tail rotor system for sea king ???
Hello, I'm thinking about installing an X-cell gas mechanics into a century Westland sea king body. Id like to know what option will work well for the tail rotor system. Should I use the flexible method or should I use the torque tube and gear box system . I know that Vario has also a very good mechanics but they cost as hell. Thanks.
Posted on: 5/18/2008 2:28 PM by Author "avi sirota" in the forum "Scale RC Helicopters"
http://www.rcuniverse.com/forum/fb.asp?m=7510758

RE: Mini Heli Setup
be tricky... Thanks for the information, always good to hear other flyers' opinions. Avi.
Posted on: 8/3/2006 10:58 PM by Author "Avi__" in the forum "T-Rex heli"
http://www.rcuniverse.com/forum/fb.asp?m=4581054

Mini Heli Setup
what these forums are here for right...? Thanks, Avi.
Posted on: 8/3/2006 12:26 PM by Author "Avi__" in the forum "T-Rex heli"
http://www.rcuniverse.com/forum/fb.asp?m=4578867

Dragonfly 60 and general ehli stup
all newbies questions, but that's what these forums are here for right...? Thanks, Avi.
Posted on: 8/3/2006 12:22 PM by Author "Avi__" in the forum "Walkera Helis - Dragonfly, etc.."
http://www.rcuniverse.com/forum/fb.asp?m=4578853

RE: New Mini Electric is here the Falcon 3D!!
More comments about gyro and revolution... I think one of the things that make it hard for beginer micro heli pilots would be the simplicity of the radio system. In a computerized radio system you have a revolution mixer, which compansates for the forces generated when the pitch is changed. Such mixer allows you to hover without the need of a hh gyro. I can see why a HH is almost a must if you don't have that. Anyway, thanks again for the information.
Posted on: 7/25/2006 2:16 PM by Author "Avi__" in the forum "RC Helicopter Beginners Forum"
http://www.rcuniverse.com/forum/fb.asp?m=4543278

RE: New Mini Electric is here the Falcon 3D!!
I am asking about the blades becuase I would like to make the order of the heli with an additional set of blades already. What aerobatics were you able to perform with the wooden blades? Thanks, Avi.
Posted on: 7/25/2006 12:05 PM by Author "Avi__" in the forum "RC Helicopter Beginners Forum"
http://www.rcuniverse.com/forum/fb.asp?m=4542769

RE: New Mini Electric is here the Falcon 3D!!
/t-rex fit? Thanks again, Avi.
Posted on: 7/25/2006 9:29 AM by Author "Avi__" in the forum "RC Helicopter Beginners Forum"
http://www.rcuniverse.com/forum/fb.asp?m=4542276

RE: New Mini Electric is here the Falcon 3D!!
Ok, then it's CPM and not CCPM. Good, since my transmitter does not have a CCPM mix. Anyway, thanks for all the information. Avi.
Posted on: 7/25/2006 9:12 AM by Author "Avi__" in the forum "RC Helicopter Beginners Forum"
http://www.rcuniverse.com/forum/fb.asp?m=4542228

RE: New Mini Electric is here the Falcon 3D!!
And yet another question... You mentioned the Thunder Power 2100ma pack, and said that it was tight. This pack measures 4 x 1-1/4 x 3/4". Was is tight on the length or width? All in all, what are the maximal measurements for a battery to fit in? Thanks allot, Avi.
Posted on: 7/25/2006 2:40 AM by Author "Avi__" in the forum "RC Helicopter Beginners Forum"
http://www.rcuniverse.com/forum/fb.asp?m=4541756

RE: New Mini Electric is here the Falcon 3D!!
The knobs you are mentioning allow you to change the head speed. While hovering, increase pitch and reduce throttle to get a lower head spee, or increase throttle and reduce pitch to get a higher head speed. Higher RPM will make the heli feel more crispy, and less prune to rev problems with pitch change (though the heading hold gyro should take care of that anywya). The rotors will also have more energy, wihch means you can have nicer autorotations. Lower RPM will be the oposite, but you will get longer runtimes.
Posted on: 7/24/2006 9:54 PM by Author "Avi__" in the forum "RC Helicopter Beginners Forum"
http://www.rcuniverse.com/forum/fb.asp?m=4540685

RE: New Mini Electric is here the Falcon 3D!!
Hi. Thanks for all the information. I am not sure I got it right, though, about the ccpm. My transmitter (Futaba 8UAH) does not have ccpm mixing. Would it work with the heli? Thanks, Avi.
Posted on: 7/24/2006 9:18 PM by Author "Avi__" in the forum "RC Helicopter Beginners Forum"
http://www.rcuniverse.com/forum/fb.asp?m=4540523

RE: New Mini Electric is here the Falcon 3D!!
. Thanks, Avi.
Posted on: 7/24/2006 4:49 PM by Author "Avi__" in the forum "RC Helicopter Beginners Forum"
http://www.rcuniverse.com/forum/fb.asp?m=4539514

RE: What type of glue to use
I have just tested some of the glue on wood blocks. I got them barely damp, put the glue on them, and pushed them together with some masking tape. At first I tried to breakit using a steel table, but it didn't. So then, I put it in a vice and hit the top block with a hammer. It survived five hits, then it broke. The wood was the only thing to brreak, not where I had glued. So, Gorilla Glue seems like the right thing.
Posted on: 6/26/2006 7:17 PM by Author "AVI Flyer" in the forum "Questions and Answers"
http://www.rcuniverse.com/forum/fb.asp?m=4434079

What type of glue to use
A while ago, I purchased a hobbico Avistar plane, and only now I am starting to build it. I would like to know what kind of glue to use, the CA stuff, or Gorilla Glue? The only thing that I have read was to be "careful" when using Gorilla Glue. And if Gorilla glue is to be used, then how to I strap the parts down? It says on the package that I should put something heavy on it, or strap it somehow. So do I just use some masking tape? I am just afraid that I might damage the balsa.
Posted on: 6/26/2006 6:51 PM by Author "AVI Flyer" in the forum "Questions and Answers"
http://www.rcuniverse.com/forum/fb.asp?m=4433981

Is RealRace realistic?
of the previous version work with G2? Thanks, Avi.
Posted on: 8/11/2004 2:59 AM by Author "Avi__" in the forum "RC Car General Discussions"
http://www.rcuniverse.com/forum/fb.asp?m=2074174

thanks
maybe who buy an 3D Flip she have the plan can somwone scan the plan and send me a e-mail thank you very much ''Welsh3D''can i talk with you on e-mail i whant to now much more about you.Bye
Posted on: 7/27/2003 7:59 PM by Author "Avi-Cat" in the forum "3D Flying!"
http://www.rcuniverse.com/forum/fb.asp?m=996733

Can you help me?
Hello everyone!! Have someone the plans of the Flip3D Rc planes?Because i'whant to make one not to buy one please help me.Thank you wery much
Posted on: 7/27/2003 7:22 PM by Author "Avi-Cat" in the forum "3D Flying!"
http://www.rcuniverse.com/forum/fb.asp?m=996731

Help me
Hello everyone!! Have someone the plans of the Flip3D Rc planes?Because i'whant to make one not to buy one please help me.Thank you wery much
Posted on: 7/26/2003 8:44 PM by Author "Avi-Cat" in the forum ""1/2 A" & "1/8 A" airplanes"
http://www.rcuniverse.com/forum/fb.asp?m=994353