|
RE: School Me on Fixing My DLE 20 With a Bent Crank
Spinnerow Remove the cylinder, remove the rear crankcase half. Then use a flat tip punch on the outer bearing race to reseat the crankshaft bearing back into the front case half and your feeling of a bad bearing or bent crank will be gone.
Posted on: 9/13/2012 8:51 AM by Author "BR1"
in the forum "Gas Engines"
http://www.rcuniverse.com/forum/fb.asp?m=11227264
RE: NEO 25 890kv set up for 3D flying
thank you for what you gave me to go off of, and the extra i have is a seagull models 42" extra 300. I also dont believe they make this plane any more but if that helps please let me know.
Posted on: 9/9/2012 10:14 AM by Author "BR1"
in the forum "3D Electric Flying!"
http://www.rcuniverse.com/forum/fb.asp?m=11222791
RE: NEO 25 890kv set up for 3D flying
come on now someone has to have something for me??
Posted on: 9/8/2012 4:31 PM by Author "BR1"
in the forum "3D Electric Flying!"
http://www.rcuniverse.com/forum/fb.asp?m=11222128
NEO 25 890kv set up for 3D flying
I have a 42inch extra that i want to set up for 3D flight and was wondering if the motor i have will be enough and if so does anyone know what size speed control would be ideal for it as well as prop an bat?? the speed control rang that is recommended is a 40amp to 60 amp. Anything will help!
Posted on: 9/7/2012 5:13 PM by Author "BR1"
in the forum "Brushed/Brushless motors, speed controls, gear drives"
http://www.rcuniverse.com/forum/fb.asp?m=11221191
NEO 25 890kv set up for 3D flying
I have no idea where to start with a set up for my extra 300 when it comes to what to run with my NEO 25 motor anything will help!?? esc, bat, prop, ect
Posted on: 9/7/2012 2:08 PM by Author "BR1"
in the forum "3D Electric Flying!"
http://www.rcuniverse.com/forum/fb.asp?m=11221027
RE: Let's show our Scale Planes off
Hello Donnyman great to see your Bulldog in all its splendor.
Posted on: 7/2/2012 9:09 AM by Author "BR1"
in the forum "RC Scale Aircraft"
http://www.rcuniverse.com/forum/fb.asp?m=11139856
RE: Vertigo II Build Thread
Is the Vertigo II being kitted again? Please tell me yes I had one back in the day and would love to build another. I wish I could open your pictures on RCU but it just reads loading no pictures. Thanks
Posted on: 6/9/2012 6:41 AM by Author "BR1"
in the forum "Classic RC Pattern Flying"
http://www.rcuniverse.com/forum/fb.asp?m=11112195
RE: Hall Springfield Bulldog build
Hello BigPhil Just wondering how you are progressing on the Bulldog. Have a great day
Posted on: 4/19/2012 6:38 AM by Author "BR1"
in the forum "RC Scale Aircraft"
http://www.rcuniverse.com/forum/fb.asp?m=11048366
RE: Has anyone tried the new PTE36R ?
Too much heat will kill the magnet be carefull
Posted on: 4/6/2012 5:57 AM by Author "BR1"
in the forum "Gas Engines"
http://www.rcuniverse.com/forum/fb.asp?m=11030498
RE: My DLE 55 does not like to pull fuel to the carb after it sets for a while.
Sorry I was referring to the gas flow needle and seat on Walbro carburators.
Posted on: 4/4/2012 7:47 AM by Author "BR1"
in the forum "Gas Engines"
http://www.rcuniverse.com/forum/fb.asp?m=11027906
RE: My DLE 55 does not like to pull fuel to the carb after it sets for a while.
Gentlemen For what its worth I have found the tip of the needle stuck in the seat after a lengthy storage time on three occasions at least. Might be worth a look at beginning of the flying season.
Posted on: 4/3/2012 9:22 AM by Author "BR1"
in the forum "Gas Engines"
http://www.rcuniverse.com/forum/fb.asp?m=11026670
RE: Hall Springfield Bulldog build
No Big Phil your just taking me down memory lane with your construction of the Bulldog. Mine remains on top of my entertainment center in the living room no less.
Posted on: 3/6/2012 5:28 AM by Author "BR1"
in the forum "RC Scale Aircraft"
http://www.rcuniverse.com/forum/fb.asp?m=10988476
RE: Hall Springfield Bulldog build
Hello Big Phil I am still watching your progress also keep up the good work.
Posted on: 3/5/2012 10:28 AM by Author "BR1"
in the forum "RC Scale Aircraft"
http://www.rcuniverse.com/forum/fb.asp?m=10987515
RE: DLE 20 Installed in VQ P-40
I put a DLE20 in my Hanger 9 P40 no mess, no cooling problems, no worry love it. Vertices's to die for.
Posted on: 1/18/2012 8:40 AM by Author "BR1"
in the forum "Gas Engines"
http://www.rcuniverse.com/forum/fb.asp?m=10915127
RE: Club Enya
Anybody have a head assembly and vale cover for a Enya 80 4 c
Posted on: 11/20/2011 6:53 AM by Author "BR1"
in the forum "Glow Engines"
http://www.rcuniverse.com/forum/fb.asp?m=10820579
RE: WingSpan Retracts into a Hangar 9 P-40
Hope the pictures loaded
Posted on: 11/20/2011 6:46 AM by Author "BR1"
in the forum "RC Warbirds and Warplanes"
http://www.rcuniverse.com/forum/fb.asp?m=10820573
RE: WingSpan Retracts into a Hangar 9 P-40
Just got Hanger 9 P 40 and installed a DLE 20 in it what a joy to fly and talk about fuel economy. Love it
Posted on: 11/17/2011 6:58 AM by Author "BR1"
in the forum "RC Warbirds and Warplanes"
http://www.rcuniverse.com/forum/fb.asp?m=10816257
RE: Hall Springfield Bulldog build
Glade to see your progressing with the Bulldog. The work is excellent can't wait to see the end results.
Posted on: 11/13/2011 6:49 AM by Author "BR1"
in the forum "RC Scale Aircraft"
http://www.rcuniverse.com/forum/fb.asp?m=10809621
RE: Hall Springfield Bulldog build
Hello Bigphil Just wondering if you have made any progress on your Bulldog. I've missed reading about your project and how it is developing.
Posted on: 7/29/2011 6:24 AM by Author "BR1"
in the forum "RC Scale Aircraft"
http://www.rcuniverse.com/forum/fb.asp?m=10644704
RE: Hall Springfield Bulldog build
Morning Bigphil I haven't seen any updates of late on your Bulldog now that you got me hooked. I am enjoying your build please don't give up. Thanks
Posted on: 4/27/2011 6:42 AM by Author "BR1"
in the forum "RC Scale Aircraft"
http://www.rcuniverse.com/forum/fb.asp?m=10487682
RE: Hall Springfield Bulldog build
Ok Bigphil I will describe the flight from and observers point of view along with the gentlemen who flew it for me. 1) Take off early rudder required 2) Flight rudder and elevator very effective ailerons sluggish ( recommend coupled rudder ailerons) 3) Power off glide very good 4) Landing (off field) to be determined later Surface deflections: Rudder 3/4 left 3/4 right Elevator 3/4 up 3/4 down Ailerons 1 up 3/4 down Hope this helps
Posted on: 4/7/2011 8:03 AM by Author "BR1"
in the forum "RC Scale Aircraft"
http://www.rcuniverse.com/forum/fb.asp?m=10448749
RE: Hall Springfield Bulldog build
Interesting wing attachment simple but effective. Please show us more and keep up the good work.
Posted on: 4/6/2011 6:18 AM by Author "BR1"
in the forum "RC Scale Aircraft"
http://www.rcuniverse.com/forum/fb.asp?m=10446399
RE: Hall Springfield Bulldog build
Nice job with the planking Bigphil. I agree that the wing mounting system is a weak point. There is not much of a glue area for the root rib to glue to, so I hope you find a better mounting system. If you do use the current system be sure to support the wing so it doesn't hang on the root rib until the wing strut is attached. One other tip use longer bolts than necessary and grind the ends of the bolt to a point. This will help to locate and guide the bolt into the blind nuts. I found with mine that the bolt threads would catch on the plate and would push the blind nut out as I screwed the bolts in. I also used this trick on bottom of the strut to locate the strut attach point. I hope this helps your doing a great job.
Posted on: 3/27/2011 7:47 AM by Author "BR1"
in the forum "RC Scale Aircraft"
http://www.rcuniverse.com/forum/fb.asp?m=10425663
RE: Home built two stroke engine!
Goggle MYT engine from Angel Labs. Might be the engine to solve all our problems.
Posted on: 3/21/2011 6:37 AM by Author "BR1"
in the forum "Gas Engines"
http://www.rcuniverse.com/forum/fb.asp?m=10413352
RE: Hall Springfield Bulldog build
Good morning bigphil Just got in on your build and it looks like your doing a fine job. My Bulldog suffered a bad landing requiring a little repair. Now that the repairs are complete I have found that I have no compression in one of the cylinders on my 3W 150 probably from dirt .
Posted on: 3/18/2011 10:16 AM by Author "BR1"
in the forum "RC Scale Aircraft"
http://www.rcuniverse.com/forum/fb.asp?m=10407879
RE: What Aircraft are you installing your DLE20
Just finished installing my DLE20 in a Thunder Tiger Rare Bear, perfect fit. Will fly as soon as the wind lets up.
Posted on: 2/9/2011 8:43 AM by Author "BR1"
in the forum "Gas Engines"
http://www.rcuniverse.com/forum/fb.asp?m=10323257
RE: joining alu tube?
Try Muggy weld they have products and video demonstrations.
Posted on: 1/15/2011 12:32 PM by Author "BR1"
in the forum "Tips & Techniques"
http://www.rcuniverse.com/forum/fb.asp?m=10265614
RE: Invert's Fiberglassing Technique 101
Gentlemen. Peel ply is available from Aircraft Spruce Co. Check the inter-net
Posted on: 1/15/2011 12:10 PM by Author "BR1"
in the forum "RC Warbirds and Warplanes"
http://www.rcuniverse.com/forum/fb.asp?m=10265565
RE: Anyone familiar with the TMM 53cc gasser?
I have been flying my Katana for two seasons now and enjoy the easy start power of the TMM 53engine. Only problem I ve had is the threads in the prop hub seem to strip easily. I don't believe I am too heavy handed but I have lost two hubs.
Posted on: 7/31/2010 11:03 AM by Author "BR1"
in the forum "Gas Engines"
http://www.rcuniverse.com/forum/fb.asp?m=9901116
RE: Hall Bulldog Racer ARF
Vampire Thanks for the inquire about the Bulldog. The 97" Bulldog plans are from Don Neill ( his son Gary is selling the plans). The Bulldog is powered by a 3W 150 and weighs in at 42 lbs.The wood came from Precision Kit Cutters. A good friend of mine did the construction while my Grandson and I covered with it Stits, built the cowl ,wheel pants,dummy engine, detailed (rib stitched and installed rivets) and painted it with Aerothane. Yes she flew though the flight was short due to a engine out. It was exciting to see it in the air and hear the drone of the 3w 150. Unfortunately the landing fell a little short of the field probably because of the high wing loading. The repairs are well on the way and it will be flown again.
Posted on: 4/27/2010 6:36 PM by Author "BR1"
in the forum "ARF or RTF"
http://www.rcuniverse.com/forum/fb.asp?m=9693535
| 
