RE: Organized R/C Tank Clubs & Insurance?
If you have homeowners insurance, check with them. My house ins. covers transportation to and from the event, at the event liability and property damage to the amount of my policy. I did check for event group coverage for SWAG (our club) and it was unreal. You might try AMA. I called them once and asked if they cover tanks. There is a size limit but they said they will. My cats where way beyond the limit so no go for me.
Posted on: 12/4/2010 9:49 AM by Author "DAP" in the forum "RC Tanks"
http://www.rcuniverse.com/forum/fb.asp?m=10175594

RE: Is this real or Photoshop?
I have seen this picture before. The following discription was provided. The "plow on the Tiger is not a snowplow to clear a road, but to enable the Tiger to move in the snow. Without it the front of the hull will pack snow under the center of the tank. the Tiger will move forward packing more and more snow under it until the snow supports more of the tank's weight than the track uses for traction. When it reaches this point the tank stops moving forward and the tracks just spin. The vehicle is stuck unti the snow is dug out or the tank is pulled off the packed snow. The plow diverts the snow from the hull to be packed under the tracks, keeping the weight of the Tiger on its track and not the hull botom. The tank can keep moving forward or backwards in its own path
Posted on: 10/10/2010 3:37 PM by Author "DAP" in the forum "RC Tanks"
http://www.rcuniverse.com/forum/fb.asp?m=10059822

RE: Deep DOO DOO
Yes. Come to the dark side.
Posted on: 9/7/2010 9:31 AM by Author "DAP" in the forum "RC Tanks"
http://www.rcuniverse.com/forum/fb.asp?m=9985724

RE: 1/6 Armortek King Tiger
Good luck lifting that one. [:@] Cactus Tracks Tanks is working on a 1/6th Pershing at the moment. Its not listed on the web site though. It will be delivered assembled. Price would be the same as any other high end 1/6th toy.
Posted on: 8/24/2010 7:12 PM by Author "DAP" in the forum "RC Tanks"
http://www.rcuniverse.com/forum/fb.asp?m=9957436

RE: Blitzkrieg Armour 1/6 Panzer IV Review
"Blitzkrieg Armour has announced they've closed." Could you explain? I see nothing on the web site about closing. Thnxs
Posted on: 8/7/2010 8:43 PM by Author "DAP" in the forum "RC Tanks"
http://www.rcuniverse.com/forum/fb.asp?m=9917522

RE: 1/6 stuart-plan for a gun with a
Thanks for the heads up on the static. I plan to spend a great deal of time on research before I even buy supplies. Not looking forward to the mess.
Posted on: 8/3/2010 9:44 PM by Author "DAP" in the forum "RC Tanks"
http://www.rcuniverse.com/forum/fb.asp?m=9909294

RE: 1/6 stuart-plan for a gun with a
Im guessing the internal pressure will be a little much for the Stuart turret. I have a "disposable" Stuart that I would like to try this on. You can find poppers on the internet. My last bunch came from Tenn. if I remember right. I just got a Lee .12g reloader and will be starting the learning process for black powder blanks. I have an Armortek 12 guage unit in my Jagdpanther. I'll be watching your progress BIGMIG.[:D]
Posted on: 8/3/2010 10:02 AM by Author "DAP" in the forum "RC Tanks"
http://www.rcuniverse.com/forum/fb.asp?m=9907808

RE: Has the RC tank bubble
Most of the sixth scale people seem to have bailed. I dont bother comming around much anymore either.
Posted on: 7/31/2010 11:17 PM by Author "DAP" in the forum "RC Tanks"
http://www.rcuniverse.com/forum/fb.asp?m=9902294

video
This video was filmed and edited by PlaneVideoArt from a recent rc plane event. [youtube]http://www.youtube.com/watch?v=KG4hwoSqbvU[/youtube]
Posted on: 7/8/2010 9:53 AM by Author "DAP" in the forum "RC Tanks"
http://www.rcuniverse.com/forum/fb.asp?m=9851885

RE: Sankyo R/C 1/12 Tanks
I had both. I wouldnt recommend either.
Posted on: 3/31/2010 7:06 PM by Author "DAP" in the forum "RC Tanks"
http://www.rcuniverse.com/forum/fb.asp?m=9627996

RE: M3 Halftrack metal body & chassis 1/6
That "H-13" halftrack was done by Victor Lou of Southwest Armor Group. All the detail parts & paint/weathering where added by him. That unit was going to be converted to rc but was never finished. Randy Killen is the designer/producer of the kit. (http://www.randykillendesign.com/) Randy has a new project that will probably be announced at the Weekend of Heroes event in June. It will be in 1/6th scale and I think it will be well received. There are more pictures at our website [link=http://www.southwestarmorgroup.com]Southwest Armor Group[/link] in the gallery section.
Posted on: 2/28/2010 12:47 PM by Author "DAP" in the forum "RC Tanks"
http://www.rcuniverse.com/forum/fb.asp?m=9542858

RE: plastic tanks with metal parts or full metal tanks?
Heavy metal.
Posted on: 2/14/2010 8:40 PM by Author "DAP" in the forum "RC Tanks"
http://www.rcuniverse.com/forum/fb.asp?m=9504752

RE: WWI tank tracks
I was considering a 1/6th scale MK series. That would be a large model. I too was looking for the actual track design.
Posted on: 1/24/2010 11:39 PM by Author "DAP" in the forum "RC Tanks"
http://www.rcuniverse.com/forum/fb.asp?m=9445369

RE: Help with my M5 stuart and Abrams tank's
Save the motor & trans and trash the rest. I bought one new awhile back and it didnt work outa the box. Real P.O.S. Wasent worth the upgrade time much less expense.
Posted on: 1/1/2010 12:35 PM by Author "DAP" in the forum "RC Tanks"
http://www.rcuniverse.com/forum/fb.asp?m=9377641

RE: Finally it has arrived ... a 1/4 ... Luftwaffe pilot
Hatakashi, I have been thinking about going to quarter scale but the availability of add ons is tuff. Nice find.
Posted on: 12/20/2009 1:38 PM by Author "DAP" in the forum "RC Tanks"
http://www.rcuniverse.com/forum/fb.asp?m=9346014

RE: black powder
I have a 12g, six shot, black powder blank unit in my Jagpanther. It uses short (1" ) blank shells. Sometimes I just fire primers. Needs to be cleaned after every use and handled with respect. Not only because of the powder but the 24v motor and exposed gears can be hard on fingers. Nice boom, plenty of smoke. Electronics are protected behind a bulkhead. Follow the link to a few pics. [link=http://www.southwestarmorgroup.com/Secret%20page.htm]SWAG[/link]
Posted on: 12/17/2009 9:55 AM by Author "DAP" in the forum "RC Tanks"
http://www.rcuniverse.com/forum/fb.asp?m=9338075

RE: New 1/6 Scale Tank
Im not big on British armor but I like the Comet. Being mfg. in England I think it will sell very well there. Depending on the number produced it will probably sell out quick. There is also two all metal 1/6th static models comming out. Not from Armortek but from China. A Stug and a Hetzer. I will be looking seriously at them for rc'ing. The Hetzer is around $1050.00 plus shipping. Very reasonable for all metal 1/6th.
Posted on: 11/21/2009 1:22 AM by Author "DAP" in the forum "RC Tanks"
http://www.rcuniverse.com/forum/fb.asp?m=9269251

RE: 1/6th Jagdpanther
Ah yes. I had a MG midget myself. Hatefull little P.O.[:@]S.
Posted on: 11/14/2009 11:49 PM by Author "DAP" in the forum "RC Tanks"
http://www.rcuniverse.com/forum/fb.asp?m=9254474

RE: 1/6th Jagdpanther
Yellowshaker, The 21C Stuarts are very reasonable and there are some very nice upgrades. Mine have been excellent runners. Like Bigmig said. They are a steping stones.
Posted on: 11/14/2009 8:05 PM by Author "DAP" in the forum "RC Tanks"
http://www.rcuniverse.com/forum/fb.asp?m=9254017

RE: 1/6th Jagdpanther
These are the results of six years collecting. I have several more Stuarts but they are stock in the box. I built one Tam Sherman and then moved to 1/6th. Never looked back. Im thinking 1/4th next. Space is starting to be an issue. Sheograth, Its true the Armorteks sell out fast and with a small production run it dosent take long. I have a large collection of photos from the Jagd. build. Esp. problem areas. For an expensive kit they dont go together anything like you would think. Major file work.
Posted on: 11/14/2009 6:55 PM by Author "DAP" in the forum "RC Tanks"
http://www.rcuniverse.com/forum/fb.asp?m=9253838

1/6th Jagdpanther
It finally sees the light of day. A few adjustments to make yet. Six shot twelve guage blank unit is due monday. A nice growl for the cat. [link=http://www.southwestarmorgroup.com/Secret%20page.htm]Jagd. pics.[/link]
Posted on: 11/14/2009 4:40 PM by Author "DAP" in the forum "RC Tanks"
http://www.rcuniverse.com/forum/fb.asp?m=9253517

RE: Just bought used 1/6 M5 Stuart Tank-
Duca, Jack makes excellent tracks for the 21C Stuart. As well as some detail parts. He is a member of Southwest Armor Group and his email can be found on our site on the "contacts" page. [link=http://www.southwestarmorgroup.com]Southwest Armor Group.[/link]
Posted on: 10/29/2009 8:05 PM by Author "DAP" in the forum "War Room"
http://www.rcuniverse.com/forum/fb.asp?m=9213455

RE: bought used 1/6 M5 Stuart Tank(up-dated)2-Used-1-New Plus 1/6 humvee
I have seen youtube videos of converted Ket's. I think I would rather do a BMW & sidecar. OK. Add that to the list. Bike & sidecar. At least it wont take up so much room.
Posted on: 10/23/2009 11:21 AM by Author "DAP" in the forum "War Room"
http://www.rcuniverse.com/forum/fb.asp?m=9195929

RE: bought used 1/6 M5 Stuart Tank(up-dated)2-Used-1-New Plus 1/6 humvee
Big scale guys are still around, just quiet. I will finish my Armortek Jagdpanther in about three weeks. Waiting on motors. Then its either a 1/6 elephant or converting a 1/6th Patton command car to rc.
Posted on: 10/23/2009 9:41 AM by Author "DAP" in the forum "War Room"
http://www.rcuniverse.com/forum/fb.asp?m=9195704

RE: What's the most $$$$ you ever spent on this hobby in one day?
A little over eight thousand for the Tiger, option 1 pack, batteries and radio.
Posted on: 10/14/2009 12:08 PM by Author "DAP" in the forum "RC Tanks"
http://www.rcuniverse.com/forum/fb.asp?m=9172587

RE: Benedini TBS5 Tiger sound test
Thank you for the review. I am looking for a sound unit for my Armortek Jagdpanther and the Benedini was of course one of the options. After reading this Im not sure about the "hiccups". Does sound good though.
Posted on: 10/6/2009 3:21 PM by Author "DAP" in the forum "RC Tanks"
http://www.rcuniverse.com/forum/fb.asp?m=9151611

RE: JAGDPANTHER ONLY PHOTO THREAD
Here is the progress on my Jagd. Still waiting on motors but at least the paint job is done.
Posted on: 9/8/2009 8:25 PM by Author "DAP" in the forum "RC Tanks"
http://www.rcuniverse.com/forum/fb.asp?m=9079918

RE: scale parts site for 21 century stuart tank
Try the following. Armorpax.com, R-C-Tanks.com, steeldragons.net for a few. Keep in mind that steel dragons is VERY slow (at least for me) at shipping but has always come through. If you want some excellent tracks try emailing Jack (jackntbox@yahoo.com). These offer much better traction as well as looking like the real thing. Jack is also working on some very nice idlers. Ask about the srew hole plugs too. I know Jack is busy filling orders so there may be a little wait.
Posted on: 8/23/2009 11:42 AM by Author "DAP" in the forum "RC Tanks"
http://www.rcuniverse.com/forum/fb.asp?m=9037766

RE: 21st Century STUART Tank 1/6 Scale
Hey bhop73, Shoot me a pm with your asking price. Im in north OC. I may have room for just one more.
Posted on: 8/21/2009 9:41 AM by Author "DAP" in the forum "RC Tanks"
http://www.rcuniverse.com/forum/fb.asp?m=9033265

RE: JAGDPANTHER ONLY PHOTO THREAD
Building continues. Waiting for motors/esc's and a couple of parts. Then on to camo and weathering.
Posted on: 7/31/2009 7:13 PM by Author "DAP" in the forum "RC Tanks"
http://www.rcuniverse.com/forum/fb.asp?m=8979855