To whom it may concern
I wanted to make sure "Paul" from your telephone tech support, gets a pat on the back for a job well done. Spoke w/ him a couple of minutes ago, and am very satisfied with his professionalism, and thoroughness. I fear my parts request will be in vain, but am still holding out hope. On a side note, is the "parts request" thread still in use? I have posted a couple of requests, that seem to have fallen on deaf ears. I hope at least someone from Nitroplanes reads this! Jeff D.
Posted on: 7/13/2010 5:21 PM by Author "Drezed" in the forum "NitroModels Support"
http://www.rcuniverse.com/forum/fb.asp?m=9862915

RE: NITROMODELS REPLACEMENT PARTS REQUEST_Post Here
I am looking for the main wing set for the FMS Rafale ( www.nitroplanes.com/rafale-edf-rc-jet.html ). I've had the plane for awhile, so I don't have the order#. Thanks in advance Jeff
Posted on: 7/11/2010 12:49 PM by Author "Drezed" in the forum "NitroModels Support"
http://www.rcuniverse.com/forum/fb.asp?m=9857801

RE: a-10 fan units
If the fans you have are the brushed motor type, you may not be able to get them off. The impellers on these fans are "pressed" on to the shaft, and won't come off w/out a fight. Bad news is, even if you do get them off they typically can't be used in a "brushless" application. I would suggest buying new EDF units, as well as new motors. The 50mm(or 55mm, measure your fans first!) EDFs from GWS are a direct swap, as your A-10 is a copy of their desgn. Don't forget you will also need 2 brushless ESC's(speed controllers) , the brushed speed controllers are not compatible, and a bigger battery(LiPo). Good luck, and happy flying! Jeff
Posted on: 7/10/2010 9:18 AM by Author "Drezed" in the forum "NitroModels Support"
http://www.rcuniverse.com/forum/fb.asp?m=9855801

RE: NITROMODELS REPLACEMENT PARTS REQUEST_Post Here
Is it possible to purchase the landing gear mounts used on the "Airfield/FMS" planes (I am in need of the retaining clips)? Thank you in advance, Jeff
Posted on: 3/20/2010 12:09 AM by Author "Drezed" in the forum "NitroModels Support"
http://www.rcuniverse.com/forum/fb.asp?m=9596688

RE: Lipo C rates...
You are correct, in that the "C" rating is the discharge rating. It is the amount of amps a battery can discharge continuously , To get the max continuous rate, multiply the "C" rate times the capacity. For example 2200maH(milliamp hour) battery, with a 20 "C" rating will produce 44000 milliamp continuous, or 44amps. Of course at that rate, the battery would be depleted in around 3 minutes!
Posted on: 10/24/2009 12:28 AM by Author "Drezed" in the forum "NitroModels Support"
http://www.rcuniverse.com/forum/fb.asp?m=9197599

RE: NITROMODELS REPLACEMENT PARTS REQUEST_Post Here
Thanks John! PM me for any further information required. Jeff
Posted on: 10/24/2009 12:01 AM by Author "Drezed" in the forum "NitroModels Support"
http://www.rcuniverse.com/forum/fb.asp?m=9197541

RE: NITROMODELS REPLACEMENT PARTS REQUEST_Post Here
order# yhst-17210252890263-90904 Web page: www.nitroplanes.com/rafale-edf-rc-jet.html I am in need of the rudder/steering servo control arm. It is installed on the servo in the cockpit. It can partially be seen in the pics on the web page. Thanks in advance!
Posted on: 10/14/2009 12:57 PM by Author "Drezed" in the forum "NitroModels Support"
http://www.rcuniverse.com/forum/fb.asp?m=9172713

RE: DAMAGE SHIPPING/MISSING PARTS ISSUES____Post here
Part arrived, issue resolved. Big thanks to NitroPlanes, an especially "Cheng" whom I spoke w/ on phone. Great Job!! Jeff D.
Posted on: 9/3/2009 4:24 PM by Author "Drezed" in the forum "NitroModels Support"
http://www.rcuniverse.com/forum/fb.asp?m=9064303