|
RE: Vacuum Forming
I don't know, but a shop vac works GREAT! Darrell B.
Posted on: 9/14/2009 9:08 PM by Author "Darrell B."
in the forum "RC Scale Aircraft"
http://www.rcuniverse.com/forum/fb.asp?m=9096005
RE: High Voltage ESC's
Tom, I have used both the Sentillion 100 and Castle HV110. I like both of them, but I don't push either one of them very hard. My setups tend to be over designed as far as the ESC is concerned. With the Sentillion be sure to get the programer card for $7. It is a no brainer and really makes setup easy. I have only used it on 10s but I hear that 12s is just as good. The Castle 110 is great and can really be pushed hard. I have used it on 12s and it will easily handle 110 Amps. I have two of these and have never had any trouble with them. I wish that they would make a higher voltage model available.
Posted on: 3/28/2009 11:53 AM by Author "Darrell B."
in the forum "Brushed/Brushless motors, speed controls, gear drives"
http://www.rcuniverse.com/forum/fb.asp?m=8625484
RE: 1/4 Scale Balsa USA J-3 Cub
94" cub and only has $200 in his power system. Good luck on this project. Darrell B.
Posted on: 3/13/2009 4:14 PM by Author "Darrell B."
in the forum "Glow to Electric Conversions"
http://www.rcuniverse.com/forum/fb.asp?m=8574506
RE: Electric Wood Props
Has anyone tried the Xoar props in the larger sizes. I'm looking at the 22x10E and was wondering how it would compare with APC and Mejzlik? Thanks, Darrell B.
Posted on: 3/4/2009 1:38 PM by Author "Darrell B."
in the forum "Brushed/Brushless motors, speed controls, gear drives"
http://www.rcuniverse.com/forum/fb.asp?m=8543345
RE: Xoar Electric Props
Can someone chime in here as to how these compare with APC props. I'm interested in Amp draw and Rpm comparisons. Thanks, Darrell B.
Posted on: 3/4/2009 1:34 PM by Author "Darrell B."
in the forum "Product Announcements & Manufacturer News"
http://www.rcuniverse.com/forum/fb.asp?m=8543333
RE: Rhino Lithium Batteries
I don't think that the Rhino packs are just relabled cells. Especially the larger 4900mAh cells. I have noticed that several of the manufacturers in the states are still stacking smaller cells to come up with the larger acpacity packs. 2p 3p 4p.....I have owned several of these, and if one cell goes bad the whole pack is bad. I think that with fewer cells that there is less to go wrong. Just my 2c worth.
Posted on: 2/25/2009 1:42 PM by Author "Darrell B."
in the forum "E-Flight Power Sources"
http://www.rcuniverse.com/forum/fb.asp?m=8517151
RE: 1/5 scale Bell P-39 Aircobra...
is ready to go. Darrell
Posted on: 2/24/2009 5:37 PM by Author "Darrell B."
in the forum "RC Warbirds and Warplanes"
http://www.rcuniverse.com/forum/fb.asp?m=8513993
RE: Saab J-21
Peder F, Judging from your last post this project wouldn't be any more difficult than the Bell P-39 that I am finishing up for this spring. It has taken me almost two years but the results will be very satisfying. Darrell B.
Posted on: 2/12/2009 5:14 PM by Author "Darrell B."
in the forum "RC Scale Aircraft"
http://www.rcuniverse.com/forum/fb.asp?m=8469769
RE: 1/5 Top Flight P-51 Electric
Any Updates?
Posted on: 2/11/2009 1:47 PM by Author "Darrell B."
in the forum "RC Warbirds and Warplanes"
http://www.rcuniverse.com/forum/fb.asp?m=8465296
RE: Saab J-21
Peder, Are the fiberglass parts available for pruchase from someone? I would also be interested in plans for your fantastic looking plane. Thanks, Ragards from United States, Darrell Button
Posted on: 2/9/2009 4:56 PM by Author "Darrell B."
in the forum "RC Scale Aircraft"
http://www.rcuniverse.com/forum/fb.asp?m=8457768
RE: TF 1/5 Scale P-51 ARF Assembly (1ST MISHAP!!!)
Unless a person has really deep pockets the will mix servos like this and put the digital ones where they are needed.
Posted on: 12/26/2008 7:50 PM by Author "Darrell B."
in the forum "RC Warbirds and Warplanes"
http://www.rcuniverse.com/forum/fb.asp?m=8285403
RE: Vacuum Forming
So where is everyone buying their plastic, especially clear for canope's? Thanks, Darrell
Posted on: 12/17/2008 1:17 PM by Author "Darrell B."
in the forum "RC Scale Aircraft"
http://www.rcuniverse.com/forum/fb.asp?m=8255081
RE: P-39 Airacobra anything thread!
besides painting, I'm terrible at freehand , I would love to hear them. Darrell
Posted on: 12/16/2008 4:21 PM by Author "Darrell B."
in the forum "RC Warbirds and Warplanes"
http://www.rcuniverse.com/forum/fb.asp?m=8252297
RE: Basic Vacuum Forming
Opting in on this onel
Posted on: 12/16/2008 9:44 AM by Author "Darrell B."
in the forum "RC Scale Aircraft"
http://www.rcuniverse.com/forum/fb.asp?m=8251066
RE: 1/5 scale Bell P-39 Aircobra...
Hello to all who have been folowing this thread. I thought that I would post a few progress pics of the Pepino P-39. They are in progressive order of how the changes progressed in the build. Most of the current progress has occured in the last two months. I still need to build a vacuum box and pull a canope!
Posted on: 12/15/2008 7:03 PM by Author "Darrell B."
in the forum "RC Warbirds and Warplanes"
http://www.rcuniverse.com/forum/fb.asp?m=8249135
RE: P-39 Airacobra anything thread!
Here are a few quick pics of my Jim Pepino P-39 that I am finishing up this winter for next spring. 80 inch wing with an AXI 5345/14 outrunner turning a 20x12 prop on 12s lipos. I'm still finishing up the covering, ailerons, flaps,ets. I still need to pull a canope![:o]
Posted on: 12/15/2008 6:11 PM by Author "Darrell B."
in the forum "RC Warbirds and Warplanes"
http://www.rcuniverse.com/forum/fb.asp?m=8248980
RE: Top Flite Giant P-51 Conversion
! Darrell B.
Posted on: 11/15/2008 10:33 AM by Author "Darrell B."
in the forum "Glow to Electric Conversions"
http://www.rcuniverse.com/forum/fb.asp?m=8149667
RE: Saab J-21
Peso, Did you ever finish your J21? If so, did you ever do anything along the lines of producing fuselages or plans for the wing and tail? Thanks, Darrell
Posted on: 10/29/2008 4:15 PM by Author "Darrell B."
in the forum "RC Scale Aircraft"
http://www.rcuniverse.com/forum/fb.asp?m=8096343
Megapower charger won't charge.
some tips. Thanks, Darrell B.
Posted on: 10/21/2008 9:20 AM by Author "Darrell B."
in the forum "E-Flight Power Sources"
http://www.rcuniverse.com/forum/fb.asp?m=8069686
RE: Top Flite Giant P-51 Conversion
Has anyone tried any of the 4 blade props from Zinger? They look like they would work well and weigh much less than the Solo props. The only down side is that you have to choose which pitch you want, and can't just change it at will? Thanks, Darrell B.
Posted on: 10/17/2008 6:11 PM by Author "Darrell B."
in the forum "Glow to Electric Conversions"
http://www.rcuniverse.com/forum/fb.asp?m=8058519
RE: TF 1/5 Scale P-51 ARF Assembly Thread
it into the opening and you should be all set. Good Luck, Darrell B.
Posted on: 10/17/2008 6:07 PM by Author "Darrell B."
in the forum "RC Warbirds and Warplanes"
http://www.rcuniverse.com/forum/fb.asp?m=8058505
RE: CMP Kits – Problems and Solutions
I have the CMP AT-6 Texan, and am concerned about the elevator linkages that came with it. Has anyone had problems with flutter on the elevator using the linkages that came with the kit? What are some of the sloutions to solve this problem. I am hesitant to fly this plane like it is, and don't want to put it in on the first flight due to a flutter problem. Thanks, Darrell B
Posted on: 9/5/2008 12:03 PM by Author "Darrell B."
in the forum "ARF or RTF"
http://www.rcuniverse.com/forum/fb.asp?m=7922814
RE: Top Flite Giant P-51 Conversion
Ron, Check the Hobby Lobby site or Tower Hobbies for the specs on the AXI motors, or you could go to the AXI site at www.modelmotors.cz . Darrell
Posted on: 8/29/2008 7:03 PM by Author "Darrell B."
in the forum "Glow to Electric Conversions"
http://www.rcuniverse.com/forum/fb.asp?m=7900109
RE: Top Flite Giant P-51 Conversion
. Good luck and best wishes, Darrell
Posted on: 8/28/2008 8:03 PM by Author "Darrell B."
in the forum "Glow to Electric Conversions"
http://www.rcuniverse.com/forum/fb.asp?m=7896791
RE: Top Flite Giant P-51 Conversion
with them. I hope that all made perfect sense.[:D] Darrell
Posted on: 4/1/2008 4:07 PM by Author "Darrell B."
in the forum "Glow to Electric Conversions"
http://www.rcuniverse.com/forum/fb.asp?m=7317344
RE: Top Flite Giant P-51 Conversion
, Darrell
Posted on: 3/28/2008 9:15 AM by Author "Darrell B."
in the forum "Glow to Electric Conversions"
http://www.rcuniverse.com/forum/fb.asp?m=7295243
RE: Top Flite Giant P-51 Conversion
that you are going to use if you go with the 16 wind. Darrell B.
Posted on: 3/26/2008 4:42 PM by Author "Darrell B."
in the forum "Glow to Electric Conversions"
http://www.rcuniverse.com/forum/fb.asp?m=7286732
RE: Improving the TF GS Mustang Cowl
count me in for one of these.
Posted on: 1/9/2008 9:42 PM by Author "Darrell B."
in the forum "RC Warbirds and Warplanes"
http://www.rcuniverse.com/forum/fb.asp?m=6882738
RE: FiberClassics P-51 now Comp-ARF P-51
I'm buying one of these, and am opting in on this thread for any future updates.
Posted on: 1/1/2008 4:23 PM by Author "Darrell B."
in the forum "RC Warbirds and Warplanes"
http://www.rcuniverse.com/forum/fb.asp?m=6837539
RE: Top Flite Giant P-51 Conversion
Ed, The AXI 5345 motors are made by Model Motors. Here is a link to their website.. http://www.modelmotors.cz/index.php?page=60&kategorie=5345 Just click on the motor that you would be interested in looking at, or go back to their main page to check out the other motors that they make. AXi motors have been the industry standard for outrunners for several years now. Darrell B
Posted on: 12/24/2007 10:45 AM by Author "Darrell B."
in the forum "Glow to Electric Conversions"
http://www.rcuniverse.com/forum/fb.asp?m=6798583
| 
