RE: Just got my first plane and need some help
Go Horizon hobby, scroll to bottom and use the field locator to find a field nearest you. Hope the link works http://www.horizonhobby.com/content/_field-locator_render-field-locator
Posted on: 4/1/2012 10:05 AM by Author "Bashfulbob" in the forum "Beginners"
http://www.rcuniverse.com/forum/fb.asp?m=11023702

RE: Just got my first plane and need some help
Hi I have the Spitfire by Dynam and the control rods attach to the control horns with the same equipment and the same manner that you have. What I did was to install clevis in the control horn with the nuts loose. I then put the control rods through and tightened the screw to the control rods and tightened the nuts up. i then checked to make sure the rudder and elevator stab were centered with the servos and radio controls. I then loosened up the clevis control horn nuts up a tad and applied lock tight blue and retightened the nuts up. The Dynam TX I got with the plane has places to hook up a buddy cord, BUT no toggle switch to use for a buddy system. Hope that helps
Posted on: 4/1/2012 8:20 AM by Author "Bashfulbob" in the forum "Beginners"
http://www.rcuniverse.com/forum/fb.asp?m=11023578

RE: xf5f Grumman Skyrocket
Here is another set of plans that I found reference to. "Flying Models Get a FREE issue of this brand new interactive RC magazine. Not a scanned print mag. Not boring! magazine had a construction article in 2005 for an 89" span XF5F-1 with a pair of 38cc engines. Go to their website and look in their r/c Link this word and every other one like it in our forum to YOUR Website! plan catalog, page 33, plan CD254." I have emailed Flying Models to find out info on the plans. As far as Nick Ziroli's plans go, I just got them yesterday and have not dwelled on them. I would like to know how to mount two electrics and their sizes. Also I would like to know how to mount two Nitro engines in his plans. If you make your own control horns for the rudders, Like would appreciate any info you experience with them. If you contact the company about the canopy, please let me know what they say. Best regards
Posted on: 2/19/2012 9:47 AM by Author "Bashfulbob" in the forum "Giant Scale Aircraft - General"
http://www.rcuniverse.com/forum/fb.asp?m=10965970

RE: xf5f Grumman Skyrocket
HI In another forum on the subject of the RC Grumman XF5F - 1 Skyrocket, they said you could order plans from Flying Molders, catalog number CF386. I contacted them as they do not have it listed in their list of plans but they had it full scale. There was a build published article, around 1975 if my memory serves me correctly. The plan is drawn by Nick Ziroli and the article was written by Nick Ziroli too. It is one sheet plan and was designed around using the Wankel engines. The WS is 58 inches, and the plan says it can be powered with 2 - .29/.40 cu. Inches. The plans says the cowls are fiberglass and the canopy can be ordered from ”Major Model & MFG. 29 Edgar Drive , Smithtown , NY., 1187. I have not checked this out. The plan is NOT dimensioned but does have a scale bar. The cost for the plan was $11, copy of the build article, $3, shipping was $8 in a tube mailer.
Posted on: 2/19/2012 8:49 AM by Author "Bashfulbob" in the forum "Giant Scale Aircraft - General"
http://www.rcuniverse.com/forum/fb.asp?m=10965878

RE: Quadra 75 or 65 leaking fuel out the carb
If your still looking for a manual for your engine, I found one that covers 30 - 100 at this link. http://www.dieselrc.com/download/aerrow_quadra.pdf Hope it helps
Posted on: 4/24/2011 8:26 PM by Author "Bashfulbob" in the forum "Quadra-Aerrow Engines"
http://www.rcuniverse.com/forum/fb.asp?m=10483124

Quadra Manual Download
Link to quadra 30 to 100 engine manual. http://www.dieselrc.com/download/aerrow_quadra.pdf
Posted on: 4/24/2011 8:20 PM by Author "Bashfulbob" in the forum "Quadra-Aerrow Engines"
http://www.rcuniverse.com/forum/fb.asp?m=10483114

RE: Manual Quadra 42
I found a place that you can download the Quadra engine manuals from 35 to 100. Here is the link. http://www.dieselrc.com/download/aerrow_quadra.pdf
Posted on: 4/24/2011 8:15 PM by Author "Bashfulbob" in the forum "Quadra-Aerrow Engines"
http://www.rcuniverse.com/forum/fb.asp?m=10483108

RE: Need Owner's Manual for Q42 or US41
I am looking for a manual for the Quadra Aerrow 42 engine. I have tried USQAERO.com to no avail. Thanks for your time and attention in this matter. You can email me at Bashfulbob@gmail.com.
Posted on: 4/24/2011 7:55 PM by Author "Bashfulbob" in the forum "Quadra-Aerrow Engines"
http://www.rcuniverse.com/forum/fb.asp?m=10483081

Manual Quadra 42
I am looking for a manual for the Quadra Aerrow 42 engine. If you know where one can be found please email me at Bashfulbob@gmail.com Thank you for your time and attention in this matter.
Posted on: 4/24/2011 7:39 PM by Author "Bashfulbob" in the forum "Quadra-Aerrow Engines"
http://www.rcuniverse.com/forum/fb.asp?m=10483064