|
RE: Weatronics....considering a change .is it worth the investment?
ORIGINAL: rhklenke [quote] Let me turn it around and ask you what the Futaba system can not do that you wished it did? [/quote] I have been using it for several years in a 12FG. I think the single most value add is the real-time logging system. Although not perfect, it allow you to check for RF quality, get alarms for voltage (Tx,RX) and quality of signal. Maybe the 18MZ can do some of that, not sure. I believe other system are catching-up, so its a matter of time.. Lets see what they do next. and yes, still waiting for the English voice file [:@]
Posted on: 9/16/2012 12:48 PM by Author "Edgar Perez"
in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=11230158
RE: Weatronic 2.4 RF diagnostic tool
[quote]ORIGINAL: luv2flyrc I haven't read many good reports from fellows running Wea with Futaba and the Wea module apparently requires a Euro coded Futaba transmitter anyway. [/quote] Several years of 12 channel, good service of Wea with a Futaba 12FG.
Posted on: 9/14/2012 5:48 PM by Author "Edgar Perez"
in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=11228785
RE: Good sport jet for a fair price ?
[quote]ORIGINAL: Square Nozzle Consider the all composite Reaction from Bruce Tharpe Engineering. It's on sale now for $1295 which includes shipping. [/quote] +1
Posted on: 8/25/2012 4:38 AM by Author "Edgar Perez"
in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=11205288
Wanted: Scorpion Right Wing
Looking to repair my friend's Aviation Design Scorpion. Any color. If you have one, please PM me. Thanks!
Posted on: 8/22/2012 5:12 PM by Author "Edgar Perez"
in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=11202639
RE: Ultra Flash Bypass and inlet fit
alignment significantly off on mine... this caused the wing not to seat properly.. just slide the inlet... easy solve Don't have a photo, as the plane is at my friend house being repaired.
Posted on: 8/19/2012 5:09 AM by Author "Edgar Perez"
in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=11198497
RE: Amp Draw on servos???
I think that's fine. Seems consistent with other planes I have..
Posted on: 8/10/2012 5:03 PM by Author "Edgar Perez"
in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=11188737
RE: Redundant RX packs are they overkill?
[quote]ORIGINAL: hotspot 01 Had a mate just recently save a Reaction X on the ground the reciever failed to bind discovered a faulty wire coming from the only battery he had on board. Ok fault was found think two packs would have hidden the problem but fortunate the problem was discovered on the ground. [/quote] when charging at the end of flying they should take similar charges. Otherwise you need to check what's going on.
Posted on: 8/5/2012 8:09 PM by Author "Edgar Perez"
in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=11182372
RE: New Gear System Failsafe.....
Make it so that it will not allow the retracts to go up if the retract switch is in the 'up' position when turning the radio on.
Posted on: 7/23/2012 2:40 PM by Author "Edgar Perez"
in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=11166252
RE: Looking to buy p180 or mamouth
Its getting tiresome that the jetcat fans boys take any thread as an opportunity to do cheap shots againts JetCentral[:@][:'(]
Posted on: 7/17/2012 4:58 AM by Author "Edgar Perez"
in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=11158396
RE: Weatronic 2.4 RF diagnostic tool
[quote]ORIGINAL: STAN-CAUSSEL GENERAL QUESTION : Who is using a FUTABA T12FG with a WEATRONIC 2.4 Tx Modul ? [/quote] Im using that combination, with the DV3 Tx Modul. No issues, but still using with with an earlier firmware (2.33 I think)
Posted on: 6/20/2012 8:26 AM by Author "Edgar Perez"
in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=11125139
RE: Weatronic 2.4 RF diagnostic tool
No issue with 2.33... I have not updated in a long while
Posted on: 6/10/2012 5:33 PM by Author "Edgar Perez"
in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=11113690
RE: volz servos
I changed mine to hitec thin wing ones. It was not too bad, as I kept the original servo cables..
Posted on: 6/7/2012 6:30 AM by Author "Edgar Perez"
in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=11109854
RE: LiFe or Lipo with regulator??
Dual life also
Posted on: 5/29/2012 7:02 PM by Author "Edgar Perez"
in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=11099277
RE: Help us save our flying field - sign this petition
Signed from Puerto Rico
Posted on: 5/17/2012 9:56 AM by Author "Edgar Perez"
in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=11084474
RE: C-ARF Ultra Flash build Thread + Video
keep the turbine at the right distance from the pipe. Move the white ducting forward to create more space around the turbine.
Posted on: 5/14/2012 5:56 PM by Author "Edgar Perez"
in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=11080845
RE: Fadec data terminal help?
I have an old one that only works if I remove the faceplate. Basically the buttons don't click down with the faceplate on. Works fine without it.
Posted on: 5/14/2012 1:30 PM by Author "Edgar Perez"
in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=11080543
RE: Hydraulic kit from Hobby King anyone use these
Seems they are selling the [link=http://umstech.in/view_products.php?cat=Landing%20Gears]UMS Technologies system[/link]
Posted on: 5/9/2012 6:16 AM by Author "Edgar Perez"
in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=11074102
RE: TOP GUN 2012 Getting ready and....
Felicidades!
Posted on: 5/9/2012 6:13 AM by Author "Edgar Perez"
in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=11074096
RE: Reaction ARF - PST/BTE All-Composite Sport Jet
[quote]ORIGINAL: steve2972 I`m just finishing my ReactionX,(P100,Electron Electric Retracts/Pro-link gear).This is my second jet but the first that I have built.Just wondered how you go about checking the CG as its too large/heavy to flip over and use your fingers[:-]?Any help/advice would be appreciated. Thanks Steve [/quote] I sometime use an inverted chair. Put some foam on the two higher legs and they act as your finger. Otherwise, do a search here for the options were you hang the plane by the target CG.
Posted on: 5/2/2012 4:52 AM by Author "Edgar Perez"
in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=11065169
RE: Pros and Cons using a ByPass in a turbine installation
I will think its harder to monitor for a wet start with a bypass. Its being claimed that a bypass will give you higher top end speed, but without it you get better low end thrust.
Posted on: 4/28/2012 3:19 AM by Author "Edgar Perez"
in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=11059835
RE: Big thanks to Jet Central!
[quote]ORIGINAL: gunradd The part that blows me away is that I got a used turbine that they dont even make anymore and they still stepped up and gave me great support. [/quote] Got a better one. Getting advice and support from Eric on a turbine that is not even JetCentral, but used the same ECU!
Posted on: 4/18/2012 6:14 AM by Author "Edgar Perez"
in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=11046947
RE: ASM B-17G Flying Fortress ARF (120
Nice!
Posted on: 4/12/2012 7:06 PM by Author "Edgar Perez"
in the forum "RC Warbirds and Warplanes"
http://www.rcuniverse.com/forum/fb.asp?m=11039687
RE: Troubleshooting ECU - Whats next?
Thanks guys.. will check. (yes, tried other glow plugs)
Posted on: 4/12/2012 6:59 AM by Author "Edgar Perez"
in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=11038803
Troubleshooting ECU - Whats next?
Hello All, After the original simjet ECU malfunctioned for my 2300, I changed the ECU to a Xicoy AU-354. This is the old, long, rectangle box ECU. After many year of use, it now do not energize the glow plug during the start. It does sucessfully pass and detect if the glow plug connectivity is there. I soldered a new multiplex connector in case that was the issue. No suck luck. Is there anything else I can check before declaring it dead? Thanks
Posted on: 4/11/2012 4:01 PM by Author "Edgar Perez"
in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=11038128
RE: Weatronic 2.4 RF diagnostic tool
Thanks[:D]
Posted on: 4/10/2012 12:39 PM by Author "Edgar Perez"
in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=11036359
RE: Weatronic 2.4 RF diagnostic tool
Can someone comment on the purpose of the MUX Box?
Posted on: 4/10/2012 6:43 AM by Author "Edgar Perez"
in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=11035854
RE: First RC Jet suggestion
An exposed turbine is a good feature for a beginner, as it mitigates damage in case of wet starts. Not scale, but an PST Reaction is a great starter jet.
Posted on: 3/31/2012 3:58 PM by Author "Edgar Perez"
in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=11022768
RE: Changing to A123's
Electrodynamics
Posted on: 3/28/2012 6:04 PM by Author "Edgar Perez"
in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=11019235
RE: Sitting for a year or more
The bee has very small injectors. See if you can verify none are clogged (maybe looking at in darkness).
Posted on: 3/19/2012 7:39 AM by Author "Edgar Perez"
in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=11006812
RE: Skymaster L-39 Albatros experiences
Do reinforce the landing gear mounts.. the strut setup creates a very high stress if you land (or crash land[:D]) too fast... ask me how I know[:@]
Posted on: 3/17/2012 7:55 AM by Author "Edgar Perez"
in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=11003902
| 
