E-Flite DHC-2 Beaver Anybody putting one together???
Starting to put it together. Went with the 32 BL Outrunner motor because it is going on floats. I am having a terrible time trying to set the four screws into place that holds the cowling in place. Doing it with the replica radial engine is beyond me. If anyone out there has gone through this all help or advice will be more than appreciated. Stu
Posted on: 4/11/2009 10:49 PM by Author "Bungi" in the forum "ARF or RTF"
http://www.rcuniverse.com/forum/fb.asp?m=8672250

DCH-2 Beaver
Just ordered the DCH-2 Beaver 25a made by e-flite from my local hobby retailer. Would appreciate any help or advice that would help me on the build. Anybody out there put this plane together and if so how do you like it???? I started out with heli's, got a super cub for beginners, then a cesna 206 and last a trojen 28. Now I have gone loco and ordered the Beaver with floats. This RC bug does not let you go. Stu
Posted on: 4/6/2009 1:54 AM by Author "Bungi" in the forum "ARF or RTF"
http://www.rcuniverse.com/forum/fb.asp?m=8653121

RE: escape woes
Thanks Hans This heli is a trex clone. It is a Flasher 450 super 3D. Bought it to take when I went south. Flew great untill I had a minor mishap. Took out a few items plus a servo which I replaced. Would not spool up at all. Got a new ESC under warranty and replaced. Spooled up fine except motor is too hot. Got a new motor under warrenty but have not replaced it yet. If the motor gear is binding on the main gear how do I make it a little less tight???? I have a blade 400 and I bought a trex 600n plus all the trimmings from my local hobby shop owner. Only have started it up as I am a bit chicken to fly it for now. I do appreciate your taking time to answer my questions. Regards Stu
Posted on: 3/3/2009 1:08 AM by Author "Bungi" in the forum "Walkera Helis - Dragonfly, etc.."
http://www.rcuniverse.com/forum/fb.asp?m=8538164

escape woes
Could some one please advise me on which wire on my escape goes to what color wire on my motor???? Escape would not work so I replaced it. Now it works but the motor is running too hot. Will replace motor but I want to make sure I have the escape wired correctly. If I have the escape in front of me face up and the motor wires pointing away from me while the battery and reciever wires are pointing at me what wire goes to what color on the motor. I have it thus.... left escape wire to red middle escape wire to black right escape wire to yellow. Evrything works as it should but the motor is running way too hot. Is it possible that I have the motor too tight and that it is binding with the main gear. If so how do I loosen the motor to eliminate this. Thanks for any help. Stu
Posted on: 3/1/2009 10:29 PM by Author "Bungi" in the forum "Walkera Helis - Dragonfly, etc.."
http://www.rcuniverse.com/forum/fb.asp?m=8533859

mcx any problems with wire connection to battery
give me a reply. Bungi
Posted on: 10/24/2008 1:46 AM by Author "Bungi" in the forum "E-Flite Helicopters"
http://www.rcuniverse.com/forum/fb.asp?m=8079755

RE: Cannot pull glow plug extension off
Thanks for getting back to me Skarn. I finally got it off but what a pain. Think I will do what you did. Bungi
Posted on: 10/24/2008 1:38 AM by Author "Bungi" in the forum "T-Rex heli"
http://www.rcuniverse.com/forum/fb.asp?m=8079743

Cannot pull glow plug extension off
Having trouble pulling the glow plug extension wire off of my glow plug. Can I force it. The clip pulls down okay but I cannot pull the boot off. Thanks for any reply Bungi Trex600N Blade 400 Blade CX2 Blade MCX (gotta love it)
Posted on: 10/14/2008 1:41 AM by Author "Bungi" in the forum "T-Rex heli"
http://www.rcuniverse.com/forum/fb.asp?m=8047157

RE: NEW! E-Flite Blade Micro CX
Andrew it is not compatible with the DX6. It is compatable with the DX6i Bungi
Posted on: 10/8/2008 1:05 AM by Author "Bungi" in the forum "E-Flite Helicopters"
http://www.rcuniverse.com/forum/fb.asp?m=8029109

RE: Problems resetting my Spectrum DX6i
Thanks..The bible will be a great help. I figured it out. Somehow I had set it for one servo instead of three. Now it is working. Thanks again. Bungi
Posted on: 10/8/2008 1:02 AM by Author "Bungi" in the forum "RC Helicopter Beginners Forum"
http://www.rcuniverse.com/forum/fb.asp?m=8029106

RE: swasplate set up on blade 400
Thanks Jeff I will let you know how I make out Bungi (Stu)
Posted on: 10/7/2008 2:40 AM by Author "Bungi" in the forum "E-Flite Helicopters"
http://www.rcuniverse.com/forum/fb.asp?m=8025821

Problems resetting my Spectrum DX6i
will that solve this problem. Everything else is working as normal. Help Bungi
Posted on: 10/7/2008 2:37 AM by Author "Bungi" in the forum "RC Helicopter Beginners Forum"
http://www.rcuniverse.com/forum/fb.asp?m=8025814

Swashplate woes blade 400
It's me again. Does anyone think that if I rebind my unit that it will solve the problem I previously posted. Bungi
Posted on: 10/7/2008 2:24 AM by Author "Bungi" in the forum "E-Flite Helicopters"
http://www.rcuniverse.com/forum/fb.asp?m=8025804

RE: NEW! E-Flite Blade Micro CX
Got one and it is great. For a heli that weighs one ounce you will not believe how functional and responsive it is. It recharges in about 10 minutes. Picked it up in B.C. Canada for $109.00. Bound it to my spectrum and away it goes. Have fun Bungi
Posted on: 10/7/2008 12:47 AM by Author "Bungi" in the forum "E-Flite Helicopters"
http://www.rcuniverse.com/forum/fb.asp?m=8025640

need help swasplate blade 400
here is a pic of the Trex. If any one wants a bit of fun pick up the mcx my dog could probably fly it Thanks again Bungi
Posted on: 10/7/2008 12:42 AM by Author "Bungi" in the forum "E-Flite Helicopters"
http://www.rcuniverse.com/forum/fb.asp?m=8025625

swasplate set up on blade 400
. Anyway hope someone can set me straight on my problem. Thanks. Bungi
Posted on: 10/7/2008 12:37 AM by Author "Bungi" in the forum "E-Flite Helicopters"
http://www.rcuniverse.com/forum/fb.asp?m=8025617

RE: Would you buy a crashed heli?
Sorry to see the results of ground rash. If you are going to sell it as is or part it out I am interested. Bungi
Posted on: 10/5/2008 2:09 AM by Author "Bungi" in the forum "T-Rex heli"
http://www.rcuniverse.com/forum/fb.asp?m=8019767

RE: Would you buy a crashed heli?
Sorry to see the results of ground rash. If you are going to sell it as is or part it out I am interested. Bungi
Posted on: 10/5/2008 2:08 AM by Author "Bungi" in the forum "T-Rex heli"
http://www.rcuniverse.com/forum/fb.asp?m=8019765

RE: How do i replace the main shaft on my Blade 400 3D?????
Thanks to all. Am up and running. Bungi
Posted on: 4/6/2008 3:52 AM by Author "Bungi" in the forum "RC Helicopter Beginners Forum"
http://www.rcuniverse.com/forum/fb.asp?m=7340007

RE: How do i replace the main shaft on my Blade 400 3D?????
I'm on it....Many thanks Bungi
Posted on: 4/5/2008 11:43 AM by Author "Bungi" in the forum "RC Helicopter Beginners Forum"
http://www.rcuniverse.com/forum/fb.asp?m=7336546

Need help replacing main shaft on Blade 400 3D
Crashed again Must be an easy way to replace main shaft on the Blade 400. Any advice to this rookie would be greatly appreciated. Bungi
Posted on: 4/5/2008 1:24 AM by Author "Bungi" in the forum "RC Helicopter Heaven Support"
http://www.rcuniverse.com/forum/fb.asp?m=7335506

RE: Blade 4003D
Your quick response was gratly appreciated. take care Bungi
Posted on: 4/5/2008 1:02 AM by Author "Bungi" in the forum "E-Flite Helicopters"
http://www.rcuniverse.com/forum/fb.asp?m=7335456

How do i replace the main shaft on my Blade 400 3D?????
Fourth flight then it hurt. Bent the main shaft and I am hopeing that there is a way to replace it without tearing the whole heli apart. As a newbie I would appreciate all the help I can get. Bungi
Posted on: 4/5/2008 12:51 AM by Author "Bungi" in the forum "RC Helicopter Beginners Forum"
http://www.rcuniverse.com/forum/fb.asp?m=7335426

Blade 4003D
Rookie mistake 4th Flight OUCH Need to replace my main shaft. Any help or advice would be more than appreciated. There has to be a simple way to do it without taking the whole heli apart. Bungi
Posted on: 4/5/2008 12:27 AM by Author "Bungi" in the forum "E-Flite Helicopters"
http://www.rcuniverse.com/forum/fb.asp?m=7335353