|
RE: New CGRCjets super scale A-10
Hey Chris, I mostly use TurboCad Pro for Cad work, Xara X pro for vector files and art work. Mach2 and Mach3 for milling. Although, I need to set up the machine again as I fried the last PC that was running it. I also have a vinyl cutter I need to get set back up. I'll probably cut the paint masks for the jepe A-10 from vinyl. I may spring for dry transfers, but we'll see. Cheers...
Posted on: 7/7/2012 7:24 PM by Author "Av8er Tim"
in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=11147055
RE: New CGRCjets super scale A-10
my mind to it yet. I'm watching your build with keen interest. Cheers, Tim
Posted on: 7/7/2012 9:09 AM by Author "Av8er Tim"
in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=11146471
RE: New CGRCjets super scale A-10
... Tim
Posted on: 7/5/2012 9:50 AM by Author "Av8er Tim"
in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=11143964
RE: foamy plans
Bunch of free plans here www.foamyfactory.com Can't beat the 32" Mini 3DX. Still one of my favorites! I have plans posted here http://www.rcgroups.com/forums/showthread.php?t=528756&highlight=foamy+python for a 32" Pitts Python too. You can download the Python and Mini 3DX models for G3.5 over at the Knife Edge G3 downloads page. Have fun! Tim[:D]
Posted on: 4/22/2008 9:47 AM by Author "Av8er Tim"
in the forum "3D Electric Flying!"
http://www.rcuniverse.com/forum/fb.asp?m=7404750
RE: BEST FOAMY FREE PLAN
Go with the Mini 3DX. Echelon plans are still beta and I haven't had time to sort a few things out on it. The mini 3DX rocks and is still one of my all time favorites... Tim H.
Posted on: 4/23/2006 3:01 PM by Author "Av8er Tim"
in the forum "3D Electric Flying!"
http://www.rcuniverse.com/forum/fb.asp?m=4200601
RE: Airfoil for Funtana
PropWrench - What airfoil is used for the Funtana Pro in the PDF? Also, do you have the full plans? I'd like to do a big electric Funtana. Tim [quote]ORIGINAL: PropWrench Ficus, Here is a PDF of a wing layout for a scaled Funtana Pro. I also a 2 Meter Exclusiv Modellbau and I reverse engineered it for a .50 size engine. This file has the exact profile used on the 2M bird. Hope this helps
Posted on: 4/1/2006 11:06 PM by Author "Av8er Tim"
in the forum "Scratch Building, Aircraft Design, 3D/CAD"
http://www.rcuniverse.com/forum/fb.asp?m=4113470
RE: hacker on yak and bipe
prophanger1 - I would go with an APC 11x4.7 to start with. That combo should give about 22oz. thrust at 11 amps. Leave the skin on! It adds tremendously to the stuructural strength of the foam. Tim
Posted on: 1/5/2004 7:56 AM by Author "Av8er Tim"
in the forum "3D Electric Flying!"
http://www.rcuniverse.com/forum/fb.asp?m=1403187
RE: CUTTING OUT FOAMIES FOR YOU!!!
Thanks Insaneclown... No foul... Tim
Posted on: 1/5/2004 12:21 AM by Author "Av8er Tim"
in the forum "3D Electric Flying!"
http://www.rcuniverse.com/forum/fb.asp?m=1402799
RE: Best little electric 3D'er
Hey guys, Here is Josh Glavin flying my new 40" Yak 54 http://www.cafreestyle.com/Videos/3D/FFYak54.wmv (not for the bandwidth impared though, 42mb video) He realy puts it through the wringer and make this little bird sing... Tim H.
Posted on: 12/15/2003 7:53 PM by Author "Av8er Tim"
in the forum "3D Flying!"
http://www.rcuniverse.com/forum/fb.asp?m=1354979
RE: Awesome electric Edge 540T/Foamy Factory Yak 54 videos!
You make me proud Josh! Great flying!!!!!!!! Tim
Posted on: 12/15/2003 12:59 PM by Author "Av8er Tim"
in the forum "3D Flying!"
http://www.rcuniverse.com/forum/fb.asp?m=1354001
RE: awsome awsome video
Here is another awsome video. Pilot is Josh Glavin, airplane is a Foamy Factory Yak 54. http://www.cafreestyle.com/Videos/3D/FFYak54.wmv Tim
Posted on: 12/15/2003 12:04 PM by Author "Av8er Tim"
in the forum "3D Electric Flying!"
http://www.rcuniverse.com/forum/fb.asp?m=1353892
RE: Free 3D Foamy Plans
Udated 3DX plans are now available. www.foamyfactory.com/airplanes.htm
Posted on: 11/19/2003 8:12 AM by Author "Av8er Tim"
in the forum "3D Electric Flying!"
http://www.rcuniverse.com/forum/fb.asp?m=1289338
Free 3D Foamy Plans
Hey guys, free plans are at my website www.foamyfactory.com Lots of setup info and videos too... Enjoy! Tim H.
Posted on: 11/4/2003 12:16 AM by Author "Av8er Tim"
in the forum "3D Electric Flying!"
http://www.rcuniverse.com/forum/fb.asp?m=1250501
RE: WANTED PLANE THAT WILL HOVER
Hey guys, free plans for the 3DX and Ultimate Biplane are on my website. Lots of videos and links for setup too. www.foamyfactory.com Tim H.
Posted on: 11/4/2003 12:14 AM by Author "Av8er Tim"
in the forum "3D Electric Flying!"
http://www.rcuniverse.com/forum/fb.asp?m=1250495
RE: 3D-in Videos......ANYTHING
Foamy 3D... www.foamyfactorymodels.com/videos.htm
Posted on: 11/3/2003 11:46 PM by Author "Av8er Tim"
in the forum "3D Flying!"
http://www.rcuniverse.com/forum/fb.asp?m=1250438
RE: Front Yard 3D+Video
The Himaxx motors are looking pretty promissing. I didn't know the smaller ones were out yet. I'm gonna have to crunch some numbers... Tim
Posted on: 10/30/2003 12:57 AM by Author "Av8er Tim"
in the forum "3D Flying!"
http://www.rcuniverse.com/forum/fb.asp?m=1238987
RE: Front Yard 3D+Video
://www.jetworksmodels.com/yakplans.htm Later, Tim H.
Posted on: 10/30/2003 12:33 AM by Author "Av8er Tim"
in the forum "3D Flying!"
http://www.rcuniverse.com/forum/fb.asp?m=1238948
RE: GWS motor and Gearbox
Yup, they are exactly the same, except the 350 has a different wind motor. More power and more amp hungry. Buoth will work fine... Tim
Posted on: 10/20/2003 11:11 PM by Author "Av8er Tim"
in the forum "3D Flying!"
http://www.rcuniverse.com/forum/fb.asp?m=1216534
RE: Front Yard 3D+Video
3/16" every 2 inches won't hurt anything. Every printer driver treats the pdf a little differently so variations do occur. However, make sure that the "fit to page" and "auto rotate" boxes are NOT checked in the Acrobat print dialouge box when you print the plans. Most errors occur if those are checked. Tim
Posted on: 10/15/2003 8:00 PM by Author "Av8er Tim"
in the forum "3D Flying!"
http://www.rcuniverse.com/forum/fb.asp?m=1204910
RE: Front Yard 3D+Video
commercialy (ie advertising, etc.) Have fun with them though!!!!!! Tim
Posted on: 10/10/2003 1:02 PM by Author "Av8er Tim"
in the forum "3D Flying!"
http://www.rcuniverse.com/forum/fb.asp?m=1193164
RE: Front Yard 3D+Video
The Mpjets are not the most efficient brushless. I would say they do OK and that's about it... The Razor 400 in a GWS 5.3:1 (CS gearing) does just as well as the 350 in a D gearbox. The 400's are a bit easier to find too... aero_eng - You just cut the trottle before you touch down and make sure you touch down nose high. I have yet to break a prop on a planned arrival... Tim
Posted on: 10/8/2003 11:13 PM by Author "Av8er Tim"
in the forum "3D Flying!"
http://www.rcuniverse.com/forum/fb.asp?m=1190056
RE: Front Yard 3D+Video
Jimmy - It should work fine. However, I have not tried it... OK guys, I just posted a new Yak 54 video. It rocks! www.foamyfactory.com/videos.htm Tim
Posted on: 10/2/2003 11:21 PM by Author "Av8er Tim"
in the forum "3D Flying!"
http://www.rcuniverse.com/forum/fb.asp?m=1177736
RE: Front Yard 3D+Video
So far, looks like the thread survided the switch. I know more cahnges are being made, hopefuly no surprises... Tim[8D]
Posted on: 9/12/2003 3:38 PM by Author "Av8er Tim"
in the forum "3D Flying!"
http://www.rcuniverse.com/forum/fb.asp?m=1132107
Front Yard 3D+Video
Hey guys, I just posted a new 30" UB video. It's pretty wild! Check it out. Its the video at the bottom of the page [url]www.foamyfactory.com/videos.htm[/url] Tim
Posted on: 9/5/2003 3:55 PM by Author "Av8er Tim"
in the forum "3D Flying!"
http://www.rcuniverse.com/forum/fb.asp?m=785864
Front Yard 3D+Video
[QUOTE][i]Originally posted by vertical ts [/i] [B]hey tim,when can we hope for plans?,It looks great!! [/B][/QUOTE] I'd say 1 to 2 weeks for the Yak 54 plans... PlaneInsane - Looks awsome! Woooo Hoooooo!!!!! Tim
Posted on: 9/3/2003 4:53 PM by Author "Av8er Tim"
in the forum "3D Flying!"
http://www.rcuniverse.com/forum/fb.asp?m=785861
Front Yard 3D+Video
, can you order no wind... Tim PS - Here is mycamel's (Mike H.) Edge #1 video [url]www.foamyfactory.com
Posted on: 9/3/2003 4:33 AM by Author "Av8er Tim"
in the forum "3D Flying!"
http://www.rcuniverse.com/forum/fb.asp?m=785858
Front Yard 3D+Video
OK guys, here's a sneak peek at what's to come from the foamyfactory skunkworks... Yak 54 WS - 36" Power - GWS EPS350C-DS (6.6:1) Prop - GWS 12x6 Batt - 8 Sanyo AAA 720ma NiMh Brushless set-up Same as above with Razor 350 and 3s1p 1200ma E-Tec Lipo Same set-up as the 3DX and 30" Ultimate bipe. Tim H.:D
Posted on: 9/3/2003 2:56 AM by Author "Av8er Tim"
in the forum "3D Flying!"
http://www.rcuniverse.com/forum/fb.asp?m=785855
Front Yard 3D+Video
That stuff is pretty heavy. I'd try to find the blue fan fold. If you can't find that, I'd get some 6mm Depron from [url]www.depronusa.com[/url] Tim
Posted on: 8/29/2003 3:54 AM by Author "Av8er Tim"
in the forum "3D Flying!"
http://www.rcuniverse.com/forum/fb.asp?m=785854
Front Yard 3D+Video
. Brushless is the way to go, but the stock combo is still a potent power choice. Tim
Posted on: 8/28/2003 1:34 AM by Author "Av8er Tim"
in the forum "3D Flying!"
http://www.rcuniverse.com/forum/fb.asp?m=785852
Front Yard 3D+Video
. It will do a climbing inverted flat spin too. later, Tim
Posted on: 8/28/2003 12:08 AM by Author "Av8er Tim"
in the forum "3D Flying!"
http://www.rcuniverse.com/forum/fb.asp?m=785848
| 
