RE: Bob Cat Copy Falcon 120 Jet
I dont thave the $$$$ for a jet so am looking at going glow or gas to drive my Falcon, i seem to be collecting engines and I have a OS 160, 26CC gas and a Saito twin 182 (and am realy looking at getting a 200R3) I could sell an engine are 2 so I am open to suggestions an a different one... and could i install a Saito 200R3??
Posted on: 8/22/2012 10:22 AM by Author "Dc2LightTech" in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=11202233

i need an aluminum wing tube
i bent my YAK54's wing tube and i need a 25/32 or 0.781inch OD tube. anyone know where I can get one? ...26inches
Posted on: 8/20/2012 5:50 PM by Author "Dc2LightTech" in the forum "Crash & Rebuild"
http://www.rcuniverse.com/forum/fb.asp?m=11200223

i need an aluminum, wing tube
i have a yak 54 and i need a 25/32 or 0.781 inch OD tub,e 27 inch long any ideas as to who carries them?
Posted on: 8/20/2012 5:39 PM by Author "Dc2LightTech" in the forum "Composites Fabrication And Repair"
http://www.rcuniverse.com/forum/fb.asp?m=11200199

what is the best sim for a AW ultimate bip?
I have a JR 11x TX that I fly with my Ultimate 50cc Bip. any recommendations as to the best sim modeling for my plane?
Posted on: 2/24/2012 2:47 PM by Author "Dc2LightTech" in the forum "Aero-Works Support"
http://www.rcuniverse.com/forum/fb.asp?m=10974284

what is the best sim for a AW ultimate bip?
I have an ultimate 50cc Bip. what sim would be able to be used with 4 independent alerions?
Posted on: 2/24/2012 2:42 PM by Author "Dc2LightTech" in the forum "RC Flight Simulator Software"
http://www.rcuniverse.com/forum/fb.asp?m=10974279

what is best replacement for a UltraStick120?
I fly UltraSticks 40 and 60 and my dad is looking to get a 20cc gas plane. he fly's electrics but is joining a gas field and would like to get a 20cc plane. What planes would be a good choice that performs similar to a US 120?
Posted on: 2/20/2012 6:56 AM by Author "Dc2LightTech" in the forum "Giant Scale Aircraft - General"
http://www.rcuniverse.com/forum/fb.asp?m=10967281

RE: Introducing the new 50cc Ultimate 20-300
Its time to buy a new TX box. Im looking at the JR11X or Graupner HoTT MX-20, 12 Ch. any thoughts/ pros/ cons? Thanks!
Posted on: 10/5/2011 1:35 PM by Author "Dc2LightTech" in the forum "Aero-Works Support"
http://www.rcuniverse.com/forum/fb.asp?m=10750161

RE: Introducing the new 50cc Ultimate 20-300
It took 2 days of vaacation to put the plane together. the Rudder cables were a real pain! I had to stick my head into the fuse to see if they were crossed. it was not a clean install. what smoke pump should I use??? hope to be in the air in 3 weeks[:o]
Posted on: 5/8/2011 11:59 AM by Author "Dc2LightTech" in the forum "Aero-Works Support"
http://www.rcuniverse.com/forum/fb.asp?m=10508342

RE: Introducing the new 50cc Ultimate 20-300
my biplane came on Friday. I am looking to put HS 5645MG' in all location except rudder, for the rudder i'll use a HS7955. any commets? i am using a Futaba 9c
Posted on: 4/25/2011 12:22 PM by Author "Dc2LightTech" in the forum "Aero-Works Support"
http://www.rcuniverse.com/forum/fb.asp?m=10484124

RE: Introducing the new 50cc Ultimate 20-300
thanks for the jig info, the jig is in the mail! I have a futaba 9c (non 2.4GHz). is it time to upgrade? what are the options for power and control?
Posted on: 3/8/2011 9:11 AM by Author "Dc2LightTech" in the forum "Aero-Works Support"
http://www.rcuniverse.com/forum/fb.asp?m=10386679

RE: Introducing the new 50cc Ultimate 20-300
gasers are a bit new(normal plane is a ultra stick ) who is PSP?
Posted on: 3/7/2011 6:50 PM by Author "Dc2LightTech" in the forum "Aero-Works Support"
http://www.rcuniverse.com/forum/fb.asp?m=10385689

RE: Introducing the new 50cc Ultimate 20-300
I don't see a jig on the DA web page. do you know where I can get one?
Posted on: 3/7/2011 9:10 AM by Author "Dc2LightTech" in the forum "Aero-Works Support"
http://www.rcuniverse.com/forum/fb.asp?m=10384360

RE: Introducing the new 50cc Ultimate 20-300
My DA-60 just arrived and i need to drill out my prop. any make drilling jigs for the props?
Posted on: 3/7/2011 8:31 AM by Author "Dc2LightTech" in the forum "Aero-Works Support"
http://www.rcuniverse.com/forum/fb.asp?m=10384292

RE: how do i build a smoke muffler for a Saito 125?
thanks guys!
Posted on: 2/28/2011 12:52 PM by Author "Dc2LightTech" in the forum "Glow Engines"
http://www.rcuniverse.com/forum/fb.asp?m=10370016

how do i build a smoke muffler for a Saito 125?
I can not find a smoke muffler for my saito 125. any ideas on how to build one? its for my Edge 540 60. Thanks
Posted on: 2/28/2011 8:57 AM by Author "Dc2LightTech" in the forum "Glow Engines"
http://www.rcuniverse.com/forum/fb.asp?m=10369583

RE: Introducing the new 50cc Ultimate 20-300
the planes are on back order[:@], but that gives me time to get all the other parts set. I am (at this time) going with the DA60 with smoke. I have a futaba system so do I go with 6v or 7.4V servoes?
Posted on: 2/22/2011 4:59 AM by Author "Dc2LightTech" in the forum "Aero-Works Support"
http://www.rcuniverse.com/forum/fb.asp?m=10354795

RE: Introducing the new 50cc Ultimate 20-300
I'm getting a new car (HHR) to fit more planes and I could use some advice on engine selection for the U 20-300. I want good smoke and vertical performance and good sound. is the Saito 57cc Gas Twin Engine 4-Stroke a good fit?. I'd like to see the rockers sticking out on the sides.... thanks, Philip
Posted on: 2/21/2011 6:58 AM by Author "Dc2LightTech" in the forum "Aero-Works Support"
http://www.rcuniverse.com/forum/fb.asp?m=10352337

RE: U Can Do 3D
I have a Edge 540 60 under the tree but HobbyTown messed up the order and I dont have a motor[:@] I was ordering a Saito 125A. Is this the way to go or should I use a different motor? I am sticking with glow and 4stroke...
Posted on: 12/21/2010 12:27 PM by Author "Dc2LightTech" in the forum "3D Flying!"
http://www.rcuniverse.com/forum/fb.asp?m=10210031

RE: need new servios for new Edge 540 60
and now to to motor...hobbie town screwed up the motor order so I am open to getting a diferent motor ... your ideas are welcome... 4 stroke glow only pls
Posted on: 12/21/2010 11:46 AM by Author "Dc2LightTech" in the forum "3D Flying!"
http://www.rcuniverse.com/forum/fb.asp?m=10209950

what servo to use with my 9C on my my Edge 540 60
I have a 9C and a synthesized RX module. I need to get servos for my new Edge 540 60, with a Saito 1.25A. can i use digital servos? what is the fastest response that the 9C can drive them at?
Posted on: 12/19/2010 12:41 PM by Author "Dc2LightTech" in the forum "Futaba Radios Direct support forum"
http://www.rcuniverse.com/forum/fb.asp?m=10206456

need new servios for new Edge 540 60
I am getting an Edge 540 60 and a S1.125A. I fly with a Futaba 9c what servios would you recomend? I have been flying an ultrastick for years and its time to upgrade.[:D]
Posted on: 12/15/2010 1:25 PM by Author "Dc2LightTech" in the forum "3D Flying!"
http://www.rcuniverse.com/forum/fb.asp?m=10199195

RE: Official F27 Stryker Part 8: Beginners to Custom Darkness
After I finish my catapult I will be starting my next Stryker. Is there a MPH /Watts rule of thumb? 80mph Watts? 100mph Watts? 120mph Watts?...
Posted on: 2/25/2010 2:08 PM by Author "Dc2LightTech" in the forum "Park Flyers & Backyard Flyers"
http://www.rcuniverse.com/forum/fb.asp?m=9534874

RE: Official F27 Stryker Part 8: Beginners to Custom Darkness
Hi all, I won a Neumotor at the Arizona Electric Fly. It is a 1110/1.5Y/3.2 3000KV Rm0.013 1KW I have 3s and a 5s LipPos.. no desire to go over 130mph. is this a good motor? thanks.
Posted on: 2/18/2010 9:12 PM by Author "Dc2LightTech" in the forum "Park Flyers & Backyard Flyers"
http://www.rcuniverse.com/forum/fb.asp?m=9516275

RE: Official F27 Stryker Part 8: Beginners to Custom Darkness
The scorpion ESC's have an option that at Low Voltage they emmit a tone (modulate the prop) without cuting the power.
Posted on: 8/11/2009 8:30 AM by Author "Dc2LightTech" in the forum "Park Flyers & Backyard Flyers"
http://www.rcuniverse.com/forum/fb.asp?m=9007137

RE: Official F27 Stryker Part 8: Beginners to Custom Darkness
I have about a 60% success rate at hand launching so I am designing a smaller car portable catapult before I finish the next Stryker. I can not get on the stick fast enough to keep it out of the ground. when I fly 5 cells + 6 oz motor I do not want to hand launch.
Posted on: 8/4/2009 3:58 PM by Author "Dc2LightTech" in the forum "Park Flyers & Backyard Flyers"
http://www.rcuniverse.com/forum/fb.asp?m=8989726

RE: Official F27 Stryker Part 8: Beginners to Custom Darkness
Mopar asked me:Have you done anything since our last PM ? yea, I had my daughter out flying with me and I wanted her to get some pics of my stryker so I had it at about 15 feet , 75% power doing hard turns. I did about 3 figure 8's, was going to roll out of my right turn and went right into the deck. It must have been doing 60mph. only lost the nose! super glued it back on and it's still flying. I need to replace one push rod as it is a bit curved. total damage was the ESC broke the tie wraps, one of the wires from my scorpion broke, bent a push rode and the nose broke off. if that had been one of my gassers it've cost me $150. it is amazing how durable the stryker is! I have the bent CF rod and Bass wood elavons as the only mod to the frame.
Posted on: 7/28/2009 1:23 PM by Author "Dc2LightTech" in the forum "Park Flyers & Backyard Flyers"
http://www.rcuniverse.com/forum/fb.asp?m=8970874

RE: Official F27 Stryker Part 8: Beginners to Custom Darkness
I used nichrome wire from a model rocket engine wire to melt the foam and then set the CF tube in the cutout and then checked that the wing was not bent and then used epoxy with micro balls to set it in place. the next time I do this I will but the bass wood on the trailing edge first to help keep the wing from bending
Posted on: 6/26/2009 9:43 AM by Author "Dc2LightTech" in the forum "Park Flyers & Backyard Flyers"
http://www.rcuniverse.com/forum/fb.asp?m=8882509

RE: Official F27 Stryker Part 8: Beginners to Custom Darkness
I agree, I would be glad to add a volt meter/current meter to the traveling motor if it goes to someone that does not have a curent meter...
Posted on: 6/23/2009 2:43 PM by Author "Dc2LightTech" in the forum "Park Flyers & Backyard Flyers"
http://www.rcuniverse.com/forum/fb.asp?m=8874407

RE: Official F27 Stryker Part 8: Beginners to Custom Darkness
"We will have the "Traveling Motor" idea in full swing very soon." should we call this the brotherhood of the traveling motors (G)?
Posted on: 6/23/2009 12:17 PM by Author "Dc2LightTech" in the forum "Park Flyers & Backyard Flyers"
http://www.rcuniverse.com/forum/fb.asp?m=8874106

RE: F27 STRYKER Part 7 : The Basics To The Darkest of Dark
Balance issue solved: I cut the excess motor shaft and prop adapter off[X(]
Posted on: 6/19/2009 3:30 PM by Author "Dc2LightTech" in the forum "Park Flyers & Backyard Flyers"
http://www.rcuniverse.com/forum/fb.asp?m=8865144