. Best regards. Stéphane
Posted on: 10/17/2011 1:41 AM by Author "Aquilon"
in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=10769033
RE: CARF CT-114 Tutor 2.6m Build thread
No other feedback about mandatory to make carbon reinforcement on rudder area ? I don't use speed-brakes on my Tutor... Best regards. Stéphane
Posted on: 10/17/2011 12:03 AM by Author "Aquilon"
in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=10768989
RE: CARF CT-114 Tutor 2.6m Build thread
Dear All, I'm very close to end the assembly phase of my CARF TUTOR. As mentioned on the CARF documentation, it is suggested to add some carbon reinforcement on the fuselage, around the rudder area : [i]Note On the prototype aeroplanes there is a small amount of fuselage flex caused by the high tail and leverage, this has not been an issue in the extensive flying program, but some addition carbon tows can be added around the former position-take these down around the fuselage sides to the four o’clock and eight o’clock positions[/i] This modification is it mandatory? What's the feedback of TUTOR owners ? I'm close to install the tail pipe, and I want to know if it's necessary to do the reinforcement before. Thank for your reply. Best regards. Stéphane
Posted on: 9/30/2011 2:06 AM by Author "Aquilon"
in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=10741592
RE: Weatronic update v2.30
Hello Olivier, Same procedure here yesterday afternoon with my TX, Micro 12 and 12/22R. No problem at all, but I didn't have time to fly with it. I just notice some minor bugs with GigaControl V2.30 in French language (mail already sent to Alwin). Stéphane
Posted on: 7/5/2010 3:45 AM by Author "Aquilon"
in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=9845288
RE: pst panther colors!
I remember this photo... [;)] But I'm not sure that PST colours match perfectly FS colours ! Stéphane
Posted on: 7/1/2010 7:47 AM by Author "Aquilon"
in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=9837857
RE: Weatronic headquarters visit
Hello Olivier, [i][b]Hardware suggestion[/b][/i] A micro RX12 variant with 2 interchangeable wire aerials with SMA connections must be helpful into small carbone fuselage, to allow to use aerial's extensions or external's aerial (as with 12/22R). Schulze have a similar variant with their Wave 3D 2,4 RX12. Stéphane
Posted on: 6/17/2010 9:28 AM by Author "Aquilon"
in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=9808549
RE: Weatronic headquarters visit
Of course, but it will be easier with SMA connector. Stéphane
Posted on: 6/17/2010 8:52 AM by Author "Aquilon"
in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=9808750
ViperJet logo in DXF ?
Hello all, Does somebody have the ViperJet logo (as seen on the rudder...) in DXF file ? I'm looking for it to my plotter... Best regards. Stéphane
Posted on: 4/25/2010 11:29 PM by Author "Aquilon"
in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=9689003
RE: I`m the first ...
[quote]ORIGINAL: Eagle Driver [quote]Didi Kramer, who was part of evoJet .... [/quote] Diddi was never a part of evojet, Orbit was only a reseller for Hammer Engines with a own OEM-Brand, Evojet ..... NOW Evo is starting to produce their own turbines ..... [/quote] Don't forget that Orbit wasn't only a reseller; it was the designer and manufacturer of the previous ECU. Now, IQ-Hammer uses a Projet one. Stéphane
Posted on: 4/21/2010 1:22 PM by Author "Aquilon"
in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=9678157
RE: Graupner Inspiration build thread-Flown
Hello Thomas, Yes, the pipe is included in the kit. Stéphane
Posted on: 1/19/2010 4:29 PM by Author "Aquilon"
in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=9429870
RE: Graupner Inspiration build thread-Flown
[quote]ORIGINAL: Dave Wilshere Stéphane Yes I did not have any Eurokit units in stock so used Behotec C36 with the AT Harpoon trailing link legs...nice and light. Regards Dave T. Yep V quick, well thought out kit...well impressed so far. [/quote] Dave, Trevor, Can you give me the maximum admissible width for the gear mount ? I want to know if a Behotec C40 can fit. Best regards. Stéphane
Posted on: 11/9/2009 7:26 AM by Author "Aquilon"
in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=9239857
RE: Graupner Inspiration build thread-Flown
[quote]ORIGINAL: Dave Wilshere Martin, Yes the canopy is tinted with ''smoke'' tint, the photos show it black but its more subtle-thought I did it for Trevor in a rush before we met at the field. [/quote] Dave, Which product do you use to smoke the canopy ? I'm waiting for my Inspiration and, like you, I prefer it with smoked canopy instead of clear one. Stéphane
Posted on: 11/8/2009 12:04 PM by Author "Aquilon"
in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=9237843
RE: Graupner Inspiration build thread-Flown
Hello Dave, What is the retract used ? It looks like Behotec gear... Best regards. Stéphane
Posted on: 11/5/2009 1:06 AM by Author "Aquilon"
in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=9229373
RE: Weatronic 2.4 RF diagnostic tool
Sorry Olivier, but JeanFi said me that he never fly THIS plane at Cazaux... either with Wea 2.4 or Grp SPCM20. Previous 2.4 Wea tests made at Cazaux were done with an electro-glider. So, we can't exclude a problem due to the plane configuration. Stéphane
Posted on: 10/21/2009 2:48 AM by Author "Aquilon"
in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=9190103
RE: Graupner`s sport jet
Dave, Some news about your Inspiration batch ? When will it be delivered from Graupner ? I'm looking for more photos/details of the kit. Best regards. Stéphane
Posted on: 10/16/2009 2:14 AM by Author "Aquilon"
in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=9177277
RE: Weatronic 2.4 RF diagnostic tool
JP, You are the Hawk's Man ! [;)] See you... Stéphane
Posted on: 10/5/2009 4:06 PM by Author "Aquilon"
in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=9148831
RE: Weatronic 2.4 RF diagnostic tool
Rx side : Code 72 = 64 (battery low) + 8 (HF connection OK) Code 200 = 64 (battery low) + 8 (HF connection OK) + 128 (unidirectionel mode) Please check your battery level during flight and compare it to the Rx battery warning level. Stéphane
Posted on: 10/4/2009 7:02 AM by Author "Aquilon"
in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=9145177
RE: Weatronic 2.4 RF diagnostic tool
Range test was stopped around 100 paces without any error. Files go to your mail... Stéphane
Posted on: 9/29/2009 1:42 PM by Author "Aquilon"
in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=9133255
RE: Weatronic 2.4 RF diagnostic tool
That's done... Stéphane
Posted on: 9/29/2009 1:08 PM by Author "Aquilon"
in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=9133181
RE: Weatronic 2.4 RF diagnostic tool
Hello again, Hereafter my data for 2 Saturday’s flights : Multiplex Profi MC4000 Country : France Modulation : ppm-12 Micro 12 receiver + Emcotec DPSI 2001 RV Antennas at 90 degrees on the horizontal plan. Left antenna pointed to the backward fuselage Right antenna pointed to the right side of the fuselage Flight 1 : No failsafe / 4 losses of feedback communication ( 136/168 events ) Flight 2 : No failsafe / 1 losses of feedback communication ( 136/168 events ) Stéphane
Posted on: 9/29/2009 1:00 PM by Author "Aquilon"
in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=9133162
RE: Weatronic 2.4 RF diagnostic tool
Hello Olivier, Don't worry, I will upload my screen copies tonight... [;)] Stéphane
Posted on: 9/29/2009 4:59 AM by Author "Aquilon"
in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=9132292
RE: Weatronic 2.4 RF diagnostic tool
Hello Olivier, I have made 2 flights Saturday morning with my Boomerang XL / Wea 2.4 / Rx Micro 12. I have noticed exactly same as you 3 or 4 times during each flight : "168" code on the TX, with no red led flashing and no failsafe. Best regards. Stéphane
Posted on: 9/28/2009 8:38 AM by Author "Aquilon"
in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=9129369
RE: 2.4 GHz Weatronics, PPM or PCM?
Yes, with the PC connected to the TX module, you can show live data, but not download the stored data after a flight (as far as I know, I don't find it ...). To download the stored data you need to extract the SD card and read it directly by the PC through a card reader. Stéphane
Posted on: 9/25/2009 6:20 AM by Author "Aquilon"
in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=9122406
RE: EvoJet BOOSTER 90
Hello, EvoJet and G-Booster are from the same factory. Different commercial distribution. The new evoJet includes a new quickest kerostart procedure with single fuel line (only one valve and fuel line for easier installation). I have a brand new evoJet 160 on the test bench for two weeks, and it's running perfectly. Flying tests soon on my new ViperJet... Stéphane
Posted on: 4/24/2009 9:41 AM by Author "Aquilon"
in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=8711166
RE: skymaster jiper jet mk2
Fritz, You mention cockpit available for Skygate Viper. But WHERE ? I will receive mine soon, and impossible for me to let the giant cockpit empty ! [;)] Regards. Stéphane
Posted on: 9/9/2008 8:43 AM by Author "Aquilon"
in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=7935995
RE: PST F-84G Build Thread
Hello All, There is now some PST F84G in flying condition. Could you please confirm me the dry weight of this plane ? And the amount of nose lead for correct balance if required. Thanks. Stéphane
Posted on: 6/3/2008 11:37 AM by Author "Aquilon"
in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=7574568
RE: Good business with JetLegend Germany – Gerhard Pollack ?
Hi David, It looks like my Tutor Story [8|][&o] Stéphane
Posted on: 3/12/2008 3:27 AM by Author "Aquilon"
in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=7212996
Good business with JetLegend Germany – Gerhard Pollack ?
Hello everybody, Does somebody in Europe make good business with JetLegend Germany – Gerhard Pollack ? I have ordered and pre-paid a JL Tutor since end of November, and no news about delivery today ! No delivery date confirmed… [:o] I'm fed up to wait more and more, so I ask him to cancel my order and refund me the pre-paid amount, but I have no answer.. Only "please wait !...". [&o] Is he serious guy ? Does somebody have same long long… delay with him ? I am a little bit disappointed... [8|] Thanks for your feedback. Best regards. Stéphane
Posted on: 3/10/2008 7:12 AM by Author "Aquilon"
in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=7202383
RE: Graupner G booster 80 plus arrives
Sandor, The 2 GB80+ that I've seen in flight at Jet Power 2007 was same as mine (see photos) !! The different prototype, similar as the advertising, was only shown on Graupner stand. Stéphane
Posted on: 1/11/2008 3:55 AM by Author "Aquilon"
in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=6847469
|