os 18tm clutch nut
anyone know of a.clutch.nut that will fit an os 18tm, that has the slot to fit clutch spring in. i have a few but the thread on the crankshaft is too big. tired.of the stock revo spring going.bad.
Posted on: 9/2/2012 6:09 PM by Author "CUHRYTDUH" in the forum "Car Nitro & Gas Engines"
http://www.rcuniverse.com/forum/fb.asp?m=11215020

os 18tm help
Anyone know where I can get a clutch nut for an OS 18tm , that has a slot to fit clutch springs in? Tired of the stock revo setup. I have some but the thread on the crankshaft is too big. Thanks
Posted on: 9/2/2012 2:50 PM by Author "CUHRYTDUH" in the forum "Traxxas Monster Truck forum"
http://www.rcuniverse.com/forum/fb.asp?m=11214797

RE: The Official Traxxas Slash short-course race truck
thanks for the tips, but i need more advice now. I went to run it and something broke. The pinion and spur spin with throttle but the tires dont move. I assumed it was the diff so i took it apart and dont see any visisble damage, but i noticed the output shaft that goes through part number2388x will spin freely inside part 2388x. I put 2 and 2 together and figured something inside it is broke. I got a feeling it has 50 gears and washers and bearings inside it so i would rather just replace it. Should it spin freely? thanks for looking
Posted on: 5/2/2012 6:03 PM by Author "CUHRYTDUH" in the forum "RC Electric Off-Road Trucks, Buggies, Truggies and more"
http://www.rcuniverse.com/forum/fb.asp?m=11066073

RE: The Official Traxxas Slash short-course race truck
oh yeah, i have the castle sv2 3800kv brushless setup in it.
Posted on: 4/30/2012 2:53 PM by Author "CUHRYTDUH" in the forum "RC Electric Off-Road Trucks, Buggies, Truggies and more"
http://www.rcuniverse.com/forum/fb.asp?m=11063008

RE: The Official Traxxas Slash short-course race truck
hey guys, i am new to the slash forum and had a question. i see all these videos on youtube about slash 2wd's with 3s lipos and they are wheelie monsters. so i got a sky lipo 3300mah 20c 3s to put in mine. this thing flies....but no wheelies and mucho tire spin. i assume i dont need to have the slipper nut tightened all the way, or do i? it is about half a turn from close now. any suggestions on getting wheelies? thanks for looking
Posted on: 4/30/2012 2:49 PM by Author "CUHRYTDUH" in the forum "RC Electric Off-Road Trucks, Buggies, Truggies and more"
http://www.rcuniverse.com/forum/fb.asp?m=11063005

RE: revo F4.6
nice! i also used the traxxas bb mount for my picco despite the bad reviews. dont understand what people dont get about these mounts. I had no problems.
Posted on: 4/30/2012 1:14 PM by Author "CUHRYTDUH" in the forum "Traxxas Monster Truck forum"
http://www.rcuniverse.com/forum/fb.asp?m=11062887

RE: Go Blue T-Maxx 3.3
holy freakin crap, nice. go blue!
Posted on: 4/17/2012 6:19 PM by Author "CUHRYTDUH" in the forum "Traxxas Monster Truck forum"
http://www.rcuniverse.com/forum/fb.asp?m=11046441

RE: New to nitro
I would think the exhaust is the way it should be, they are different from 2 stroke. And it really doesnt matter where you put the after run oil, either way its gonna get to the engine parts.
Posted on: 3/23/2012 8:29 AM by Author "CUHRYTDUH" in the forum "Traxxas Monster Truck forum"
http://www.rcuniverse.com/forum/fb.asp?m=11011858

RE: 4wd prob on ntc3
nevermind, took the diff case off and found the bigger gear and bearings were shattered.
Posted on: 2/27/2012 2:32 PM by Author "CUHRYTDUH" in the forum "RC On Road Nitro Cars"
http://www.rcuniverse.com/forum/fb.asp?m=10978762

4wd prob on ntc3
I have two ntc3's, one has single speed and ae .12, the other is two speed with os 18tm. i noticed that the one with the os 18, when it is running and i give it throttle, the two front wheels spin fast but the back wheels just kinda "coast" slowly. also I noticed on the one with the ae .12, all four wheels spin fast when throttle applied. Any ideas? thanks
Posted on: 2/27/2012 1:51 PM by Author "CUHRYTDUH" in the forum "RC On Road Nitro Cars"
http://www.rcuniverse.com/forum/fb.asp?m=10978703

RE: connecting rod removal
thank you sir
Posted on: 1/26/2012 12:01 PM by Author "CUHRYTDUH" in the forum "Car Nitro & Gas Engines"
http://www.rcuniverse.com/forum/fb.asp?m=10929058

connecting rod removal
Does anybody have a link or vid on how to remove the connecting rod from the piston. I'm lost here.....thx (os .18 tz)
Posted on: 1/25/2012 5:39 PM by Author "CUHRYTDUH" in the forum "Car Nitro & Gas Engines"
http://www.rcuniverse.com/forum/fb.asp?m=10927807

RE: Revo 2.5 glow plug issues
i had same prob and it was the gas tank lid o-ring. check it to make sure it is still tube shaped and not flattened or torn
Posted on: 12/21/2011 12:43 PM by Author "CUHRYTDUH" in the forum "Traxxas Monster Truck forum"
http://www.rcuniverse.com/forum/fb.asp?m=10870194

RE: 2.4ghz rx/ tx question
I cant find just the xp3 ss radio, only see the combo. any suggestions?
Posted on: 12/17/2011 6:15 AM by Author "CUHRYTDUH" in the forum "Traxxas Monster Truck forum"
http://www.rcuniverse.com/forum/fb.asp?m=10863416

RE: 2.4ghz rx/ tx question
alright thanks. guess its goin on ebay then.
Posted on: 12/17/2011 6:11 AM by Author "CUHRYTDUH" in the forum "Traxxas Monster Truck forum"
http://www.rcuniverse.com/forum/fb.asp?m=10863413

2.4ghz rx/ tx question
Can you use any combo for a 2.4ghz rx tx setup? I have associated receiver and want to use with another brand 2.4ghz transmitter. Is this possible?
Posted on: 12/16/2011 5:39 PM by Author "CUHRYTDUH" in the forum "Traxxas Monster Truck forum"
http://www.rcuniverse.com/forum/fb.asp?m=10862988

RE: TMaxx Took Off on me
sounds like lost reception. check all batteries, and check throttle return spring to see if it's still hooked on.
Posted on: 10/1/2011 7:10 PM by Author "CUHRYTDUH" in the forum "Traxxas Monster Truck forum"
http://www.rcuniverse.com/forum/fb.asp?m=10744259

RE: 3 shoe conversion for revo picco
where can i find one. and is it complete with flywheel?
Posted on: 9/30/2011 3:54 AM by Author "CUHRYTDUH" in the forum "Traxxas Monster Truck forum"
http://www.rcuniverse.com/forum/fb.asp?m=10741642

RE: 3 shoe conversion for revo picco
10-4. i guess i could get one of the integy and if anything at least the flywheel should be good. If needed i can replace shoes and springs with another manufacturer. thx guys
Posted on: 9/26/2011 3:30 PM by Author "CUHRYTDUH" in the forum "Traxxas Monster Truck forum"
http://www.rcuniverse.com/forum/fb.asp?m=10735313

3 shoe conversion for revo picco
I've been tearing up the stock clutch sets for my revo picco .26max about every half gallon. Any suggestions on 3 shoe conversion? All i see is Integy, but I here Integy is crap.
Posted on: 9/25/2011 9:52 AM by Author "CUHRYTDUH" in the forum "Traxxas Monster Truck forum"
http://www.rcuniverse.com/forum/fb.asp?m=10733250

RE: IS A .26 RED DOT WORTH IT
ahhh yeah
Posted on: 9/14/2011 4:27 PM by Author "CUHRYTDUH" in the forum "Traxxas Monster Truck forum"
http://www.rcuniverse.com/forum/fb.asp?m=10716867

RE: IS A .26 RED DOT WORTH IT
I've had picco .26max for 3 gallons with stock everything. Not one spur, tranny, or driveshaft problem. Just depends on how its setup.
Posted on: 9/14/2011 2:05 PM by Author "CUHRYTDUH" in the forum "Traxxas Monster Truck forum"
http://www.rcuniverse.com/forum/fb.asp?m=10716682

RE: The Official Traxxas Slash short-course race truck
I've tried everything. Nothing happenin, I'll call traxxas tomorrow. Thanks alot. Any suggestions on new lipo friendly esc?
Posted on: 8/28/2011 2:49 PM by Author "CUHRYTDUH" in the forum "RC Electric Off-Road Trucks, Buggies, Truggies and more"
http://www.rcuniverse.com/forum/fb.asp?m=10690863

RE: The Official Traxxas Slash short-course race truck
I actually have a cheap 27mhz rx/tx. I didnt switch modes, i followed the vxl-3s programing instructions. It says to hold button until green and then red, let go and when it blinks once, hold the throttle, blinks twice, hold the reverse and its set. Well.... when i let go it turns back green and doesnt allow me to hold throttle or reverse. The truck doesnt move at all, nor the steering.
Posted on: 8/27/2011 7:03 PM by Author "CUHRYTDUH" in the forum "RC Electric Off-Road Trucks, Buggies, Truggies and more"
http://www.rcuniverse.com/forum/fb.asp?m=10689887

RE: The Official Traxxas Slash short-course race truck
Hey guys have a problem need some help. I was running my slash 4x4 yesterday and doin some big jumps, until the last jump. It had rolled a few times after it landed and was on its top. I turned it over and no response from steering or throttle. The light was red, so i turned it off and back on, it was then green. I've tried resetting transmitter to esc to no avail. I hold the button until green, then red and i release. The light blinks red once and immediately goes green. It doesnt allow me to hold throttle and then hold reverse as stated in instructions. Any suggestions? It is a vxl-3s (unfortuneately). Thanks for looking
Posted on: 8/27/2011 3:20 PM by Author "CUHRYTDUH" in the forum "RC Electric Off-Road Trucks, Buggies, Truggies and more"
http://www.rcuniverse.com/forum/fb.asp?m=10689673

RE: roto start for picco
yes very true, if not at least make sure engine is warmed up prior to starting.
Posted on: 7/7/2011 6:04 PM by Author "CUHRYTDUH" in the forum "HPI Monster Truck Forum"
http://www.rcuniverse.com/forum/fb.asp?m=10610897

RE: Wont start
how long are u priming? how long do you use the ez start in one try? try heating the engine with blow dryer first, that helps start much faster. Only prime long enough to see the fuel go into the carb, and run the wand for just a few seconds at a time. Check the plug to see if it has alot of fuel on it, if it does then pinch the line and use starter until it fires, then release line.
Posted on: 7/7/2011 12:17 PM by Author "CUHRYTDUH" in the forum "Traxxas Monster Truck forum"
http://www.rcuniverse.com/forum/fb.asp?m=10610398

RE: trx 3.3 burning up glowplugs
I had the SAME prob a while back, so i took my revo to my LHS and they fixed it right there. It was the o-ring on the gas tank lid. If it is at all damaged it will burn plugs every time u run. If he let it idle upside down the temps were perfect, but as soon as he flipped it on its wheel and gave it throttle it burnt the plug. If i start burning plugs that is the first thing i check. hope that helps
Posted on: 7/1/2011 1:58 PM by Author "CUHRYTDUH" in the forum "Traxxas Monster Truck forum"
http://www.rcuniverse.com/forum/fb.asp?m=10601745

RE: steering servo trouble
turns out the servo wasnt bad. I had to change the dust boots on the driveshafts, and when i reinstalled I tightened the pivot ball caps too tight causing the wheels to "stick" left or right. I loosened them a little and the problem was gone:)
Posted on: 6/26/2011 2:58 PM by Author "CUHRYTDUH" in the forum "Traxxas Monster Truck forum"
http://www.rcuniverse.com/forum/fb.asp?m=10593259

RE: Flux - ATV guy is back!
that is neat. nice vid
Posted on: 6/21/2011 2:55 PM by Author "CUHRYTDUH" in the forum "RC Car Videos"
http://www.rcuniverse.com/forum/fb.asp?m=10585539