RE: Hunt for micro jet for my Colibri and JC P-20 finally over
Hi Ali, you could also try www.velocity-rc.com They carry a BAe Hawk (my design) as well as a T-33 and a Mirage (composite kits). All designed for 70mm edf, but suited for this size turbine. Cheers, Al
Posted on: 10/26/2009 2:07 PM by Author "Mr. Boogie" in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=9203410

RE: Futaba 2PL 2.4Ghz........ why, why, why?
[quote] Hmmm, speaking of the tower hobbies radios, I know they are not compatible with fasst, but maybe they will work with the 2pl? the tower 2.4 receivers are fhss and only $22..... Most of tower hobbies electronics are made by futaba.... If they are compatible, that would make the system more tolerable in my eyes[:D] [/quote] This is the question I have for the 2pl. Has anyone tried this yet?
Posted on: 10/23/2009 2:57 PM by Author "Boogie_Man" in the forum "RC Car Radio Equipment"
http://www.rcuniverse.com/forum/fb.asp?m=9196383

RE: 34
Those were great little planes. I built several of Fred Reese's planes out of RCM back in the mid '80's. They could be whipped up in one evening. I like the Simple Cub the best. The wings would last forever but I must have built 3 or 4 fuses. It was a wicked little ball of fire. Flat spins were just a blur. I would love to find plans for the whole Simple series.
Posted on: 6/28/2009 1:06 PM by Author "Boogie_" in the forum ""1/2 A" & "1/8 A" airplanes"
http://www.rcuniverse.com/forum/fb.asp?m=8888235

RE: Who makes the 70% Raven and +60% Ultimate?
They were Weimo before. Now they are manufactured in Poland. Check them out here: www.airtrade.pl
Posted on: 6/7/2009 3:56 PM by Author "Boogie" in the forum "Giant Scale Aircraft - 3D & Aerobatic"
http://www.rcuniverse.com/forum/fb.asp?m=8833067

RE: NEUTRINO - NEW F3A PROJECT FROM GREECE
[quote]ORIGINAL: Magne I made this model a few years ago ( http://www.rcuniverse.com/forum/m_1157858/anchors_3879310/mpage_11/key_/anchor/tm.htm#3879310 post No. 274) [/quote] I have downloaded a photo of your model sometime ago and couldn't find anything on it later. It's probably the most beautiful pattern plane I have ever seen. Wish I could get my hands on one of those fuselages.
Posted on: 3/17/2009 9:43 AM by Author "Boogie" in the forum "Pattern Flying"
http://www.rcuniverse.com/forum/fb.asp?m=8586932

RE: WIN A FREE Scale Fuselage from V-East & Graupner Helis
I'm in too!
Posted on: 1/18/2009 6:02 AM by Author "Boogie" in the forum "RC Helicopter General Discussions"
http://www.rcuniverse.com/forum/fb.asp?m=8371226

RE: Airfoil for 40% large scale
Eppler E 169
Posted on: 7/8/2008 10:57 AM by Author "Boogie" in the forum "Giant Scale Aircraft - 3D & Aerobatic"
http://www.rcuniverse.com/forum/fb.asp?m=7706995

RE: Great Incidence Gadget
What about Angle Pro from Hangar9?
Posted on: 7/8/2008 10:41 AM by Author "Boogie" in the forum "Pattern Flying"
http://www.rcuniverse.com/forum/fb.asp?m=7706946

RE: Bomber Field Bomber Gathering & Big Bird Fly-In
This is an awesome event, can't wait!
Posted on: 8/23/2007 3:38 PM by Author "Boogie_Man" in the forum "Events, Shows and Fun Fly's - Airplanes"
http://www.rcuniverse.com/forum/fb.asp?m=6277541

RE: Alvin, Texas Big Bird Fun-Fly and Swap Meet
Not Sure... Due to the weather, I didn't go either.
Posted on: 4/9/2007 2:19 PM by Author "Boogie_Man" in the forum "Events, Shows and Fun Fly's - Airplanes"
http://www.rcuniverse.com/forum/fb.asp?m=5689065

Hoverfest Pro Bro @ Bomberfield, TX
Hoverfest Pro Bro on April 14th and 15th, 2007. Starts at 9:00 AM on Saturday and might go all night...Early arrivals on Friday are welcome. Free parking, $20.00 landing fee, concessions will be available. Overnite camping, no hookups. If you have a profile bird and an AMA card, come on out and have a blast! Check out Bomber Field at: [link]http://www.bomberfieldusa.com/dir.htm[/link] And the Pro Bros at: [link]http://www.theprofilebrotherhood.com[/link]
Posted on: 4/9/2007 2:18 PM by Author "Boogie_Man" in the forum "Events, Shows and Fun Fly's - Airplanes"
http://www.rcuniverse.com/forum/fb.asp?m=5689046

Alvin, Texas Big Bird Fun-Fly and Swap Meet
The Alvin Annual Big Bird Fun-Fly And Swap Meet Saturday, April 7, 2007 Alvin R/C Club Field Corner of CR 283 and CR 180 Alvin, TX. Directions: At Hwy. 6 and Business 35, go south on 35 to the second light. This is Sealy St. Turn right on Sealy St. Go 1.7 miles and turn right on Fairview, 4 way stop. Go 0.8 miles and turn left on CR 180. Go 1 mile and turn right into the field. Come Join Us for a full day of Fun and Flying! 40’ x 400’ Paved Runway 100’ x 800’ Grass Runway Overnight Camping OK, No Hook Ups Clean Restroom Concessions – Great Food! AMA RULES – AMA Membership Required Pilot Fee $10.00 Registration Begins at 8am. Flying from 9 am to 4 pm. Spectators and Swap Meet Free. Raffle – Futaba 7 Channel Computer Radio and other Prizes. For more info go to. [link]http://www.houstonrc.com/modules.php?name=Forums&file=viewtopic&t=1173[/link]
Posted on: 4/5/2007 7:43 PM by Author "Boogie_Man" in the forum "Events, Shows and Fun Fly's - Airplanes"
http://www.rcuniverse.com/forum/fb.asp?m=5671197

RE: Mustang PTS????
Your going to notice a big difference without that 3 blade prop. I was being lapped with it on and changed to a 10x7. It rocks. I soloed with it just a few weeks back. I love this plane.
Posted on: 4/4/2007 9:32 AM by Author "Boogie_Man" in the forum "Beginners"
http://www.rcuniverse.com/forum/fb.asp?m=5663475

RE: Houston Texas Swap Meet Feb 24 2007
Picked up some great deals last year. I'll be there again!
Posted on: 2/22/2007 10:04 AM by Author "Boogie_Man" in the forum "Events, Shows and Fun Fly's - Airplanes"
http://www.rcuniverse.com/forum/fb.asp?m=5457305

RE: My Scratch 50CC Yak 54 Build
So you say that 1/4 with carbon will be all right?? I had 3/8 square spruce in my Funtana I was building (stopped building it, because of the engine- the one I wanted to use wasn't good enough from what I've seen) and thought that it was OK. What would you propose to use for a hardcore 3D -->no full power blenders, but I will surely pull lots of walls with it :D. Would those 1/4 survive?? I doubt. I know that you have EF Yak. What did they use?
Posted on: 1/20/2007 3:54 PM by Author "Boogie" in the forum "Giant Scale Aircraft - 3D & Aerobatic"
http://www.rcuniverse.com/forum/fb.asp?m=5295652

RE: My Scratch 50CC Yak 54 Build
I have also started my own design 50cc yak. What did you use for the wingspars??
Posted on: 1/18/2007 3:43 PM by Author "Boogie" in the forum "Giant Scale Aircraft - 3D & Aerobatic"
http://www.rcuniverse.com/forum/fb.asp?m=5285446

RE: My first build.
Yeah! That's me who told him about it!! I had written to the owner of the shop to get the contact to those people, who make it, but I wasn't given it. He just didn't care about it. I am really confused as what to do now. Lately I have been involved with the build of my own Katana using these outlines and with a completely new construction and some changes. What I have completely copied were the outlines of the turtledeck. It's the same size as the Extreme Flight extra.
Posted on: 11/23/2006 11:48 AM by Author "Boogie" in the forum "Scratch Building, Aircraft Design, 3D/CAD"
http://www.rcuniverse.com/forum/fb.asp?m=5030483

RE: jet flying at floyld bennett field brooklyn
Hi, I was up at FBF (hailing from NJ) this Saturday and generally found the folks there to be receptive and friendly. In particular I would like to thank Mike and Vinny for helping me to get my mini-me JSF F35 checked out and maidened. You guys are awesome! Al aka Mr. Boogie
Posted on: 10/1/2006 4:12 PM by Author "Mr. Boogie" in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=4815069

RE: UltraFly P-51 with Flaps & Retracts
flights so far and the only issue has been the stock retracts. Boogie [quote]ORIGINAL: abjet oh i almost
Posted on: 8/10/2006 10:35 AM by Author "Mr. Boogie" in the forum "Foamies! - RC Electric Foam Aircraft"
http://www.rcuniverse.com/forum/fb.asp?m=4605696

RE: glow plug came out
Same here. Not to long ago as I was on a buddy cord, the engine just died. I used a friends glow igniter, the Kind you push and twist on. Well I just pushed and twisted off also. [8|] Fixed the problem and went to start it again and the prop just flew off. Totally new problem![:@]
Posted on: 8/1/2006 10:09 AM by Author "Boogie_Man" in the forum "Crash & Rebuild"
http://www.rcuniverse.com/forum/fb.asp?m=4570104

RE: UltraFly P-51 with Flaps & Retracts
. Mr. Boogie
Posted on: 7/29/2006 2:15 PM by Author "Mr. Boogie" in the forum "Foamies! - RC Electric Foam Aircraft"
http://www.rcuniverse.com/forum/fb.asp?m=4559028

RE: Project Extra in MA magazine???
http://www.modelaircraft.org/mag/hurley/hurleyindex.asp Maybe this might help..........
Posted on: 7/19/2006 4:33 PM by Author "Boogie" in the forum "Giant Scale Aircraft - 3D & Aerobatic"
http://www.rcuniverse.com/forum/fb.asp?m=4520783

RE: 14th Big Apple Jet Rally June 10-11 2006 whos coming
Additional shots.
Posted on: 6/13/2006 4:06 PM by Author "Mr. Boogie" in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=4386339

RE: 14th Big Apple Jet Rally June 10-11 2006 whos coming
This was also my first Jet Rally. It was a lot of fun and everyone truly seemed interested in all things that fly, as evidenced by the assortment of electric and gas DF jets. Definitely on my attend list for next year. Al
Posted on: 6/13/2006 4:04 PM by Author "Mr. Boogie" in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=4386333

RE: What is more important: Knowing the cause of a crash, or seeing the result?
There needs to be a "or both" button. I like the carnage, but as a rookie, I want to learn what NOT to do.
Posted on: 6/8/2006 5:40 PM by Author "Boogie_Man" in the forum "Crash & Rebuild"
http://www.rcuniverse.com/forum/fb.asp?m=4368845

RE: Just a small easy build CAD project.
It an Autocad .dwg file. I just downloaded it and opened it with Acad 2004.
Posted on: 6/8/2006 3:18 PM by Author "Boogie_Man" in the forum "Scratch Building, Aircraft Design, 3D/CAD"
http://www.rcuniverse.com/forum/fb.asp?m=4368372

RE: Exclusive-Modelbau the Funtana Pro
Didn't You read his last post?? He has written there that he DOESN'T have them anymore!!
Posted on: 5/30/2006 10:30 AM by Author "Boogie" in the forum "Scratch Building, Aircraft Design, 3D/CAD"
http://www.rcuniverse.com/forum/fb.asp?m=4331455

RE: 14th Big Apple Jet Rally June 10-11 2006
Hi Vinny, Is there an area for spectators? I'd like to come out and see the turbines in action. Thanks, Al
Posted on: 5/22/2006 1:34 PM by Author "Mr. Boogie" in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=4304988

RE: Yak-3 3 Views
Samolot mysliwskie is a fighter plane in polish.
Posted on: 5/17/2006 11:25 AM by Author "Boogie" in the forum "Scratch Building, Aircraft Design, 3D/CAD"
http://www.rcuniverse.com/forum/fb.asp?m=4287711

RE: New Funtana Pro !
I know it;s an old post, but can any of the owners tell me how thick are the balsa sides on this plane?
Posted on: 5/8/2006 12:34 PM by Author "Boogie" in the forum "3D Flying!"
http://www.rcuniverse.com/forum/fb.asp?m=4254016