RE: RE:
Hello wittmanm 30 cc would fly this the 310 with authority, I have 25cc Converted Homelite Bandits on mine. I am redesigning the Mufflers now to inprove the exhaust exit. I have a little too much back pressure which limits the RPM's once that is done she will fly a lot better. Don't have any 30cc motors a couple of quadra 42's in other planes , but there are a couple at our field and they run great. Fuel wise I have my tanks right behind the motors mounted sideways and they are 18oz each more then enough Fuel with reserve for a 10 to 15 minute Flight. Keep us informed of your progress. Cliff
Posted on: 7/16/2012 5:37 PM by Author "Clavin01" in the forum "Twin & Multi Engine RC Aircraft"
http://www.rcuniverse.com/forum/fb.asp?m=11157903

RE: RE:
Has anyone in the Nosen Club ever tried to get a flying meet together? Just wondering.
Posted on: 6/23/2012 7:21 PM by Author "Clavin01" in the forum "Twin & Multi Engine RC Aircraft"
http://www.rcuniverse.com/forum/fb.asp?m=11129274

RE: RE:
Amish Actually it was very Hot and humid, So motors were not pulling full rpm's I had to pull it up to avoid the tree line, but looking at the video I had more room then I though. I might up the motor to G38"s for more power. This weigh's in at 32Lbs Fuel tanks are foward of the CG right behind the motors. And yes the Cg is close a tad nose down when balanced. Cliff
Posted on: 6/23/2012 7:19 PM by Author "Clavin01" in the forum "Twin & Multi Engine RC Aircraft"
http://www.rcuniverse.com/forum/fb.asp?m=11129272

RE: RE:
Wow, I guess everyone is busy Flying and not building. Well here it is, The Video, Sorry it is not better but had a newbe working the camera But it is good enought to give some guys encouragement to get to work on there projects. (thisStrangeengine) LOL. http://www.youtube.com/watch?v=hzbg6FtjruE not sure how to post here on RCU. Enjoy. Cliff[:D]
Posted on: 6/23/2012 3:53 PM by Author "Clavin01" in the forum "Twin & Multi Engine RC Aircraft"
http://www.rcuniverse.com/forum/fb.asp?m=11129068

RE: RE:
Well it finally happened, I maidened the 310 tonight. We have our annual Open House this Sat and any demo flights, the Plane must have flown previous. So out I went tonight What a sight and Sound it was fantastic. Required 2 clicks of up trim nothing else. What a relief it is done. I know it has taken a while since I posted it was ready, but had some family matters to deal with and had been stressed out. So doing a maiden was not a good idea at the time. Sorry did not get video on this one, but will have some on Sat. and will post it. Anyway the one thing it needs is retracts. Next on the priority List. Thanks to all for the Help here on the Nosen 310 Club. Cliff
Posted on: 6/6/2012 4:26 PM by Author "Clavin01" in the forum "Twin & Multi Engine RC Aircraft"
http://www.rcuniverse.com/forum/fb.asp?m=11109244

RE: RE:
Hey Flyboy I believe you might be looking at some of my Pics, about the 3/8 Alum Tubes, If your wing is not built yet do the mod and use a larger tube for the joints. Mine are about 3/8 tubes with Solid steel in the centers to stiffen them up. However they do flex a little bit when moving on Grass my field is all grass with a runway and taxi ways cut down to 1" and the rest is 2" if I put retracts in it I will use a larger tube and socket with alignment dowels front and rear. as far as attaching the outer wing panels the Plans show 2 screws throught the tube under the nacelle. I modded mine to a single bolt between the tubes with a solid hardwood block in the outer panel and tapped for the bolt, to tighten the bolt I have a hatch on the nacelle that i can open to get to the bolt. Hope this shed some light on the subject for you. If you have any questions Let me know. Thanks Cliff
Posted on: 5/14/2012 12:33 PM by Author "Clavin01" in the forum "Twin & Multi Engine RC Aircraft"
http://www.rcuniverse.com/forum/fb.asp?m=11080467

RE: RE:
Please do I have been considering them myself. and if you read the reviews you will find out the nose gear is 105 degree and the mains are 85 I believe. That may have been a fluke, But hopefully they are as stated. Cliff
Posted on: 5/9/2012 12:53 PM by Author "Clavin01" in the forum "Twin & Multi Engine RC Aircraft"
http://www.rcuniverse.com/forum/fb.asp?m=11074684

RE: RE:
Hello All I have the one with Retracts and Flaps, Yes it it a foamy but she Fly's like it is on rails Takeoffs and landing are straight foward, I have 3 Flights on it now. Have done Rolls still getting the feel for her. Runs on a single 3 Cell 2200 Lipo, It took less then a hour to assemble. I fly from a grass Field and it is off in 20 feet. Have not really needed Flaps for landing, But will try them and let everyone Know. I like the statement made earlier It is a Nosen 310 Training Aid. If my Nosen Fly's and handles anything like this I will be a Happy camper. Cliff
Posted on: 4/29/2012 5:00 PM by Author "Clavin01" in the forum "Twin & Multi Engine RC Aircraft"
http://www.rcuniverse.com/forum/fb.asp?m=11061686

RE: RE:
Hello All Well I have not maidened my Nosen 310 yet, However I did maiden my Dynam Grand Cruiser ( 310 copy) It flew very nice, posted on you tube and added a link. Cliff http://www.youtube.com/watch?v=lsFpXi1q1AE
Posted on: 4/28/2012 3:52 PM by Author "Clavin01" in the forum "Twin & Multi Engine RC Aircraft"
http://www.rcuniverse.com/forum/fb.asp?m=11060292

RE: RE:
Hey Bill You might like this . It's a Great Planes 29% Christen Eagle II with a Quad 42 Gasser. Fly's Great, There is a video on you tube http://www.youtube.com/watch?v=5eIHs0DV-Y4&feature=relmfu You will like it on Gas , Cliff
Posted on: 4/26/2012 1:50 PM by Author "Clavin01" in the forum "Twin & Multi Engine RC Aircraft"
http://www.rcuniverse.com/forum/fb.asp?m=11057965

RE: RE:
I agree with BPS it has been way to quiet here. Keep checking but no one has been updating. I my self am still waiting for my maiden, Seems like everytime I go out I find some small problem and have to put it off. 1st was a problem with servos, getting a lot of jitters, turned out to be a bad flap servo. then went out, almost ready to fly and realized the steering was backwards , had a 8 channel PCM rx but the 8th channel was a y connector with Bat. For some reason my radio would not show the 8th channel, Them switched to a G3 14 channel rx that would not link at the field. Brought it home and linked it up. Then while checking everything I realized the flap servos were different speeds, Install a new matched set and now it is ready. But weather has not been nice. decent during the week and windy and rain on the weekends, Last weekend Sat was decent but we were doing field maintence. Makes me wonder?????? Maybe this weekend. Sat chance of rain but Sunday is forcast as sunny. We'll see. Cliff
Posted on: 4/26/2012 1:05 PM by Author "Clavin01" in the forum "Twin & Multi Engine RC Aircraft"
http://www.rcuniverse.com/forum/fb.asp?m=11057886

RE: RE:
Terry Looking Good. Keep us up to date on progress. Did you put formers in Fuse? Cliff
Posted on: 3/31/2012 5:43 PM by Author "Clavin01" in the forum "Twin & Multi Engine RC Aircraft"
http://www.rcuniverse.com/forum/fb.asp?m=11022897

RE: RE:
Hello All Sorry no maiden today, Very overcast But I did run both motors , The sound of two in sync is great!!! Also had issue with Rx. very jittery. Going to change Rx and try again. But I did take some Pics at the field and she looks sweet. Cliff
Posted on: 3/31/2012 10:04 AM by Author "Clavin01" in the forum "Twin & Multi Engine RC Aircraft"
http://www.rcuniverse.com/forum/fb.asp?m=11022440

RE: RE:
Yes There will be Video taken when she fly's. I am amazed how light the Fuse is, I have not weighed it yet but will and post those numbers. Will keep everyone informed. Cliff
Posted on: 3/26/2012 2:30 AM by Author "Clavin01" in the forum "Twin & Multi Engine RC Aircraft"
http://www.rcuniverse.com/forum/fb.asp?m=11015222

RE: RE:
Hey Terry I have the file if you send me an e-Mail I will send it to you. Will try to add it here too. Sorry I though you were asking about the Firewall email me Cliff01@msn dot com Cliff
Posted on: 3/25/2012 4:33 PM by Author "Clavin01" in the forum "Twin & Multi Engine RC Aircraft"
http://www.rcuniverse.com/forum/fb.asp?m=11013095

RE: RE:
Hello All Well she is ready for Maiden. See Pics will try to take it to the field next weekend to do final Set-up and cg . Test run the motors Etc. Depending on the weather and wind as to maiden or not. Thanks to all for the Help, and Bill thanks for starting this Forum. It has been a big Help. Cliff
Posted on: 3/25/2012 2:56 PM by Author "Clavin01" in the forum "Twin & Multi Engine RC Aircraft"
http://www.rcuniverse.com/forum/fb.asp?m=11014594

RE: RE:
Amish Never said I was in my right Mind! There is always a First for everything.
Posted on: 3/24/2012 3:30 AM by Author "Clavin01" in the forum "Twin & Multi Engine RC Aircraft"
http://www.rcuniverse.com/forum/fb.asp?m=11012740

RE: RE:
That will do it. Thank You. I have Cg now and the throws, Only thing left is a piece of Clear monocoat for the top window and she is ready, All servos are in, Flap, Throttle and kill switches are already set just need to do the Ele, Rudder and Ailerons. Which is easy. As soon as I get it assembled I will take some Photos and Post. Cliff
Posted on: 3/23/2012 6:10 PM by Author "Clavin01" in the forum "Twin & Multi Engine RC Aircraft"
http://www.rcuniverse.com/forum/fb.asp?m=11012446

RE: RE:
Hello All Next Step, Does anyone Know the recommended control Throws for the 310? She is almost ready for Maiden. Cliff
Posted on: 3/23/2012 4:15 PM by Author "Clavin01" in the forum "Twin & Multi Engine RC Aircraft"
http://www.rcuniverse.com/forum/fb.asp?m=11012326

RE: RE:
Thanks Guys. I will start with 5 5/8" Cliff
Posted on: 3/21/2012 1:33 PM by Author "Clavin01" in the forum "Twin & Multi Engine RC Aircraft"
http://www.rcuniverse.com/forum/fb.asp?m=11009792

RE: RE:
Hello Thisstrangeengine Hey can you do me a favor, since you have full size Plans. What is the measurement for CG I came up with 5 and 1/4 inchs back from Leading edge. Is this correct. Let me know. Thanks Cliff
Posted on: 3/20/2012 4:34 PM by Author "Clavin01" in the forum "Twin & Multi Engine RC Aircraft"
http://www.rcuniverse.com/forum/fb.asp?m=11008798

RE: RE:
Hello All Guess it is time for an update. Just finished up the wings, Motors are mounted, Wired with both on -off switches and kill switches. Servos are installed in Ailerons, Flaps, Throttles and kill switches all are programed into the Radio with throws set-up and Flaps Slowed down. only thing left is to mount the props and spinners and landing gear. So now I can move this off the work spot and start on the Fuselage. Only minor stuff to do there, fix 1 spot on nose, new top window and fix the Door. Install the front gear and on-off switch going to try mounting it inside the cabin so fuse is clean. As soon as it is ready I will have Pics posted. Cliff Maiden next month.
Posted on: 3/17/2012 5:36 PM by Author "Clavin01" in the forum "Twin & Multi Engine RC Aircraft"
http://www.rcuniverse.com/forum/fb.asp?m=11004569

RE: RE:
Allen I know what you mean. But whatever you ask I think you will get it. Fully built and decked out like that and Flown Good Luck when you post it. Cliff
Posted on: 3/12/2012 3:56 PM by Author "Clavin01" in the forum "Twin & Multi Engine RC Aircraft"
http://www.rcuniverse.com/forum/fb.asp?m=10997508

RE: RE:
OK Will stop any rumors that might start. Have you posted the 310 yet? Just curious what she will sell for? Cliff
Posted on: 3/12/2012 2:56 PM by Author "Clavin01" in the forum "Twin & Multi Engine RC Aircraft"
http://www.rcuniverse.com/forum/fb.asp?m=10997421

RE: RE:
Allen You are a true Gentlemen. Cliff
Posted on: 3/12/2012 2:13 PM by Author "Clavin01" in the forum "Twin & Multi Engine RC Aircraft"
http://www.rcuniverse.com/forum/fb.asp?m=10997363

RE: RE:
Handyman You are just full of Ideas!!!!! By the way Very nice looking 310
Posted on: 3/12/2012 12:45 PM by Author "Clavin01" in the forum "Twin & Multi Engine RC Aircraft"
http://www.rcuniverse.com/forum/fb.asp?m=10997257

RE: RE:
Sorry I missed you. I was there today as well. Picked up a few things I needed for the 310 Have the fuel tanks and fuel dots for it and Fuel tubing. Also picked up a Triton EQ2 charger and some other stuff. I looked at the Royal 310 it was a older model and a little rought nothing a little work could not fix. A lot of decent models there This year.
Posted on: 3/10/2012 4:38 PM by Author "Clavin01" in the forum "Twin & Multi Engine RC Aircraft"
http://www.rcuniverse.com/forum/fb.asp?m=10994631

RE: RE:
That's Funny [:)][:)]
Posted on: 3/9/2012 2:24 PM by Author "Clavin01" in the forum "Twin & Multi Engine RC Aircraft"
http://www.rcuniverse.com/forum/fb.asp?m=10993325

RE: RE:
Hello All. Well I am makeing progress , most of the wing is done, it is now a 3 section wing, Most of the electronics are installed, both motors are mounted just need to get fuel tanks to finish up that area, set up engine kills then do the Fuse should be ready for April possibly sooner. going to Lebanon tomorrow hope to get the Fuel tanks there and fuel dots and a few other misc items. Hope to meet up with thisstrangeengine there as well.
Posted on: 3/9/2012 2:04 PM by Author "Clavin01" in the forum "Twin & Multi Engine RC Aircraft"
http://www.rcuniverse.com/forum/fb.asp?m=10993303

RE: RE:
hey bps The nosen 310 has sold already. [:o]
Posted on: 3/8/2012 2:28 AM by Author "Clavin01" in the forum "Twin & Multi Engine RC Aircraft"
http://www.rcuniverse.com/forum/fb.asp?m=10991058