|
DL engine has a mind of its own!
I am breaking in a DL 50 on the ground. Its gets good fuel flow, I have a 30:1 mix ratio, and the ignition battery is fully charged and yet the engine will only start sometimes. I have run about two liters though the engine and it is still hard to start. Has anyone else had this problem or does anyone have a solution? Any help would be greatly appreciated.
Posted on: 4/9/2010 7:35 PM by Author "Bretd123"
in the forum "Gas Engines"
http://www.rcuniverse.com/forum/fb.asp?m=9649622
DL 50 won't start
I have tried almost everything and my Dl 50 still will not start. It has no compression. It will fire every once and a while but the prop doesn't even make it all the way around. I don't know what to do anymore.
Posted on: 4/6/2010 6:14 PM by Author "Bretd123"
in the forum "Gas Engines"
http://www.rcuniverse.com/forum/fb.asp?m=9642239
RE: Lost G5 serial numbers:-(
I haven't registered the sim online yet.
Posted on: 3/29/2010 11:33 PM by Author "Bretd123"
in the forum "RC Flight Simulator Software"
http://www.rcuniverse.com/forum/fb.asp?m=9623022
Lost G5 serial numbers:-(
Hey ive lost my G5 serial numbers when i recently moved. Can anyone help me out with this??? Or is there any way to get these numbers without me having to go buy a new box? Thx!
Posted on: 3/29/2010 9:17 PM by Author "Bretd123"
in the forum "RC Flight Simulator Software"
http://www.rcuniverse.com/forum/fb.asp?m=9622587
lightening the hatch?
I am building an Aero-Works 50cc 260 and was wondering if it was ok to take out the back part of the hatch that leads to the inside of the canopy and to cut out some of the wood that is directly below the canopy? I wasn't sure if this would be a strength issue or not. http://www.aero-works.net/store/imag...50cc_red16.jpg
Posted on: 1/19/2009 10:59 PM by Author "Bretd123"
in the forum "Aero-Works Support"
http://www.rcuniverse.com/forum/fb.asp?m=8378393
Servo selection help?
I have the Aeroworks 50cc 260 and i need help on servo selection, i want to go all digital. I have one rudder servo the Hitec 7955TG but i need all others. I have been told to use JR821s all around except rudder but they are 88 oz/in and the manual recomends at least 180 oz/in.. I am very tight on money. can anyone help? I like to fly 3d so i asume that i will need a lot of torque.
Posted on: 1/12/2009 12:07 AM by Author "Bretd123"
in the forum "Giant Scale Aircraft - 3D & Aerobatic"
http://www.rcuniverse.com/forum/fb.asp?m=8348062
RE: Pulse 40 or Great Planes Escapade
The pulse for sure, I have had this plane for 2 years and it is still fun. It was my second plane and it will progress with you as you learn aerobatics. Go with the pnp version because it is sooooo easy to assemble[8D] GOOD LUCK[;)]
Posted on: 1/4/2009 1:12 AM by Author "Bretd123"
in the forum "Beginners"
http://www.rcuniverse.com/forum/fb.asp?m=8315941
RE: Possible new RC show on Discovery or History channel
[:D][size=7][/size]this is what i have been waiting for![size=7][/size][;)][:D][:)][8D] that would be awsome![;)]
Posted on: 1/4/2009 1:00 AM by Author "Bretd123"
in the forum "Beginners"
http://www.rcuniverse.com/forum/fb.asp?m=8315902
RE: Aero-Works Extra 260 50cc Quickbuild
I have one shipping now, i hope i have as much fun as you have had![;)]
Posted on: 1/1/2009 1:03 AM by Author "Bretd123"
in the forum "Giant Scale Aircraft - 3D & Aerobatic"
http://www.rcuniverse.com/forum/fb.asp?m=8304585
RE: lets see your homemade fueling stations!
[X(]is that a wagon?[:D][:)][;)][8D]
Posted on: 1/1/2009 12:54 AM by Author "Bretd123"
in the forum "Beginners"
http://www.rcuniverse.com/forum/fb.asp?m=8304568
RE: What a Gtreat Day!!
http://www3.towerhobbies.com/cgi-bin/wti0001p?&I=LXHZ15&P=ML
Posted on: 12/30/2008 5:14 PM by Author "Bretd123"
in the forum "Beginners"
http://www.rcuniverse.com/forum/fb.asp?m=8299581
lets see your homemade fueling stations!
I am tryng to build a new fuel station and need ideas on how to mount the hand crank pump, any ideas would be appriciated.[;)]
Posted on: 12/30/2008 4:59 PM by Author "Bretd123"
in the forum "Beginners"
http://www.rcuniverse.com/forum/fb.asp?m=8299526
RE: how do i make a Blade MCX more responsive?
it has the weird micro micro servos that are on all of the little parkzone planes. It is very nice even though everyone likes to complain about the batteries. i have flown mine about 20 times and havent had a battery or charger problem. It is a great indoor flyer, probably better than its bigger brother.
Posted on: 10/8/2008 7:32 PM by Author "Bretd123"
in the forum "RC Helicopter Beginners Forum"
http://www.rcuniverse.com/forum/fb.asp?m=8031353
how do i make a Blade MCX more responsive?
I need greater throw on my Blade MCX. Sorry for the stupid question but i am a plane guy[:)]
Posted on: 10/7/2008 12:20 AM by Author "Bretd123"
in the forum "RC Helicopter Beginners Forum"
http://www.rcuniverse.com/forum/fb.asp?m=8025580
Battery question
I have just bought a lanier 87" yak built by my friend, he had 2 hyrimax 6 cell batteries with 2 voltage regulators in it. the problem is that this requires 8 channels and i am on a dx7. What would be the best solution to this problem? I really dont want lipo because it is too complicated for me right now.
Posted on: 8/11/2008 1:25 AM by Author "Bretd123"
in the forum "Giant Scale Aircraft - 3D & Aerobatic"
http://www.rcuniverse.com/forum/fb.asp?m=7832087
RE: Almost lost my newer gas sportster due to radio interference?
how do you properly secure the RX batt. in the rear of the plane? I tried to do that last night but could not find a way to secure it. the rear of the fuse is a pretty tight space.
Posted on: 6/26/2008 3:15 AM by Author "Bretd123"
in the forum "ARF or RTF"
http://www.rcuniverse.com/forum/fb.asp?m=7662495
RE: Almost lost my newer gas sportster due to radio interference?
the RX is in front of the ignition battery so i cant do anything about it. If I switch the RX and batteries the CG will be way off. It already is
Posted on: 6/26/2008 1:00 AM by Author "Bretd123"
in the forum "ARF or RTF"
http://www.rcuniverse.com/forum/fb.asp?m=7662261
RE: Almost lost my newer gas sportster due to radio interference?
nope, no tightly pulled wires.
Posted on: 6/26/2008 12:04 AM by Author "Bretd123"
in the forum "ARF or RTF"
http://www.rcuniverse.com/forum/fb.asp?m=7662126
RE: Almost lost my newer gas sportster due to radio interference?
I have tried to notice a pattern, gboulton, but I cannot find anything, the pauses happen very randomly. Here is the pic[8|]
Posted on: 6/25/2008 11:10 PM by Author "Bretd123"
in the forum "ARF or RTF"
http://www.rcuniverse.com/forum/fb.asp?m=7661937
RE: Almost lost my newer gas sportster due to radio interference?
I do believe it is an earlier version of the reciever. I try to do everything that I can to keep from getting interference but this plane is so limited in space for this engine.
Posted on: 6/25/2008 3:40 AM by Author "Bretd123"
in the forum "ARF or RTF"
http://www.rcuniverse.com/forum/fb.asp?m=7658363
Almost lost my newer gas sportster due to radio interference?
I have flown my giant super sportster around 5 times. Each time I fly, for about 5 seconds, I have no control over my plane. I have a dx7 with a AR6200 reciever. Both batteries (ignition and radio) are quite close together, also they are very close to the reciever. I was told by multiple people here that batteries will not interfere with a 2.4ghz system. Could this be the problem? Have any of you had this problem?
Posted on: 6/25/2008 2:49 AM by Author "Bretd123"
in the forum "ARF or RTF"
http://www.rcuniverse.com/forum/fb.asp?m=7658303
RE: Back yard flyer
I have a slo v. DONT GET It. I would go with the cub. And to your question, yes, the slo v only comes with a cigarette lighter charger. My slo v is very sensitive to wind, it isnt durable at all and the motor isnt enough power for it.
Posted on: 6/23/2008 2:04 PM by Author "Bretd123"
in the forum "Beginners"
http://www.rcuniverse.com/forum/fb.asp?m=7651653
RE: Nexstar EP
yeah, what he said.[:)] Also, batteries for that plane are going to be big bucks
Posted on: 6/20/2008 5:06 PM by Author "Bretd123"
in the forum "Beginners"
http://www.rcuniverse.com/forum/fb.asp?m=7642087
how do you guys get avitars?
yep, basically. It always says file to large. And just to be sure, an avitar is the picture next to your name when you post isnt it?
Posted on: 6/18/2008 11:07 PM by Author "Bretd123"
in the forum "Questions and Answers"
http://www.rcuniverse.com/forum/fb.asp?m=7635849
RE: Muffler, canister, and tuned pipe, which is the best?
My objective is to find out which I should get for my next 50cc plane. I just wanted to know pros and cons excluding price. And, what is the difference between the three.
Posted on: 6/17/2008 4:57 PM by Author "Bretd123"
in the forum "Giant Scale Aircraft - 3D & Aerobatic"
http://www.rcuniverse.com/forum/fb.asp?m=7630128
Muffler, canister, and tuned pipe, which is the best?
What are the main differences between these three things? Which is the best?
Posted on: 6/17/2008 3:07 PM by Author "Bretd123"
in the forum "Giant Scale Aircraft - 3D & Aerobatic"
http://www.rcuniverse.com/forum/fb.asp?m=7629682
RE: nitrous oxide on a gas plane
THANK YOU martinarcher[8D]
Posted on: 6/12/2008 11:48 PM by Author "Bretd123"
in the forum "3D Flying!"
http://www.rcuniverse.com/forum/fb.asp?m=7613453
RE: A new day for Aeroworks
I fourth it![:D]
Posted on: 6/6/2008 4:41 PM by Author "Bretd123"
in the forum "Aero-Works Support"
http://www.rcuniverse.com/forum/fb.asp?m=7588460
RE: What's a good 'smaller' gasser?
use an evolution 35 or 26cc
Posted on: 6/6/2008 4:15 PM by Author "Bretd123"
in the forum "Giant Scale Aircraft - 3D & Aerobatic"
http://www.rcuniverse.com/forum/fb.asp?m=7588379
I want my plane to pull a banner/sign
I want to pull a banner from my giant super sportster because I just got a mutoh (a vinyl printer), and I need to know how to go about doing this, what type of material, how big does the material need to be? Do I Have to have one side weighted down? What do i do to get the banner to stay upright? If you have any pics, that would be nice[:D]. Thanks in advance[;)]
Posted on: 6/2/2008 5:12 PM by Author "Bretd123"
in the forum "Beginners"
http://www.rcuniverse.com/forum/fb.asp?m=7571729
| 
