|
RE: 3DBatix foamy Extra 330 ROX!!
Thanks Mate!! Ummm weight, i belive it was 13oz's. been ages since i've flown it! i think if u build it a little bit smaller it will be perfect for the 370. i printd the plans out on tiled A4 sheets but i've started doing the full size prints and it is well worth the money to get them printed full size!! so much less fuss.
Posted on: 6/16/2007 12:59 AM by Author "Chris-B-chips"
in the forum "3D Electric Flying!"
http://www.rcuniverse.com/forum/fb.asp?m=5993833
RE: HELP NEEDED ASAP!! AFPD CRASHING MY SYSTEM!!
continualy crashing without an explanation and i just want to fly! Thanks for your help guys, Chris B.
Posted on: 12/2/2006 1:23 AM by Author "Chris-B-chips"
in the forum "Ikarus AeroFly Pro and Aerofly Pro Deluxe"
http://www.rcuniverse.com/forum/fb.asp?m=5064919
RE: HELP NEEDED ASAP!! AFPD CRASHING MY SYSTEM!!
I have thermal probes on each of my components and everything is running at nominal temperatures. CPU (Intel Core 2 Duo 2.13ghz processor) was running at 36.1 degrees celcius (no higher than usual) Video card (Gigabyte GeForce 7600GT with 256mb of DDR3 graphics ram, Freon cooling system) was wunning at 42 degrees celcius, it has been hotter without a problem. Thanks for your help!
Posted on: 11/19/2006 12:49 AM by Author "Chris-B-chips"
in the forum "Ikarus AeroFly Pro and Aerofly Pro Deluxe"
http://www.rcuniverse.com/forum/fb.asp?m=5013317
HELP NEEDED ASAP!! AFPD CRASHING MY SYSTEM!!
Hey guys, I need some help, quickly!! I'm a long time AFP user but i've recently upgraded to AFPD. Its an awesome sim, but after using it for around 45 minutes, it crashes my machine! My entire computer just shuts down for no reason! The more is use the sim, the more often this happens. I have all the latest patches for AFPD, as well as the add on. I also have all the latest drivers for my motherboard and Video card installed. Could someone please help, i am very worried about the health of my PC.
Posted on: 11/18/2006 9:30 PM by Author "Chris-B-chips"
in the forum "Ikarus AeroFly Pro and Aerofly Pro Deluxe"
http://www.rcuniverse.com/forum/fb.asp?m=5012679
RE: green drillable fibre reinforced plastic?
well, from what you've described that sounds like G10. I don't know much about it except that it is similar to the stuff they use in PC board?? it can also be used to make control horns (that is, only if it is the stuff i'm think it Chris B.
Posted on: 3/19/2006 2:25 AM by Author "Chris-B-chips"
in the forum "Composites Fabrication And Repair"
http://www.rcuniverse.com/forum/fb.asp?m=4052515
RE: Comp ARF Extra 260 Build Time . . .
Excellent!!!!!! I've been waiting to see a build thread for the 260!!![:D] Can't wait for the pics!
Posted on: 2/10/2006 1:57 AM by Author "Chris-B-chips"
in the forum "Giant Scale Aircraft - 3D & Aerobatic"
http://www.rcuniverse.com/forum/fb.asp?m=3892117
RE: post some pictures of your pattern plane!!
well Im going to post some pictures of latest addition probably this weekend once i spray the clear onto it [;)] So far it looks good!
Posted on: 2/9/2006 3:59 AM by Author "Chris-B-chips"
in the forum "Pattern Flying"
http://www.rcuniverse.com/forum/fb.asp?m=3888269
RE: Whats Up???????
away because of other projects). keep an eye out for the build thread[;)][8D] Chris B.
Posted on: 2/3/2006 12:52 AM by Author "Chris-B-chips"
in the forum "OMP - Ohio Model Products Support Forum"
http://www.rcuniverse.com/forum/fb.asp?m=3862040
RE: Whats Up???????
will do [8D]
Posted on: 2/1/2006 12:43 AM by Author "Chris-B-chips"
in the forum "OMP - Ohio Model Products Support Forum"
http://www.rcuniverse.com/forum/fb.asp?m=3852751
RE: Fusion or Edge???
Thanks Mike, I am definately expecting it to take longer to arrive here since i'm over seas but i was expecting notification of the shipment status. but as long as the order was recieved thats fine.[8D] Chris B.
Posted on: 1/31/2006 12:47 AM by Author "Chris-B-chips"
in the forum "OMP - Ohio Model Products Support Forum"
http://www.rcuniverse.com/forum/fb.asp?m=3848139
RE: Whats Up???????
Ok, thats great!!!! Sorry if i came across as a little pushy or rude it was just that i had expected a bit more notification, but it seems like everything is ok. Thanks again and i look forward to building it, Chris B.
Posted on: 1/31/2006 12:43 AM by Author "Chris-B-chips"
in the forum "OMP - Ohio Model Products Support Forum"
http://www.rcuniverse.com/forum/fb.asp?m=3848126
Whats Up???????
quality will make up for it. Where is the service???? hope i can get an answer soon, Chris B.
Posted on: 1/29/2006 2:26 AM by Author "Chris-B-chips"
in the forum "OMP - Ohio Model Products Support Forum"
http://www.rcuniverse.com/forum/fb.asp?m=3838664
RE: Fusion or Edge???
but no notification after that?? wat sort of notification can i expect?? Look forward to building it!!!! Chris B.
Posted on: 1/27/2006 3:36 AM by Author "Chris-B-chips"
in the forum "OMP - Ohio Model Products Support Forum"
http://www.rcuniverse.com/forum/fb.asp?m=3830772
RE: OMP Fusion .46 Trim Contest
Any news on the winners?? even if i dont win i'll probably by one any way[:D][8D]
Posted on: 1/13/2006 5:55 PM by Author "Chris-B-chips"
in the forum "OMP - Ohio Model Products Support Forum"
http://www.rcuniverse.com/forum/fb.asp?m=3770764
RE: Fusion or Edge???
I would love to get the 90 size but unfortunatley i dont have a motor for it or the money to buy one. i have just enough money for the forty size and plus i already have all the gear to go in it.[8D] look out for my order in the next few days![;)]
Posted on: 1/11/2006 4:00 AM by Author "Chris-B-chips"
in the forum "OMP - Ohio Model Products Support Forum"
http://www.rcuniverse.com/forum/fb.asp?m=3759904
RE: Fusion or Edge???
I fly alot of pattern and IMAC so i think the fusion will suit me perfectly!!! any news on the kits?
Posted on: 1/9/2006 6:00 PM by Author "Chris-B-chips"
in the forum "OMP - Ohio Model Products Support Forum"
http://www.rcuniverse.com/forum/fb.asp?m=3753388
RE: Fusion or Edge???
Awsome!!! cant wait for the kits to come out![:D]
Posted on: 1/8/2006 11:40 PM by Author "Chris-B-chips"
in the forum "OMP - Ohio Model Products Support Forum"
http://www.rcuniverse.com/forum/fb.asp?m=3750489
RE: Fusion or Edge???
Thanks Dale, The fusion sounds alot more like my style so i'll wait until the kit comes out. Chris B.
Posted on: 1/8/2006 6:10 PM by Author "Chris-B-chips"
in the forum "OMP - Ohio Model Products Support Forum"
http://www.rcuniverse.com/forum/fb.asp?m=3748667
RE: OMP Fusion .46 Trim Contest
and here are a couple of screenshots of the red version hope you like it!:
Posted on: 1/8/2006 12:27 AM by Author "Chris-B-chips"
in the forum "OMP - Ohio Model Products Support Forum"
http://www.rcuniverse.com/forum/fb.asp?m=3745835
Fusion or Edge???
be be able to help so thanks in advanced, Chris B.
Posted on: 1/7/2006 11:14 PM by Author "Chris-B-chips"
in the forum "OMP - Ohio Model Products Support Forum"
http://www.rcuniverse.com/forum/fb.asp?m=3745560
RE: OMP Fusion .46 Trim Contest
Here we go, hope I'm not to late!!!!!!!![:D][:D][X(][8|]
Posted on: 1/7/2006 6:07 AM by Author "Chris-B-chips"
in the forum "OMP - Ohio Model Products Support Forum"
http://www.rcuniverse.com/forum/fb.asp?m=3742572
RE: post some pictures of your pattern plane!!
I dont know about flht99b but i use an APC 17x12 narrow blade. it stops the motor from bogging up in the verticals so it is always producing the same amount of thrust. if your looking for dowline braking go the 17x12 normal blade. the only issue i find is that it really loads up in the verticals, especialy after a vertical snap.
Posted on: 12/21/2005 8:07 PM by Author "Chris-B-chips"
in the forum "Pattern Flying"
http://www.rcuniverse.com/forum/fb.asp?m=3679007
RE: 3DBatix foamy Extra 330 ROX!!
I get my depron from a friend, but i believe Ian Howard of DA (Desert Aircraft) Australia can get some in but dont quote me on that[;)][:D] Iknow what you mean by not cheap i've paid up to $13 for a sheet of 6mm depron. but i suppose its better than paying $150 for those wooden plans that can't be repared after a ding[:D].
Posted on: 12/18/2005 2:30 AM by Author "Chris-B-chips"
in the forum "3D Electric Flying!"
http://www.rcuniverse.com/forum/fb.asp?m=3665817
RE: 3DBatix foamy Extra 330 ROX!!
[quote]ORIGINAL: wvl Hi, I've made a 3Dbatix diablo, extra, and a foame2x. All planes fly great, only the 2x is much harder to fly when CG is set back. It'll knife edge without rudder assistance (I mean: it won't turn on ailerons only). Something I have to say though: the Axi 2212/34 is an excellent motor, but next time I'll have a 2208/34 to power the plane. It's a littlebit lighter, and has more than enough power. In general, the Batixplanes are a tad heavy, 6mm foam and the big axi make quite a load at the end. I plan on building a new extra, with all the weight saving I can get. The axi2212 lets the planes hover at half throttle, this means the planes are really overpowered. Getting the wing load down will allow for a lighter motor, and will have a positive affect on slow flight properties. I will probably also integrate airbrakes to increase airflow over the control surfaces. (slow flight with forced air (from the prop) passing over the controls gives much better reactivity). I also like nice painting or decals on a plane, but they increase the weight more than you think. I love my 3Dbatix planes! greetz. [/quote] Like i said, i dont get much of a chance to fly indoors so i dont mind my models being a bit heavier wing lodaing, i've tried the lighter way but i only ever got to fly it once evry two months[&o] because we get a fair bit of wind wihich would throw the plane around like a leaf! Sounds like an interesting idea you have there with the airbrakes!!!!! give it a try and let us all no how it goes!!!!!
Posted on: 12/17/2005 5:14 PM by Author "Chris-B-chips"
in the forum "3D Electric Flying!"
http://www.rcuniverse.com/forum/fb.asp?m=3664380
RE: 3DBatix foamy Extra 330 ROX!!
bdavison, I rarely get a chance to fly indoors and its normaly pretty windy at my field so i wanted something that could handle the wind but still fly light for those calm days and the rare indoor flights. Staudacher, I can assure you this will be the greatest foamy you've ever flown!!!!!! i've been through a lot of foamies including own designs when i couldn't find foamies that flew like i wanted and none of them come close to this!!!
Posted on: 12/17/2005 1:01 AM by Author "Chris-B-chips"
in the forum "3D Electric Flying!"
http://www.rcuniverse.com/forum/fb.asp?m=3662647
RE: 3DBatix foamy Extra 330 ROX!!
Hey mountaindr3wz Yeah thats me, i'm 14 [X(] and i've been flying for 4 years. great to see that i'm not the only younger pilot out there! Thanks for the kind comments, BTW, It flew today, and boy did it fly!!!! easily the best foamy i've ever flown so i'll cut another one out just for backup! unfortunatly no vid, the elevator pull-pull cable snapped before the second flight so no vid[:o] but i'll deffinately get some next time i take it out.
Posted on: 12/16/2005 10:54 PM by Author "Chris-B-chips"
in the forum "3D Electric Flying!"
http://www.rcuniverse.com/forum/fb.asp?m=3662323
3DBatix foamy Extra 330 ROX!!
Hey guys and gals, I've almost finished my 3DBatix extra and i have to say im impressed! this plane just "looks right". im guessing its going to fly insane! I would normaly design my own foamy but this design just about had evrything i was looking for so why go through all the effort of drawing up plans. i made a few mods to get it to my likings ( bigger COUNTERBALANCED ailerons , slightly bigger elevator and bigger rudder). this was my first attempt at airbrushing so dont scrutinize it to much! Power setup is as follows: -HS-55's all round (i'm yet to find a better servo!) -Trusty old AXI 2212/34 -rclithiumpower.com 3s 830mah battery -JR R700 reciver ( yea its a bit heavy but i dont have the money for a micro rec) I've found this to be the ultimate setup with my foamies. i've attached some photos of the plane and a mug shot of plane and pilot I'll get some video this weekend when i fly it. So who else has had experiences with this foamy?????
Posted on: 12/15/2005 1:49 AM by Author "Chris-B-chips"
in the forum "3D Electric Flying!"
http://www.rcuniverse.com/forum/fb.asp?m=3655981
RE: Wildberry tuscon dvd
Very proffesional and impressive! there are some exccelent displays of flying on there! all in all its just plane aweseome![:D]
Posted on: 12/12/2005 1:39 AM by Author "Chris-B-chips"
in the forum "3D Flying!"
http://www.rcuniverse.com/forum/fb.asp?m=3644333
RE: The demise of my Funtana 90 ***w/video***
the link still doesn't seem to be working???[:@][:@] and im dieing to see it!!!!!!!!!!!![:'(][&:][:@][:D]
Posted on: 12/4/2005 11:34 PM by Author "Chris-B-chips"
in the forum "3D Flying!"
http://www.rcuniverse.com/forum/fb.asp?m=3618935
RE: Composite ARF Wing Ding
Its a composite-arf guys!![&:] the entire model is made of a fibreglass/foam/fibreglass laminate. [:D][:)]
Posted on: 11/21/2005 1:34 AM by Author "Chris-B-chips"
in the forum "Composites Fabrication And Repair"
http://www.rcuniverse.com/forum/fb.asp?m=3572576
| 
