RE: PLANS NEEDED
These are the basic plans for the viper . The bipe was saved on the same page , that's why I included it . Sorry for the lack of detail .
Posted on: 9/4/2012 10:24 PM by Author "D.J." in the forum ""1/2 A" & "1/8 A" airplanes"
http://www.rcuniverse.com/forum/fb.asp?m=11217902

RE: o.s 10. Am i in the right place? kit help.
I believe that this Hobby King j-3 kit would be a good candidate . The kit plus shipping to Canada would be $42.00 . There is also an ARF kit . I am having trouble uploading the thumbnail . http://www.hobbyking.com/hobbyking/store/uh_viewItem.asp?idProduct=22527 J3 Cub Balsa/Ply EP 1190mm (ARF)
Posted on: 8/23/2012 1:28 PM by Author "D.J." in the forum ""1/2 A" & "1/8 A" airplanes"
http://www.rcuniverse.com/forum/fb.asp?m=11203702

RE: TBM retracts for Al Masters DO-335
...
Posted on: 8/8/2012 10:01 AM by Author "Mr DJ" in the forum "RC Warbirds and Warplanes"
http://www.rcuniverse.com/forum/fb.asp?m=11185639

RE: TBM retracts for Al Masters DO-335
...
Posted on: 8/8/2012 9:59 AM by Author "Mr DJ" in the forum "RC Warbirds and Warplanes"
http://www.rcuniverse.com/forum/fb.asp?m=11185635

RE: TBM retracts for Al Masters DO-335
Pleased to assist...
Posted on: 8/8/2012 9:57 AM by Author "Mr DJ" in the forum "RC Warbirds and Warplanes"
http://www.rcuniverse.com/forum/fb.asp?m=11185634

RE: TBM retracts for Al Masters DO-335
Dave, I have TBM eRetracts for their Do 335. Chances are it will fit your bird. Have a look-see http://vimeo.com/47126424 If U think they will work, I can measure them for you. Mr DJ
Posted on: 8/8/2012 8:08 AM by Author "Mr DJ" in the forum "RC Warbirds and Warplanes"
http://www.rcuniverse.com/forum/fb.asp?m=11185290

RE: ESM Dornier DO 335
eRetract upgrade demo https://vimeo.com/47126424
Posted on: 8/7/2012 3:08 PM by Author "Mr DJ" in the forum "RC Warbirds and Warplanes"
http://www.rcuniverse.com/forum/fb.asp?m=11184712

RE: Rookie COG Question
Since it's hard to ballance a Canard it must be nearly impossible to balance a Mallard .
Posted on: 5/10/2012 1:58 PM by Author "D.J." in the forum ""1/2 A" & "1/8 A" airplanes"
http://www.rcuniverse.com/forum/fb.asp?m=11076141

Rookie COG Question
I often see plans with the COG symbol off in the middle of nowhere , either an inch or so above the wing or as in this case , in the middle of the window . Is this because of poor planning on the drafting table in not leaving room in the desired location or are you supposed to set up an apparatus for measuring the GOG in the middle of nowhere ? .... D.J.
Posted on: 5/9/2012 8:40 PM by Author "D.J." in the forum ""1/2 A" & "1/8 A" airplanes"
http://www.rcuniverse.com/forum/fb.asp?m=11075274

RE: Mr DJ at FLY EAGLE JET Factory in China
Lewis, Damo, and my Brother: Super Mario, As sang in '70s song by Sly and The Family Stone: It's a Family Affair Glad you all enjoyed my vid. Peace, Mr DJ
Posted on: 5/4/2012 3:32 PM by Author "Mr DJ" in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=11068626

RE: Mr DJ at FLY EAGLE JET Factory in China
.
Posted on: 5/3/2012 4:49 PM by Author "Mr DJ" in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=11067383

RE: Mr DJ at FLY EAGLE JET Factory in China
[quote]ORIGINAL: FenderBean Don't think it was mine I have the large with no yellow writing and gray japan dots [/quote] Fender, I wasn't talking about the one in the showroom, you'rs is in the work area sitting on a box; the one right before I show the lazor cutting. Mr DJ
Posted on: 5/3/2012 4:47 PM by Author "Mr DJ" in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=11067381

RE: Mr DJ at FLY EAGLE JET Factory in China
[quote]ORIGINAL: jet time Mr. DJ my OTHER brother! Great job on the video. Nice to see where it all happens. Love the "typical" Mr. DJ narration to!. Can't wait to make a trip there myself. Lowell [/quote] Lowell, my Brother from a different Mother. What's the haps??? Glad..., typical me. Mr DJ
Posted on: 5/3/2012 12:31 PM by Author "Mr DJ" in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=11067054

RE: Mr DJ at FLY EAGLE JET Factory in China
[quote]ORIGINAL: FenderBean Awesome video!!! looks like a good setup [/quote] FenderBean, what up... You have the Japanese 50th Blue edition F-15-correct? That was your puppy in the video - your F-14 wasn't ready for a photo shoot. Glad you like the vid. Mr DJ
Posted on: 5/3/2012 12:29 PM by Author "Mr DJ" in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=11067051

RE: Mr DJ at FLY EAGLE JET Factory in China
[quote]ORIGINAL: lookilook hey Mr.DJ, excellent video, thanks for sharing it !! [/quote] Lookilook, Many thanks. You're welcome and thanks for watching... Mr DJ
Posted on: 5/3/2012 12:27 PM by Author "Mr DJ" in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=11067047

RE: Mr DJ at FLY EAGLE JET Factory in China
[quote]ORIGINAL: basimpsn Wow Mr DJ I really enjoy that video [8D] Remind me of this song ONE NIGHT IN BANGKOK but this time its in China [8D]. I guess you just get back when I saw you at the field last Sunday [;)] [/quote] Basimpsn, What up? Glad you enjoyed my short video. I have over 5 hours...... Mr DJ
Posted on: 5/3/2012 12:25 PM by Author "Mr DJ" in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=11067043

RE: Mr DJ at FLY EAGLE JET Factory in China
<![if gte mso 9]> <w:lidthemecomplexscript></w:lidthemecomplexscript> <![endif]><![if gte mso 9]> <![endif]><![if gte mso 10]><![endif]> Several hours of FEJ footage cropped to 30 minutes plus bits and pieces of a small China town. http://vimeo.com/41450332 Mr DJ
Posted on: 5/3/2012 3:31 AM by Author "Mr DJ" in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=11066506

RE: Mr DJ at FLY EAGLE JET Factory in China
for immediate repair - not a bad setup. Mr DJ
Posted on: 5/3/2012 3:26 AM by Author "Mr DJ" in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=11033751

RE: Mr DJ at FLY EAGLE JET Factory in China
<![if gte mso 9]> <w:lidthemecomplexscript></w:lidthemecomplexscript> <![endif]><![if gte mso 9]> <![endif]><![if gte mso 10]><![endif]> Eric, my Man… Never a bother from a former and fellow GI – Mr DJ: US Air Force (Ret Disabled Veteran). I will post... have to get with James for accurate details on the F-16, but my info is correct on the Rafale. Mr DJ
Posted on: 5/3/2012 3:23 AM by Author "Mr DJ" in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=11041203

RE: Mr DJ at FLY EAGLE JET Factory in China
[quote]ORIGINAL: dubd Mr DJ, Which major cit is FEJ near. I've always wanted to visit a model factory on my trip to China. [/quote] Dudb, http://en.wikipedia.org/wiki/Guangzhou - Guangzhou - pronounced: Guang Ju Mr DJ
Posted on: 5/3/2012 3:21 AM by Author "Mr DJ" in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=11041169

RE: Schoolboy build thread
Just in case some out there don't know where to find the plans , here they are at Outerzone . http://www.outerzone.co.uk/plan_details.asp?ID=1030 .... D.J.
Posted on: 4/20/2012 2:31 PM by Author "D.J." in the forum ""1/2 A" & "1/8 A" airplanes"
http://www.rcuniverse.com/forum/fb.asp?m=11050223

RE: Mr DJ at FLY EAGLE JET Factory in China
Don't know if scale, but operated by two servos. Mr DJ
Posted on: 4/13/2012 1:58 PM by Author "Mr DJ" in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=11040601

RE: Mr DJ at FLY EAGLE JET Factory in China
<![if gte mso 9]> <w:lidthemecomplexscript></w:lidthemecomplexscript> <![endif]><![if gte mso 9]> <![endif]><![if gte mso 10]><![endif]> Viper struts below show the air valve, no more springs. You add as much or as little air that you want for firmer or softer spring-like action. Mr DJ
Posted on: 4/13/2012 1:11 AM by Author "Mr DJ" in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=11039919

RE: Mr DJ at FLY EAGLE JET Factory in China
Fender Can't give you a sneak photo; company prefer only completed birds to be shown... Mr DJ
Posted on: 4/10/2012 7:31 PM by Author "Mr DJ" in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=11036988

RE: Mr DJ at FLY EAGLE JET Factory in China
Gio The P40 has been ready for a long time, you just need to place an order with James... Mr DJ
Posted on: 4/10/2012 7:27 PM by Author "Mr DJ" in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=11036983

RE: Mr DJ at FLY EAGLE JET Factory in China
Super Mario, my Brother... U R 2 funny, but your are right, I will learn how to say my favorite words and sayings in Chinese I am in China, not Taiwan... Next time will be Taiwan... And be sure to tell my sister, Maria that her gift is in the mail I'm workin' from my New iPad (iPad 3); working out pretty well. Does anyone know how to zoom while in video mode - mine does not want to operate as such - maybe it can't.
Posted on: 4/10/2012 7:19 PM by Author "Mr DJ" in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=11036965

RE: Mr DJ at FLY EAGLE JET Factory in China
Here are a few shots of a NEW F-14 with slats. Gio, Fender, Kevin: when James returns from Taiwan (visiting parents), I will try to find your birds for a sneak photo and the info on the P40. Mr DJ
Posted on: 4/9/2012 6:58 PM by Author "Mr DJ" in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=11035288

RE: Mr DJ at FLY EAGLE JET Factory in China
I for sure saw your F-15, it's sitting right there. There are many F-14s being worked, not sure if I actually saw yours, but I will c what I can see. So is it a Transformer scheem? Mr DJ
Posted on: 4/8/2012 8:15 PM by Author "Mr DJ" in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=11033840

RE: Mr DJ at FLY EAGLE JET Factory in China
No spy shots yet althought I may have seen it; just didn't know who it belonged to. Will see what I can do. Mr DJ
Posted on: 4/8/2012 8:05 PM by Author "Mr DJ" in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=11033827

RE: Mr DJ at FLY EAGLE JET Factory in China
I will post videos of me flying a few birds once I return; no access toVimeo or YouTube in China. I never did really like the Viper Jet, but now that I have flown it, I think it will be added to my small Air Force. My video will give you a short tour of the factory but I won't reveal all for obvious reasons. Anyways, that's it for now, off to run the streets of China. Peace. Mr DJ
Posted on: 4/7/2012 8:31 PM by Author "Mr DJ" in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=11032472