RE: XYZ Ignition problems. Engine won't start. NEED HELP
[quote]ORIGINAL: kwik [quote]ORIGINAL: BadAzzMaxx They do not come with a RCexl ignition.. Milton [/quote] Milton, surely you dont know what Hobbyking is shipping? Or ? [/quote] Yes I know what Hobby King ships with there engines, They ship what the manufacture sends with there engine, XYZ makes there own ignitions and what you see in post 19 is what comes with them. Would like to see pictures
Posted on: 9/17/2012 9:00 PM by Author "BadAzzMaxx" in the forum "Gas Engines"
http://www.rcuniverse.com/forum/fb.asp?m=11231914

RE: RCAero JC Engines & YDA Engines
I have some front cases here that were traded in for the 30cc. They are used and have the crank and bearings installed, If you want one sent about $7.00 for shipping and i will send you one. Milton [quote]ORIGINAL: JVB I was flying my JC 28 Evo this weekend. The engine has run flawlessly to this point. During my first flight, it started sounding different, so I landed. The prop hub was loose (had play from side to side). The front bearing was spinning in the housing. Tore the engine down today and the front bearing fell out. You could easily see that it had been turning in the case. The internals of the engine were perfect. Plenty of oil, etc. Piston looked great. I probably have no more than two gallons of fuel through it. How should the crank be removed from the rear bearing? Is the case trashed as I assume that a new bearing will not fit tightly anymore? If I need a new case, does anyone still carry parts for the 28? Thanks. [/quote]
Posted on: 9/17/2012 11:31 AM by Author "BadAzzMaxx" in the forum "Gas Engines"
http://www.rcuniverse.com/forum/fb.asp?m=11231297

RE: XYZ Ignition problems. Engine won't start. NEED HELP
That is what I had seen in the past, They do not come with a RCexl ignition, It is a knock off of RCexl just not a very good one. Milton
Posted on: 9/16/2012 7:51 PM by Author "BadAzzMaxx" in the forum "Gas Engines"
http://www.rcuniverse.com/forum/fb.asp?m=11230569

RE: XYZ Ignition problems. Engine won't start. NEED HELP
[quote]ORIGINAL: kwik I have the XYZ53 cc as well. I have had lots of trouble with the RcExcl Ignitions. The engine came with RcExl ignition originally. I have used a 5 V regulator to avoid damage. The original ignition only lasted a while . I am on the third ignition now. The last two I bought; One of them gives no spark whatsoever. The other one works. sort of. [/quote] Did not know that the XYZ came with a RCexl ignition. Is it possible for you to post some picks of the ignition box saying they are RCexl. We had a XYZ twin that we had to get a new ignition for but the original ignition was not a RCexl. If it looks like the picture below or is silver case it is not a Rcexl ignition. Thanks Milton
Posted on: 9/16/2012 8:34 AM by Author "BadAzzMaxx" in the forum "Gas Engines"
http://www.rcuniverse.com/forum/fb.asp?m=11229964

RE: School Me on Fixing My DLE 20 With a Bent Crank
Are you sure the crank is bent or just the prop hub bolt, 90% of the time it is just the prop hub bolt and can be re alined very easy. Milton
Posted on: 9/12/2012 10:44 PM by Author "BadAzzMaxx" in the forum "Gas Engines"
http://www.rcuniverse.com/forum/fb.asp?m=11226894

RE: Ignition Module failure
[quote]ORIGINAL: Lifer Thanks for the replies, but I still have the same question: How can it produce a spark but not allow the engine to fire? I replaced the old unit with a new one and it fired right up. Again, does anyone know how the old one can spark, but not support the engine to run? [/quote] If the coil is weak it will fire the plug when not under pressure but will not fire when the plug has pressure from being installed in the cylinder. Also the spark will go to the point of less resistant, If there is a bad place in the silicone plug cap it will fire the plug when plug is not under pressure but will fire inside the cap when the plug is under pressure. Milton
Posted on: 9/10/2012 6:33 AM by Author "BadAzzMaxx" in the forum "Gas Engines"
http://www.rcuniverse.com/forum/fb.asp?m=11223575

RE: Husky 4.4 need a prop hub
Send it to Ralph, He can either fix it or make you a new one. Milton
Posted on: 8/22/2012 10:04 AM by Author "BadAzzMaxx" in the forum "Gas Engines"
http://www.rcuniverse.com/forum/fb.asp?m=11202209

RE: Where to go for ZDZ service
I don't think it is where to get service, The problem is getting the parts. Milton
Posted on: 8/21/2012 9:41 AM by Author "BadAzzMaxx" in the forum "Gas Engines"
http://www.rcuniverse.com/forum/fb.asp?m=11200934

RE: Larger CC gas motors.
GT 80 twin. Milton
Posted on: 8/13/2012 10:20 AM by Author "BadAzzMaxx" in the forum "Gas Engines"
http://www.rcuniverse.com/forum/fb.asp?m=11191687

RE: Home made header supplies???
https://www.krumscheid-metallwaren.de/neu/shop.php?lang=EN Sometimes it takes weeks to get them. Milton
Posted on: 8/12/2012 8:58 PM by Author "BadAzzMaxx" in the forum "Gas Engines"
http://www.rcuniverse.com/forum/fb.asp?m=11191120

RE: SV 50cc
http://www.youtube.com/watch?v=GBXFpxWg7vY http://www.rcextremepower.net/ignition_timing.html Milton
Posted on: 8/9/2012 6:01 AM by Author "BadAzzMaxx" in the forum "Gas Engines"
http://www.rcuniverse.com/forum/fb.asp?m=11186764

RE: G20 sensor.
The sensor will work but the connecter is different. Milton
Posted on: 8/7/2012 7:18 PM by Author "BadAzzMaxx" in the forum "Gas Engines"
http://www.rcuniverse.com/forum/fb.asp?m=11184963

RE: Single Bolt Prop Adapter
Don't know if these will work but they are cheap enough to give a try. http://www.hobbyking.com/hobbyking/store/__21287__Single_Bolt_Prop_Adapter_For_RCG_DLA_DM_HP_50_55cc_Gas_Engines_.html http://www.hobbyking.com/hobbyking/store/__21288__Single_Bolt_Prop_Adapter_For_RCG_DLE30_.html Milton
Posted on: 8/7/2012 10:23 AM by Author "BadAzzMaxx" in the forum "Gas Engines"
http://www.rcuniverse.com/forum/fb.asp?m=11184368

RE: FPE 2.4 Ridge Ignition
Can you post a picture. Also if the crank and prop hub are a taper fit you can relocate the prop hub to time the engine, You have to remove the key, The key does nothing for holding the prop hub, The taper fit is what holds the prop hub in place. Milton
Posted on: 8/7/2012 7:53 AM by Author "BadAzzMaxx" in the forum "Gas Engines"
http://www.rcuniverse.com/forum/fb.asp?m=11184198

RE: FPE 2.4 Ridge Ignition
Ignitions have different plug caps for different plugs, You order according to what plug you have. The BPMR6A is a 3/4 hex plug. You can do it yourself if you know how to mount the sensor in the right place or get the magnet in the right location for it to be timed at 28 deg before top dead center. Here are a couple links showing how to time the engine. http://www.youtube.com/watch?v=GBXFpxWg7vY http://www.rcextremepower.net/ignition_timing.html Milton
Posted on: 8/7/2012 6:36 AM by Author "BadAzzMaxx" in the forum "Gas Engines"
http://www.rcuniverse.com/forum/fb.asp?m=11184069

RE: DLE vs 3W,DA,Zenoah even OS
Fuji are no longer being sold, You could pick up a used one, But there is no parts for them. Milton
Posted on: 8/2/2012 9:17 PM by Author "BadAzzMaxx" in the forum "Gas Engines"
http://www.rcuniverse.com/forum/fb.asp?m=11179240

RE: ZP Zenoah Engine Availability
Here is the deal of the month for a G62 engine if there is nothing wrong with it. http://www.rcuniverse.com/market/item.cfm?itemId=860681 Milton
Posted on: 8/2/2012 8:39 AM by Author "BadAzzMaxx" in the forum "Gas Engines"
http://www.rcuniverse.com/forum/fb.asp?m=11178421

RE: G-45/ 2 Questions for a newbie
Yes, You could put the tank in the tail of the plane and it still draw fuel, A good working Walbro carb will draw fuel straight up for 3 feet. As to the tank size, That is all in how long you want to fly at one time, Most of the time a 24 oz is plenty large enough. Milton
Posted on: 8/1/2012 6:01 PM by Author "BadAzzMaxx" in the forum "Gas Engines"
http://www.rcuniverse.com/forum/fb.asp?m=11177786

RE: RCAero JC Engines & YDA Engines
[quote]ORIGINAL: laryboy i took apart my jc 28 to clean carb when i looked inside the reed block. i was expecting to see a little window with material screwed onto it to allow fuel and air in but not out. i didnt see anything at all.nothing in there . any explaination?....................larry [/quote] ??????? Also Picture Do not see how it could even run that way. Milton
Posted on: 7/19/2012 6:44 AM by Author "BadAzzMaxx" in the forum "Gas Engines"
http://www.rcuniverse.com/forum/fb.asp?m=11160990

RE: DLE 55 Crank Broke in Flight
Not hard if you have done it before, The whole crank system will have to be replaced which means a total engine breakdown. Milton
Posted on: 7/18/2012 8:18 AM by Author "BadAzzMaxx" in the forum "Gas Engines"
http://www.rcuniverse.com/forum/fb.asp?m=11159848

RE: Zenoah G 20 EI bad ign. mod.
We have a conversion kit, you remove two screws mount the new sensor and you are ready to go. The old sensor will work also, You can change the connector on the the old sensor to a futaba connector to match the RCexl. Milton
Posted on: 7/16/2012 6:44 PM by Author "BadAzzMaxx" in the forum "Gas Engines"
http://www.rcuniverse.com/forum/fb.asp?m=11158017

RE: hard starting DA50
Coke on, 3/4 throttle, flip till it pops, choke off, high idle. Flip and it should start in 4-6 flips. Might have to do this a couple time but most will work after one time. If tuned right and cold you will not be able to get full throttle until engine warms up. As always make sure plane is tied off or someone is holding the plane. Milton
Posted on: 7/15/2012 8:43 PM by Author "BadAzzMaxx" in the forum "Gas Engines"
http://www.rcuniverse.com/forum/fb.asp?m=11156779

RE: 3W75- Where to send for service
If the carb was changed check to make sure the carb pump pulse hole line up. The is a small hole in the base of the carb that should line up with the hole in the carb plate. If that looks right remove the 4 screws holding the plate over the diaphragm , Carefully remove the diaphragm, rub a little oil on the side facing the carb and re install. Milton
Posted on: 7/14/2012 6:36 AM by Author "BadAzzMaxx" in the forum "Gas Engines"
http://www.rcuniverse.com/forum/fb.asp?m=11154765

RE: Identify these motors
The Twin is a Air Hobbies who have now changed there name. Milton
Posted on: 7/13/2012 12:28 PM by Author "BadAzzMaxx" in the forum "Gas Engines"
http://www.rcuniverse.com/forum/fb.asp?m=11154044

RE: brave heart 85 parts
Here is the picture he sent me, All the reeds I have only have two paddles on them. If you could sent a picture of the reed block with measurements, A whole reed block from another engine might work. Milton
Posted on: 7/13/2012 11:41 AM by Author "BadAzzMaxx" in the forum "Gas Engines"
http://www.rcuniverse.com/forum/fb.asp?m=11153995

RE: RCEXLEngine-Kill-Switch
I have sold a lot of them in the last couple years and have not had one to come back. Just make sure you set the channel it is on to full travel. Milton
Posted on: 7/12/2012 2:06 PM by Author "BadAzzMaxx" in the forum "Gas Engines"
http://www.rcuniverse.com/forum/fb.asp?m=11152969

RE: brave heart 85 parts
Other engine reeds might work, Can you post a picture of the reed. Milton
Posted on: 7/12/2012 11:32 AM by Author "BadAzzMaxx" in the forum "Gas Engines"
http://www.rcuniverse.com/forum/fb.asp?m=11152763

RE: Dla 112 Vs Dm 111
[quote]ORIGINAL: rpaulflyer Hey guys, I am considering buying because of price one of the gas engines listed above for my extra 300L , not being too familar with the larger engines I could use some help from those flyers that know these engines. Which would be the best choice for reliability, power, and durability, with less problems. I appreciate any info you can give me. Thanks . [/quote] From the post about one being a DM engine I am thinking you are talking Hobby King web site. The only suggestion I would make if you are new to gas engines is to buy one from a US dealer that has good support even if it cost $100.00 more. You will be ahead of the game in the long run. Milton
Posted on: 7/11/2012 9:36 PM by Author "BadAzzMaxx" in the forum "Gas Engines"
http://www.rcuniverse.com/forum/fb.asp?m=11152149

RE: JC 28cc exchange program
I can no longer do the exchange program and do not know if it is still good or not. If you are wanting to make the exchange contact JC direct and see if it is still available. www.jcengine.com Milton
Posted on: 7/8/2012 7:23 AM by Author "BadAzzMaxx" in the forum "Gas Engines"
http://www.rcuniverse.com/forum/fb.asp?m=11147388

RE: RCexl ignition to Evolution/MVVS engines
[quote]ORIGINAL: pe reivers I know, but... It works. If it does not, there is a major cooling issue. Better to have your plane come down with reduced power, than to fry your engine. [/quote] ???????????? Milton
Posted on: 6/19/2012 2:25 PM by Author "BadAzzMaxx" in the forum "Gas Engines"
http://www.rcuniverse.com/forum/fb.asp?m=11124197