RE: Walkera #4 Fixed Pitch Helicopter Forum
nice skids !!! Where can i get a set of these?
Posted on: 12/15/2005 1:55 PM by Author "Crashnet2000" in the forum "Walkera Helis - Dragonfly, etc.."
http://www.rcuniverse.com/forum/fb.asp?m=3657240

Shopping in Shanghai ??
Anyone that knows some great adresses of any rc helicopter shops in Shanghai? Or any markets or shoppingmalls that i can get some helicopter stuff in ?
Posted on: 10/24/2005 6:29 AM by Author "Crashnet2000" in the forum "Electric RC Helis"
http://www.rcuniverse.com/forum/fb.asp?m=3484456

RE: Walkera Dragonfly #4 4in1 question
it never stops flashing.. it flashes all the time, slowly and some times faster... What does this mean ?
Posted on: 10/12/2005 3:56 PM by Author "Crashnet2000" in the forum "Electric RC Helis"
http://www.rcuniverse.com/forum/fb.asp?m=3448760

RE: Walkera Dragonfly #4 4in1 question
fligt mode ? So i need to wait until it stops flashing before i lift off?
Posted on: 10/12/2005 10:12 AM by Author "Crashnet2000" in the forum "Electric RC Helis"
http://www.rcuniverse.com/forum/fb.asp?m=3447810

Walkera Dragonfly #4 4in1 question
Hi, does anyone know what the red led light means on the 4in1 ? It keeps on flashing and sometimes it is solid red. Does anyone know exactly what it tryes to say with the flashing and what it means when it is solid red ? Thanks
Posted on: 10/12/2005 9:33 AM by Author "Crashnet2000" in the forum "Electric RC Helis"
http://www.rcuniverse.com/forum/fb.asp?m=3447699

RE: Walkera #4 Fixed Pitch Helicopter Forum
does anyone know if the tailboom needs to be horizontal ? mine tilts forward...
Posted on: 10/9/2005 12:45 PM by Author "Crashnet2000" in the forum "Walkera Helis - Dragonfly, etc.."
http://www.rcuniverse.com/forum/fb.asp?m=3437935

RE: Walkera #4 Fixed Pitch Helicopter Forum
yeah but now that little devil tryes to tip over on me and rotates to the left even if i balance everything and set up the transmitter... This started after all the mods i done to it... Is it punishing me ??? I want to kick the living thing out of it right now !!!
Posted on: 10/5/2005 4:16 PM by Author "Crashnet2000" in the forum "Walkera Helis - Dragonfly, etc.."
http://www.rcuniverse.com/forum/fb.asp?m=3425397

RE: Walkera #4 Fixed Pitch Helicopter Forum
the switch is on, and it is behaving as you described.... i do not remeber it was like that when i got it ;) Now to the biggest problem. The damn thing starts to tip to the right on lift off and spins to the left. I have tryed to setup the transmitter but no luck yet... Need some help on this.
Posted on: 10/5/2005 8:14 AM by Author "Crashnet2000" in the forum "Walkera Helis - Dragonfly, etc.."
http://www.rcuniverse.com/forum/fb.asp?m=3424128

RE: Walkera #4 Fixed Pitch Helicopter Forum
like this ? [image]http://www.rcuniverse.com/gallery/galleryimages/lg-27666.jpg[/image]
Posted on: 10/5/2005 4:55 AM by Author "Crashnet2000" in the forum "Walkera Helis - Dragonfly, etc.."
http://www.rcuniverse.com/forum/fb.asp?m=3423910

RE: Walkera #4 Fixed Pitch Helicopter Forum
ahhh ok then it is connected correctly but why does not the tail motor spin to the right when i turn the stick to the right? it only work when turning to the left. [quote]ORIGINAL: chench OK the lead from the servo behind the main shaft goes in the bottom socket the lead from the servo next to the motor shaft goes in the top socket [/quote]
Posted on: 10/4/2005 4:16 PM by Author "Crashnet2000" in the forum "Walkera Helis - Dragonfly, etc.."
http://www.rcuniverse.com/forum/fb.asp?m=3421758

RE: Walkera #4 Fixed Pitch Helicopter Forum
lets do like this. the servo infront of the tailbom goes ? and the servo next to that servo goes ?
Posted on: 10/4/2005 4:05 PM by Author "Crashnet2000" in the forum "Walkera Helis - Dragonfly, etc.."
http://www.rcuniverse.com/forum/fb.asp?m=3421705

Dragonfly #4 help needed ASAP
hi i need HELP big time ! i connected the new 4in1 today and the tailrotor does not want to spin when i turn to right but only to left ??? Why is that ? Can some one provide a pic or some info on what needs to go to what on the 4in1 ? It seems the servos can be connected to both connectors but wich is the correct one ?
Posted on: 10/4/2005 3:54 PM by Author "Crashnet2000" in the forum "Electric RC Helis"
http://www.rcuniverse.com/forum/fb.asp?m=3421665

RE: Walkera #4 Fixed Pitch Helicopter Forum
hi i need HELP big time ! i connected the new 4in1 today and the tailrotor does not want to spin when i turn to right but only to left ??? Why is that ? Can some one provide a pic or some info on what needs to go to what on the 4in1 ? It seems the servos can be connected to both connectors but wich is the correct one ?
Posted on: 10/4/2005 3:15 PM by Author "Crashnet2000" in the forum "Walkera Helis - Dragonfly, etc.."
http://www.rcuniverse.com/forum/fb.asp?m=3421551

RE: Walkera #4 Fixed Pitch Helicopter Forum
My works. Make sure you choose Zhen Hua 5 in PPJOYCOM and do not turn the program off. Now when you have choosen the Zhen hua 5 start up FMS and under controlls choose viritual joystick.
Posted on: 10/4/2005 3:00 AM by Author "Crashnet2000" in the forum "Walkera Helis - Dragonfly, etc.."
http://www.rcuniverse.com/forum/fb.asp?m=3420168

RE: Walkera #4 Fixed Pitch Helicopter Forum
those are really light ;) i will cut down the bolts and drill more holes to the alu.. But do you think it is to heavy ?
Posted on: 10/3/2005 2:14 PM by Author "Crashnet2000" in the forum "Walkera Helis - Dragonfly, etc.."
http://www.rcuniverse.com/forum/fb.asp?m=3417914

RE: Walkera #4 Fixed Pitch Helicopter Forum
Try here http://www.rcuniverse.com/gallery/galleryCat.cfm?memID=202318 [quote]ORIGINAL: xelltronics crashnet, I'd like to see bigger pics but they won't work. Modifications look interesting... [/quote]
Posted on: 10/3/2005 1:34 PM by Author "Crashnet2000" in the forum "Walkera Helis - Dragonfly, etc.."
http://www.rcuniverse.com/forum/fb.asp?m=3417801

RE: Walkera #4 Fixed Pitch Helicopter Forum
Here is my baby so far... i still dont know if she will fly any good. I did all these mods during my wait for the new rotor head and a new 4in1 that burned out because the foulty battery. What do you think so far ? And do you think she will fly better then the original setup ;) [image]http://www.rcuniverse.com/gallery/galleryimages/thumb-27380.jpg[/image][image]http://www.rcuniverse.com/gallery/galleryimages/thumb-27381.jpg[/image][image]http://www.rcuniverse.com/gallery/galleryimages/thumb-27382.jpg[/image][image]http://www.rcuniverse.com/gallery/galleryimages/thumb-27383.jpg[/image][image]http://www.rcuniverse.com/gallery/galleryimages/thumb-27384.jpg[/image][image]http://www.rcuniverse.com/gallery/galleryimages/thumb-27385.jpg[/image][image]http://www.rcuniverse.com/gallery/galleryimages/thumb-27386.jpg[/image][image]http://www.rcuniverse.com/gallery/galleryimages/thumb-27387.jpg[/image][image]http://www.rcuniverse.com/gallery/galleryimages/thumb-27388.jpg[/image] Click on my Gallery to view some bigger pictures ;) http://www.rcuniverse.com/gallery/galleryCat.cfm?memID=202318
Posted on: 10/3/2005 1:34 PM by Author "Crashnet2000" in the forum "Walkera Helis - Dragonfly, etc.."
http://www.rcuniverse.com/forum/fb.asp?m=3417759

RE: Walkera #4 Fixed Pitch Helicopter Forum
does anyone know it the tailboom is 6mm or 8 mm ? if it is 6 mm is there a possibility to change it to a thicker ? Can i change my carbon to a aluminium bar ? Do you think it will effect the perfomance or lift on the helicopter ?
Posted on: 9/27/2005 12:36 PM by Author "Crashnet2000" in the forum "Walkera Helis - Dragonfly, etc.."
http://www.rcuniverse.com/forum/fb.asp?m=3398815

RE: Walkera #4 Fixed Pitch Helicopter Forum
yeah, that is the seller i recommended in tha last post so techicly i found it for you [:D]
Posted on: 9/27/2005 4:15 AM by Author "Crashnet2000" in the forum "Walkera Helis - Dragonfly, etc.."
http://www.rcuniverse.com/forum/fb.asp?m=3397869

RE: Walkera DragonFly v2 4ch shaking
Any pictures on how this was done ? [quote]ORIGINAL: Fugitive_Bill VIRBRATION / SHAKING THE SOLUTION for a STANDARD #4 DRILL right through the head that holds the blades on, with a 2.5mm drill. Then insert a METAL nut and bolt (keep the plastic hex 'nut', in-betwwen) and tighten down VERY tight. Flatten the blades slightly for more rotor speed. Ensure the blades are JUST front of centre horizonal plane. (A WHACK of power will throw them true) ATTEMPT to Gently Drop back down (It's very easy to panic and KILL the power -Good by skids) Trim all your controls. (Hover/slide around) Now when you feel feel it's trimmed, JUST JUMP UP. Once out of ground effect you'll be surprised how easy it is. However, I must stress use of the simulator is required to understand the effects of the controls. BILL. [/quote]
Posted on: 9/26/2005 8:40 AM by Author "Crashnet2000" in the forum "Walkera Helis - Dragonfly, etc.."
http://www.rcuniverse.com/forum/fb.asp?m=3394368

RE: Walkera #4 Fixed Pitch Helicopter Forum
Buy it from this seller instead... http://cgi.ebay.co.uk/New-Dragonfly-4-4CH-R-C-Electric-Helicopter_W0QQitemZ6001076412QQcategoryZ2563QQssPageNameZWDVWQQrdZ1QQcmdZViewItem Good price and very good seller ;) [quote]ORIGINAL: tomcatguy74 Hi all, I have been thinking about getting one of these walkera #4s. Is this the heli that the forum is about? http://cgi.ebay.com/NEW-DRAGONFLY-RADIO-CONTROLLED-HELICOPTER-V4-6-BONUS_W0QQitemZ5999996051QQcategoryZ2563QQrdZ1QQcmdZViewItem What can you tell me about this heli? Is this the heli that has the "next generation stock servos that won't go bad like was said earlier in the forum? This is coming from Canada, so is it possible they will have better customer service? I had a Rotofly once and only kept it for a few days. I broke it a few times and was not reallt successful in flight. This heli shown above on ebay has a sim and cable so I guess I could learn on it. Please give me some opinions on it please. It only has 16 hrs left!!! Oh, how is the sim that come with the heli, is it any good? Sorry for all the questions, I just want to be prepared. Thanks Rob [/quote]
Posted on: 9/25/2005 1:06 PM by Author "Crashnet2000" in the forum "Walkera Helis - Dragonfly, etc.."
http://www.rcuniverse.com/forum/fb.asp?m=3391994

RE: Walkera #4 Fixed Pitch Helicopter Forum
Thanks a lot ;)
Posted on: 9/25/2005 1:03 PM by Author "Crashnet2000" in the forum "Walkera Helis - Dragonfly, etc.."
http://www.rcuniverse.com/forum/fb.asp?m=3391984

RE: Walkera #4 Fixed Pitch Helicopter Forum
like this ? 1 on 2 off 3 on 4 off
Posted on: 9/25/2005 8:47 AM by Author "Crashnet2000" in the forum "Walkera Helis - Dragonfly, etc.."
http://www.rcuniverse.com/forum/fb.asp?m=3391388

RE: Walkera #4 Fixed Pitch Helicopter Forum
i havent done anything to overload it.. i think ;) The company i bought it from will ship out a new one including a new battery, they think the burned receiver was the batterys foult. What about the dipswitches ? Anyone who could share some info on how your settings are ? Thanks alot :)
Posted on: 9/25/2005 6:24 AM by Author "Crashnet2000" in the forum "Walkera Helis - Dragonfly, etc.."
http://www.rcuniverse.com/forum/fb.asp?m=3391212

RE: Walkera #4 Fixed Pitch Helicopter Forum
What are the correct dipswith settings ??? i can´t see anything in the damn Manual! i only see that the top4 is used but not how they are set.. Can someone help out before i really do something stupid ;) o yeah i almost forgot ! The damn 4in1 receiver burned out totaly it was not only the chip but the board and... every thing else it! What should i get instead ? Please help a novice out :) Thanks for all the help i got [sm=thumbup.gif]
Posted on: 9/24/2005 2:29 PM by Author "Crashnet2000" in the forum "Walkera Helis - Dragonfly, etc.."
http://www.rcuniverse.com/forum/fb.asp?m=3389399

RE: Walkera #4 Fixed Pitch Helicopter Forum
i swear i will never play with them again ! The damn rotor spins so fast when it hit me yesterday in the arm i thought it would brake the bones....
Posted on: 9/24/2005 5:48 AM by Author "Crashnet2000" in the forum "Walkera Helis - Dragonfly, etc.."
http://www.rcuniverse.com/forum/fb.asp?m=3388599

RE: Walkera #4 Fixed Pitch Helicopter Forum
I have the same problem with my new Dragonfly #4... I shakes like mad before lift off and when it starts to lift like 3 mm from the ground it starts to flip over to the right side ! OK i thought and started to play with the controler without diconnecting the battery wich was the dumbest thing i have done "i think". I played with the dip switches on the back and all of the sudden the damn thing goes wild..... i turned of the radio controller but the helicopter gave full throotle and started to glide around so i jumped in and grabed it. Almost took my eye out when i tryed to disconnect the battery.... When i was trying to disconnect the battery it started to smoke from the receiver "4in1", now i am sitting here with a broken rotor head core, fryed receiver and broken tail boom ! When i opened the receiver up i could see one chip standing up! hmmm it seems that i can solder it back... Can someone explain what the hell happend when i was playing with the dip switches.. I think it was the second one up that i toggled to the left ? Why does i wooble around like a maniac ?
Posted on: 9/24/2005 4:46 AM by Author "Crashnet2000" in the forum "Walkera Helis - Dragonfly, etc.."
http://www.rcuniverse.com/forum/fb.asp?m=3388562

RE: What parts for Dragonfly #4 ?
No a set ! Battery and motor, http://cgi.ebay.com/Brushless-Li-po-Power-Upgrade-SET-for-Dragonfly-35-36_W0QQitemZ6000530463QQcategoryZ2563QQrdZ1QQcmdZViewItem
Posted on: 9/21/2005 1:16 AM by Author "Crashnet2000" in the forum "Electric RC Helis"
http://www.rcuniverse.com/forum/fb.asp?m=3378562

RE: What parts for Dragonfly #4 ?
i saw motor set here... wich of them will work for my 4CH ? http://search.ebay.com/_W0QQfrtsZ50QQfsooZ1QQfsopZ1QQsassZgadgetom
Posted on: 9/20/2005 10:03 AM by Author "Crashnet2000" in the forum "Electric RC Helis"
http://www.rcuniverse.com/forum/fb.asp?m=3375758

RE: What parts for Dragonfly #4 ?
[quote]ORIGINAL: mazakari Hi Crashnet, Credence and sportygreg are both right. The Walkera 4 and the TRex are both completely different heli's. You can cross breed a little bit though. My vertical fin is off a TRex and so are my skids. Like90 make blades for the FP heli's and everyone who tries them loves them. They really transform this little heli. Just use your imagination!!![8D][:D] Jon My Walkera 4 [IMG]http://img.photobucket.com/albums/v196/mazakari/h1003.jpg[/IMG] [IMG]http://img.photobucket.com/albums/v196/mazakari/Fleet1.jpg[/IMG] [IMG]http://img.photobucket.com/albums/v196/mazakari/SigBlok2.jpg[/IMG] [/quote] I love your setup !!!! What is that antenna you are using ? I cant find anything like that here in Sweden, is it really for a RC or didi you use car/mobile antenna ? I was looking for parts here [link]http://www.mft.nu/align/upgrade-align.htm[/link] and this site [link]http://www.mft.nu/align/rotorblad.htm[/link] Maz can you please specifie what kind of upgrades you have done to your copter ? Thanks all for the info :)
Posted on: 9/20/2005 3:49 AM by Author "Crashnet2000" in the forum "Electric RC Helis"
http://www.rcuniverse.com/forum/fb.asp?m=3375248