RE: How to avoid purchasing a fake DLE Engines
My commercial brush cutter with 5 year warranty cost the same as a dle30 engine alone. I imagine the markup on these engines is steep.
Posted on: 6/15/2013 12:07 PM by Author "DG40" in the forum "Gas Engines"
http://www.rcuniverse.com/forum/fb.asp?m=11544084

RE: Ouch!!!!
maybe turtle racing will come out with some $1000.00 billet bling shin guards.
Posted on: 6/12/2012 12:22 PM by Author "DG40" in the forum "RC Giant Scale Cars"
http://www.rcuniverse.com/forum/fb.asp?m=11115791

RE: Savage Flux - alternative to Deans?
Deans on the planes Traxxas on the cars, Up to a Kilowatt. Any more and I'd rather burn gas. But if I were to go big E-power I'd use power poles.
Posted on: 6/4/2012 6:40 AM by Author "DG40" in the forum "HPI Monster Truck Forum"
http://www.rcuniverse.com/forum/fb.asp?m=11105708

RE: T Maxx 3.3 pull starter Broke
Yup. You can buy just the string for a couple bucks.
Posted on: 5/10/2012 5:16 PM by Author "DG40" in the forum "Traxxas Monster Truck forum"
http://www.rcuniverse.com/forum/fb.asp?m=11076321

RE: New to RC, please help!
Stay away from exceed. Here is a review of one of there trucks. Others are similar. I watch them because it's funny how crappy they are. [youtube]http://www.youtube.com/watch?v=DuCP9ZJmY2w[/youtube]
Posted on: 4/30/2012 12:11 PM by Author "DG40" in the forum "HPI Monster Truck Forum"
http://www.rcuniverse.com/forum/fb.asp?m=11062809

RE: Official HPI MT2 Thread
Hi, I've been looking in classified and eBay for a mt2 and thought I'd ask here. Would anyone like to sell a mt2? Send a pm if ya have a decent one to spare. I have a new engine looking for a home so without engine is a plus. Thanks
Posted on: 4/7/2012 5:02 AM by Author "DG40" in the forum "RC Nitro Stadium Trucks"
http://www.rcuniverse.com/forum/fb.asp?m=11031653

RE: NGK CM-6 Plugs
My weed whacker isn't worth two thousand dollars, isn't made of balsa wood and won't fall 100 feet if the plug fails. yeah I pitch that clean two dollar plug every spring. Too bad my weed whackers and chain saws didn't use CM6 plugs. ____________________________________________ hmmm not a reply just a comment. how to undo that.
Posted on: 4/16/2011 4:22 AM by Author "DG40" in the forum "Gas Engines"
http://www.rcuniverse.com/forum/fb.asp?m=10465735

RE: Powering Gas Ignition?
Read the description on this IBEF from Troy Built models [link]http://www.troybuiltmodels.com/items/WRCIBEFV2.html[/link] I use this one without issue on Hitec 2.4
Posted on: 4/13/2011 10:06 AM by Author "DG40" in the forum "Gas Engines"
http://www.rcuniverse.com/forum/fb.asp?m=10460462

RE: Optimum prop for DLE 30
[quote] ORIGINAL: mcandies DLE 30 for [b]3D[/b]. This will be going on a 3DH 71'' Slick. 9 - 10 lbs. [/quote] Xoar 19x3DA
Posted on: 4/5/2011 11:27 AM by Author "DG40" in the forum "Gas Engines"
http://www.rcuniverse.com/forum/fb.asp?m=10444708

RE: Yet another what should i buy thread. sorry
Hi :) I got the same dilemma. I've been looking at the slash or the savage flux. what i want is something that handles like my rustler vxl but with 4wd. i had a stampede but was way too top heavy and tipped over too much. durability is also important. Thought about a brushless revo but understand they're kinda fragile. so, savage sounds the way to go but don't want to regret spending 600 bux when I would be happier with a 300 dollar truck. is the savage tippy like a stampede?
Posted on: 3/15/2011 10:39 AM by Author "DG40" in the forum "RC Electric Off-Road Trucks, Buggies, Truggies and more"
http://www.rcuniverse.com/forum/fb.asp?m=10401591

RE: DLE 30 prop
Xoar 18x3DA or 19x3DA I just like the feel of these props for 3D
Posted on: 2/9/2011 12:53 PM by Author "DG40" in the forum "Gas Engines"
http://www.rcuniverse.com/forum/fb.asp?m=10323843

RE: want to start, what to get, RTF?
FLASH EPP for outdoors[;)] [link]http://www.soaringusa.com/products/product.htm?product_id=16738&category_id=264[/link] With a hacker 20-20l and 18 A ESC and four HS-55's Mine's a couple years old and heavy as hell from all the glue... And still flying. Only ever replaced a couple servos cause I wore them out[sm=lol.gif]
Posted on: 12/27/2010 6:47 AM by Author "DG40" in the forum "3D Electric Flying!"
http://www.rcuniverse.com/forum/fb.asp?m=10220470

RE: DLE30 experiences please
[quote]ORIGINAL: Eganwp Many people have dead sticks on the side carb version, hence the release of v2 (rear carb) DLE-30. It solves all the fuel supply issues and has completely fixed the dead stick issue from all the review's I've read. [/quote] I've haven't had any dead stick issues yet with my side carb DLE30. Of coarse my plane doesn't fly very long at an extended idle. [sm=spinnyeyes.gif]
Posted on: 11/30/2010 6:24 AM by Author "DG40" in the forum "Gas Engines"
http://www.rcuniverse.com/forum/fb.asp?m=10167175

RE: DLE 30 replacement carb
Would all/any of these work? wt-257 [link]http://www.davesmotors.com/s.nl/c.885035/n.1/it.A/id.4143/.f[/link] wt-603 [link]http://www.davesmotors.com/s.nl/c.885035/n.1/it.A/id.4112/.f[/link] wt-668 [link]http://www.davesmotors.com/s.nl/c.885035/n.1/it.A/id.4111/.f[/link] wt-644 [link]http://www.davesmotors.com/s.nl/c.885035/n.1/it.A/id.4126/.f[/link]
Posted on: 11/30/2010 6:08 AM by Author "DG40" in the forum "Gas Engines"
http://www.rcuniverse.com/forum/fb.asp?m=10167160

RE: NEW DLE 20cc Gasser!
[quote]ORIGINAL: airborne2.4 [quote]ORIGINAL: ghoffman This is what my 2nd DLE-20 is going on next: http://www.3dhobbyshop.com/68-VeloxYellow_p_15302.html <!StartFragment><font color=''#0000FF''><a href=''http://www.youtube.com/watch?v=KMzWXIYGveM''>http://www.youtube.com/watch?v=KMzWXIYGveM <!EndFragment>   [/quote] If you look at the pictures closely on the site, It appears as if the Velox has a gasser up front, can't make out if it's the DLE 20 though. The video[X(] [/quote] Looks like a DLE20
Posted on: 11/19/2010 8:29 AM by Author "DG40" in the forum "Gas Engines"
http://www.rcuniverse.com/forum/fb.asp?m=10145004

RE: NEW DLE 20cc Gasser!
What about Shihl HP Ultra? I think that's the stuff so many swear by around here:)
Posted on: 11/16/2010 4:47 PM by Author "DG40" in the forum "Gas Engines"
http://www.rcuniverse.com/forum/fb.asp?m=10139449

RE: NEW DLE 20cc Gasser!
Wish it was mine. Found the video this morning on RCG and thought others might like to see it.
Posted on: 11/14/2010 11:34 AM by Author "DG40" in the forum "Gas Engines"
http://www.rcuniverse.com/forum/fb.asp?m=10134435

RE: looking to get into gas boating
Didn't receive any email yet. Maybe try PM.
Posted on: 11/14/2010 10:42 AM by Author "DG40" in the forum "Speed - RC Gas Boats"
http://www.rcuniverse.com/forum/fb.asp?m=10134453

RE: NEW DLE 20cc Gasser!
First video of 3DHobbyShop 68" Velox w/ DLE20 [youtube]http://www.youtube.com/watch?v=KMzWXIYGveM&feature=player_embedded[/youtube]
Posted on: 11/14/2010 8:35 AM by Author "DG40" in the forum "Gas Engines"
http://www.rcuniverse.com/forum/fb.asp?m=10134289

RE: looking to get into gas boating
hi. i got a nice WHH gas boat for sale on another forum . RCG same username. take a look. possible driving distance.
Posted on: 11/12/2010 1:50 PM by Author "DG40" in the forum "Speed - RC Gas Boats"
http://www.rcuniverse.com/forum/fb.asp?m=10131270

RE: Oil mix ratio for DLE engines
[image]http://www.funnypicturemarathon.com/photos/1254037052.gif[/image]
Posted on: 10/20/2010 12:17 PM by Author "DG40" in the forum "Gas Engines"
http://www.rcuniverse.com/forum/fb.asp?m=10081121

RE: I don't know how to plumb a gasser tank
Dubro fuel line barbs for both 1/8 and 5/32. [link]http://www.shopatron.com/products/productdetail/part_number=813/101.0.1.1[/link] http://www.shopatron.com/products/productdetail/part_number=814/101.0.1.1 I like these spring clips. They stay on whether the fuel line is swollen or not. 1/8 and 3/32 [link]http://www.shopatron.com/products/productdetail/part_number=678/101.0.1.1[/link] [link]http://www.shopatron.com/products/productdetail/part_number=677/101.0.1.1[/link]
Posted on: 10/13/2010 7:34 PM by Author "DG40" in the forum "Gas Engines"
http://www.rcuniverse.com/forum/fb.asp?m=10066915

RE: aeroworks .90 to 1.20 yak 54
Just took a pic but can't upload with the iphone. Have to wait till the wife is done playing games on the computer.[:-] After looking at it again, it is about as wide as the muffler because of the muffler. I'll post the pic in a little while.
Posted on: 9/12/2010 8:20 PM by Author "DG40" in the forum "Aero-Works Support"
http://www.rcuniverse.com/forum/fb.asp?m=9997548

RE: aeroworks .90 to 1.20 yak 54
BTW, My cowl opening is way smaller than the one in those pics. My opening goes around the head and back just to clear the stingers.
Posted on: 9/12/2010 7:46 PM by Author "DG40" in the forum "Aero-Works Support"
http://www.rcuniverse.com/forum/fb.asp?m=9997451

RE: aeroworks .90 to 1.20 yak 54
I'm using Xoar 18x8 and 19x6. As it is I had to remove the wheel pants and put bigger wheels on to keep from breaking props[:(]. If I had a paved runway I'd like to try a 20x6. Other guys on other forums think that the 20x6 is the magic number for 3D w/ the DLE30 on this size plane. The pics are a few pages back from the last. [link]http://www.rcuniverse.com/forum/m_4099610/mpage_104/key_/tm.htm[/link]
Posted on: 9/12/2010 7:15 PM by Author "DG40" in the forum "Aero-Works Support"
http://www.rcuniverse.com/forum/fb.asp?m=9997381

RE: aeroworks .90 to 1.20 yak 54
3: I got a dubro tank because of the gas compatible fuel stopper and moved it back next to the wing tube to try to keep proper CG through the flight. 1: That left me with putting the ignition on top of the motor box under the cowl. 2:I had to cut the bottom pretty good but the JTec muffler sounds really nice and worth it. Actually I think the stock muffler would have needed a lot more "visible" cutting. Meaning the stock muffler would have needed the side of the cowl cut and the pitts only needed the bottom cut. It worked out because this engine now has plenty of airflow and you only see when in hover or knife edge.
Posted on: 9/12/2010 11:01 AM by Author "DG40" in the forum "Aero-Works Support"
http://www.rcuniverse.com/forum/fb.asp?m=9996413

RE: aeroworks .90 to 1.20 yak 54
DLE 30 Side carb is perfect fit but you need an additional 1/2 inch stand off to get the back plate to where manufacture wants it. I used this 1/2 inch stand off from PSPMfg.com. http://www.pspmfg.com/RCStandOffsMotorSpacers.html BTW, no additional dead weight needed. The DLE balances the plane very well and has plenty of power to pull out of hover if 3D is your thing [;)].
Posted on: 9/12/2010 8:40 AM by Author "DG40" in the forum "Aero-Works Support"
http://www.rcuniverse.com/forum/fb.asp?m=9996241

RE: NEW DLE30!
[quote]ORIGINAL: jasser222 Hello, I life in Europe so we can't have very loud engines so I need an muffler or tuned pipe wich is more quiet. Or do you guys know other mufflers? Jasper [/quote] This one is designed specifically for the DLE30 http://www.3dhobbyshop.com/detail.aspx?ID=2616 ADChobbystore.com is a distributor for 3DHobbyshop and ships internationally. Send them an e-mail and see if they can get one for you.
Posted on: 7/7/2010 11:20 AM by Author "DG40" in the forum "Gas Engines"
http://www.rcuniverse.com/forum/fb.asp?m=9849822

RE: Introducing the new 90-1.20 Yak QB
Agreed[:D] But it's better than installing a new expensive prop every flight[;)] I was thinking about finding/making pants that sit right behind the wheel. Like this http://www.topmodelproduction.com/picselectric/Yak55-XP-5-5.jpg
Posted on: 7/2/2010 9:08 AM by Author "DG40" in the forum "Aero-Works Support"
http://www.rcuniverse.com/forum/fb.asp?m=9840244

RE: Introducing the new 90-1.20 Yak QB
I took the wheel pants off and put bigger wheels on. Made a big difference. Simple and cheap.
Posted on: 7/1/2010 9:39 PM by Author "DG40" in the forum "Aero-Works Support"
http://www.rcuniverse.com/forum/fb.asp?m=9839506