RE: Help restoring original Nikko Lobo
I don't know the model# on the one you're looking for but here's a bunch more to look at. Seems to be a bunch of vehicles called lobo. I'm suprised there's this much parts support for a toy grade rc. http://www.searspartsdirect.com/partsdirect/getModelNew!retrieveModelDetails.pd?modelNumber=14007&brandId=0760&productCategoryId=1407100&seoFormattedBrandName=Nikko-Parts&seoFormattedProductTypeName=Toy-Parts
Posted on: 5/21/2013 9:13 AM by Author "Big Alice" in the forum "RC Car General Discussions"
http://www.rcuniverse.com/forum/fb.asp?m=11518250

RE: Help restoring original Nikko Lobo
I don't know if this will help or not. Worth looking at, anyway. http://parts.sears.com/partsdirect/part-model/nikko-parts/toy-parts/Model-14065/0760/1407100/00032466/00001
Posted on: 5/19/2013 4:25 PM by Author "Big Alice" in the forum "RC Car General Discussions"
http://www.rcuniverse.com/forum/fb.asp?m=11516423

RE: Blackfoot Parts?
e bay http://www.ebay.com/sch/i.html?_trksid=p5197.m570.l1311&_nkw=tamiya+blackfoot&_sacat=220
Posted on: 9/4/2012 8:55 AM by Author "Big Alice" in the forum "RC Classic Cars & Trucks"
http://www.rcuniverse.com/forum/fb.asp?m=11216953

RE: Tight motor
Heat it up with a heat gun to about 150-200 degrees fahrenheit. It'll turn over a lot easier.
Posted on: 8/13/2012 3:34 PM by Author "Big Alice" in the forum "RC Car General Discussions"
http://www.rcuniverse.com/forum/fb.asp?m=11192114

RE: xxx nt crank type
Manual http://rcdocuments.com/?page=1
Posted on: 7/20/2012 6:57 PM by Author "Big Alice" in the forum "RC Nitro Stadium Trucks"
http://www.rcuniverse.com/forum/fb.asp?m=11163058

RE: Official RC10GT Thread
[quote]ORIGINAL: SLAYERDUDE Any type of vintage RC10info you want should be at RC10talk.com http://www.rc10talk.com/ Pretty much anything old, those guys know their stuff. [/quote] That's the best place for info on rc10 based vehicles and other old cars that I've seen.
Posted on: 7/16/2012 5:08 PM by Author "Big Alice" in the forum "RC Nitro Stadium Trucks"
http://www.rcuniverse.com/forum/fb.asp?m=11157865

RE: Official RC10GT Thread
Look around in here. The gt manual is there. Right below it is a "setup guide". When I opened it, they call it a complete tuning guide. Might be what you're looking for. Worth a look. http://rcdocuments.com/?page=1
Posted on: 7/15/2012 9:59 PM by Author "Big Alice" in the forum "RC Nitro Stadium Trucks"
http://www.rcuniverse.com/forum/fb.asp?m=11156837

RE: Official RC10GT Thread
There's a bunch of gt tuning guides in here. 7190 is listed. http://www.teamassociated.com/manuals/RC10GT/
Posted on: 7/15/2012 5:55 PM by Author "Big Alice" in the forum "RC Nitro Stadium Trucks"
http://www.rcuniverse.com/forum/fb.asp?m=11156557

RE: How often do you lose body clips?
I bought a box of 100 years ago. Still using from the same box. And they are better quality and cheaper than a lot of the ones you find at the hobby shop. http://www.mcmaster.com/#hairpin-clips/=icz3ja
Posted on: 7/11/2012 8:00 AM by Author "Big Alice" in the forum "RC Car General Discussions"
http://www.rcuniverse.com/forum/fb.asp?m=11151289

RE: TC3 Team Associated carb adjustment
Need to know what 18 motor it is. As an example os 18 cvr. That way you can find the manual for that particular motor and get the factory settings. Then you have a starting point. Factory settings are different from motor to motor. Without the factory settings you're just guessing.
Posted on: 6/28/2012 11:38 AM by Author "Big Alice" in the forum "RC Car General Discussions"
http://www.rcuniverse.com/forum/fb.asp?m=11135280

RE: TC3 Team Associated carb adjustment
What motor is in the car?
Posted on: 6/26/2012 11:25 PM by Author "Big Alice" in the forum "RC Car General Discussions"
http://www.rcuniverse.com/forum/fb.asp?m=11133411

RE: Baja 5SC Exhaust Mount Screws
http://www.hpiracing.com/manuals/pdf/105734.pdf page 41.
Posted on: 5/15/2012 7:02 PM by Author "Big Alice" in the forum "RC Giant Scale Cars"
http://www.rcuniverse.com/forum/fb.asp?m=11082346

RE: repinch
If you heat it up to about 200 degrees f before you try to start it, it'll start a lot easier. Easier on the rod, too.
Posted on: 5/6/2012 4:49 PM by Author "Big Alice" in the forum "Car Nitro & Gas Engines"
http://www.rcuniverse.com/forum/fb.asp?m=11070714

RE: Body clips help
http://www3.towerhobbies.com/cgi-bin/wti0001p?&I=LX2932&P=7 Glue them to the bottom of the bed with shoe goo. I just make my own. I usually put them on before I run a body.
Posted on: 4/18/2012 10:14 PM by Author "Big Alice" in the forum "RC Car General Discussions"
http://www.rcuniverse.com/forum/fb.asp?m=11048092

RE: PLEASE HELP!!! WHAT IS THIS CAR?
The battery trays look like old RC10 stuff. Don't know about the chassis. Old pan car of some sort. Somebody will reconize it.
Posted on: 4/16/2012 2:31 PM by Author "Big Alice" in the forum "RC Classic Cars & Trucks"
http://www.rcuniverse.com/forum/fb.asp?m=11044592

RE: Kyosho Outlaw Rampage Nitro Help
http://rcdocuments.com/?page=1 You can get the manual in there. lsn is 1/2 turn in from flush. Hsn is 2 turns out. 2 turns is pretty rich.
Posted on: 4/2/2012 10:49 AM by Author "Big Alice" in the forum "RC Classic Cars & Trucks"
http://www.rcuniverse.com/forum/fb.asp?m=11025188

RE: Rc10 GT forum
This thread has a lot of info on the gt. Tons of reading. http://www.rcuniverse.com/forum/m_796271/mpage_1/key_/tm.htm
Posted on: 3/6/2012 8:54 AM by Author "Big Alice" in the forum "RC Nitro Stadium Trucks"
http://www.rcuniverse.com/forum/fb.asp?m=10988700

RE: help w/cvd rebuild! rc10gt
http://www.radioshack.com/product/index.jsp?productId=12515232 Heat shrink tubing. Keeps the pin in there even if the set screw comes loose. Keeps the dirt out and the grease in. All for three bucks. LOL
Posted on: 2/23/2012 6:07 PM by Author "Big Alice" in the forum "RC Car General Discussions"
http://www.rcuniverse.com/forum/fb.asp?m=10973008

RE: KYOSHO ?
Might get 40 50 bucks for it. Less if it didn't have the belt. The belt drive might sell it if someone's looking for a belt setup for their own optima. It's that car's best feature. The rest looks kinda rough. If you can find a kyosho forum you might find someone who'd buy it just for the belt drive. If mine was still chain drive, I'd buy it. "First generation Optima with belt conversion" I bet somebody'd buy that on a kyosho oriented forum.
Posted on: 1/23/2012 6:34 PM by Author "Big Alice" in the forum "RC Classic Cars & Trucks"
http://www.rcuniverse.com/forum/fb.asp?m=10924129

RE: KYOSHO ?
It's an optima chassis. javalin and salute used that chassis too. looks like it's been switched over to belt drive. The original chain was a pita. I've still got my turbo optima.
Posted on: 1/23/2012 2:26 PM by Author "Big Alice" in the forum "RC Classic Cars & Trucks"
http://www.rcuniverse.com/forum/fb.asp?m=10923723

RE: New Engine Installation: Day Three
If it's dry a little oil in the plug hole is good. I know some don't preheat their motors but it's important on a new motor. It releives a lot of the pinch tightness and is a lot less stressful to the rod. Makes for a happier motor. No broken rod either. Can you post a pic of the flywheel, clutch and small flywheel?
Posted on: 1/20/2012 5:29 PM by Author "Big Alice" in the forum "Car Nitro & Gas Engines"
http://www.rcuniverse.com/forum/fb.asp?m=10919211

RE: New Engine Installation: Day Two
I'd put some oil in the plug hole and use a heat gun. As hard as it is to turn over cold, you're probably going to have to heat it to start it.
Posted on: 1/16/2012 6:33 PM by Author "Big Alice" in the forum "Car Nitro & Gas Engines"
http://www.rcuniverse.com/forum/fb.asp?m=10912489

RE: Thought I would share...
Nice job on the rusted out spots. Very cool.
Posted on: 1/16/2012 9:22 AM by Author "Big Alice" in the forum "RC Car General Discussions"
http://www.rcuniverse.com/forum/fb.asp?m=10911598

RE: New Engine Installation: Day One
The flywheel nut probably has locktite on it.
Posted on: 1/14/2012 10:14 PM by Author "Big Alice" in the forum "Car Nitro & Gas Engines"
http://www.rcuniverse.com/forum/fb.asp?m=10909314

RE: rc10gt
The idle screw is the one with the spring. This clutch is a lot better than the stock gt clutch. No creep. http://www.ebay.com/itm/MIP-4-n-1-Clutch-RC10GT-MIP3012-/360420048411?pt=Radio_Control_Parts_Accessories&hash=item53eab57e1b
Posted on: 1/2/2012 5:26 PM by Author "Big Alice" in the forum "RC Nitro Stadium Trucks"
http://www.rcuniverse.com/forum/fb.asp?m=10888497

RE: Problem with Redcat Shockwave engine
Have you tried heating the motor up with a heat gun and/or loosening the glow plug before you try to start it? That will help if it's just tight. It's hard to diagnose a problem without any info. Kinda like, " my car won't start. How come?" Can you turn the motor over by turning the flywheel with the plug in?
Posted on: 12/30/2011 11:03 AM by Author "Big Alice" in the forum "Car Nitro & Gas Engines"
http://www.rcuniverse.com/forum/fb.asp?m=10883057

RE: Problem with Redcat Shockwave engine
Motor new?
Posted on: 12/29/2011 6:58 PM by Author "Big Alice" in the forum "Car Nitro & Gas Engines"
http://www.rcuniverse.com/forum/fb.asp?m=10882172

RE: Any tips for first start up?
Just my opinion, but I'd be heating that motor up with a heat gun before I started it at least till it's broken in. It's hard on a new motor to start it cold.
Posted on: 12/27/2011 8:48 PM by Author "Big Alice" in the forum "RC Car General Discussions"
http://www.rcuniverse.com/forum/fb.asp?m=10879035

RE: Carb stuck, idle speed stuck, what to do?
The end of the idle screw fits into a ramped slot in the moving part of the carb. It has to be in that slot.
Posted on: 12/24/2011 5:26 PM by Author "Big Alice" in the forum "RC Car General Discussions"
http://www.rcuniverse.com/forum/fb.asp?m=10875025

RE: *~ Official RC10GT2 Thread ~*
If it won't adjust enough you'll probably have to put on a little bigger spur gear. A few teeth on the spur gear won't kill the effect of the 24 clutch bell. Still gonna be a big change. Lots of motor for that truck.
Posted on: 12/10/2011 6:54 PM by Author "Big Alice" in the forum "RC Nitro Stadium Trucks"
http://www.rcuniverse.com/forum/fb.asp?m=10853615