|
RE: Jetcat P20 SE - what airframe?
://www.jet-teng.com/ Kind regards, Eric
Posted on: 8/11/2012 1:21 AM by Author "Eric Banner"
in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=11189045
RE: norvel 25
The broken lug is one of the two cast lugs, on the muffler body, used to secure the muffler to the engine. But thanks for the reply qwertypemdas. Eric
Posted on: 8/24/2009 2:47 PM by Author "Eric Banner"
in the forum "Glow Engines"
http://www.rcuniverse.com/forum/fb.asp?m=9040855
RE: norvel 25
Hi Managed to break a fixing lug off the muffler on my .25 BB R/C Revlite. Can anyone advise on another manufacturers muffler which will fit the Norvel? TIA Eric
Posted on: 8/24/2009 5:24 AM by Author "Eric Banner"
in the forum "Glow Engines"
http://www.rcuniverse.com/forum/fb.asp?m=9039745
RE: Jetlegend T45
[quote]ORIGINAL: wing13z my new wing hes been broken, so i wont to try with the old wing. [/quote] Hi wing13z, My advice would be not to try the old wing. If you do, you stand a real good chance of also needing a new fus! Wash-in ain't good news. Kind regards, Eric
Posted on: 8/20/2008 2:09 PM by Author "Eric Banner"
in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=7866648
RE: 25 size bobcat with Lambert micro turbine
I've set my MW44 at 6 Deg. http://www.rcuniverse.com/forum/fb.asp?m=6275678&key= Believe John Wright and Dave Wilde used 5 Deg. Eric [quote]ORIGINAL: csetting New 25 size Bobcat with lambert turbine. My question is what thrust angle are you guys putting your motors at on the nitro models Bobcats. [/quote]
Posted on: 12/30/2007 4:21 AM by Author "Eric Banner"
in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=6824994
RE: 12lbs turbine
to need it. HTH Regards, Eric [quote]ORIGINAL: jetint8ke thanks joeflyer, the end of next month ,i am
Posted on: 12/24/2007 3:53 PM by Author "Eric Banner"
in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=6799715
RE: Nitro models pusher Bobcat?
Hi Stick Jammer, My solution was to cut the elevator in half! Each elevator servo then can't interfere with its partner. I did this mainly to ensure that the two elevator servos were not fighting each other at any elevator position. Seams to work OK. http://www.youtube.com/watch?v=OucKVUMAzKQ Eric [quote]ORIGINAL: Stick Jammer It would really surprise me if the "working" servo
Posted on: 11/11/2007 1:49 PM by Author "Eric Banner"
in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=6609727
RE: Jet Leged 1/8 f 16
Hi fw190pilot, As Jeff has commented the bearer spacing is a little on the narrow side for a P80. On the other hand to fit an MW54, Mk3 or SS requires the bearer gap reducing! Eric [quote]ORIGINAL: fw190pilot Will a p 80 fit in this plane? [/quote]
Posted on: 11/1/2007 12:15 PM by Author "Eric Banner"
in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=6567227
RE: P-60 or P-70 for JL T-45....Advice Please
Hi Mike, Of the two I would go with the P70. Given more freedom of choice it would be an MW54 Super Sport. Eric
Posted on: 10/22/2007 5:09 PM by Author "Eric Banner"
in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=6524273
RE: JL 39 1/6.5 Version
Hi Sandor, Where can we buy one in the UK, from Ali? Or would it be direct from yourself? Eric
Posted on: 10/13/2007 11:47 AM by Author "Eric Banner"
in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=6485094
RE: Nitro models pusher Bobcat?
Hi Jim, Ah, that's what I suspected the solution would be. Just being lazy looking for a quick fix... Best regards, Eric [quote]ORIGINAL: Jascat100 [quote]ORIGINAL: Eric Banner Hi guys... with any information to help in locating a replacement? Thanks, Eric Video of penultimate flight: http://www.youtube.com/watch?v=OucKVUMAzKQ [/quote] Eric. I also lost the canopy of mine despite lining
Posted on: 9/25/2007 3:59 PM by Author "Eric Banner"
in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=6412718
RE: Nitro models pusher Bobcat?
Hi guys, The canopy on my 50-size bobcat came off in flight yesterday. The canopy was completely destroyed but did not cause an appreciably trim change and I landed safely without further damage. Can anyone assist with any information to help in locating a replacement? Thanks, Eric Video of penultimate flight: http://www.youtube.com/watch?v=OucKVUMAzKQ
Posted on: 9/24/2007 2:37 PM by Author "Eric Banner"
in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=6408101
RE: Failure of spectrum AR9000 RX's..
[quote]ORIGINAL: GrayUK Eric...no old school tie in my book...I am an examiner for the BMFA and take it very seriously, I just think that people are kidding themselves if they believe.. 1) They know where 400 ft is for any size of model they are flying. 2) They have never broken the rule. ....Snip... of the CAA. CAA officials are known to attend the BMFA Nats. Kind regards, Eric
Posted on: 9/7/2007 2:56 PM by Author "Eric Banner"
in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=6339211
RE: Failure of spectrum AR9000 RX's..
; test or LMA equivalent. Or was the old school tie involved... Eric
Posted on: 9/7/2007 1:19 PM by Author "Eric Banner"
in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=6338930
RE: Ali & Dave Stephens at the British Nationals...
[quote]ORIGINAL: The boys Back ....... and as for the bobcat, i still think my bandit is faster!! [:-] Dave [/quote] Isn't the speed record held by a %*£der? Surprised that you and Ali have allowed this unacceptable state of affairs to exist for so long...[sm=biggrin.gif] Eric
Posted on: 8/28/2007 7:01 AM by Author "Eric Banner"
in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=6297126
RE: Fei Bao Hawk
the premium. Still, the excitement keeps us all alive! Kind regards, Eric
Posted on: 8/28/2007 6:53 AM by Author "Eric Banner"
in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=6297108
RE: Fei Bao Hawk
Sandor is THE MAN!!! [8|] E [/quote] Yeah cheers Sandor, must listen harder next time [:D] Cheers Steve [/quote] [/quote] so that 180mm wasnt so bad after now was it?[:-] good to see you fly. [/quote]
Posted on: 8/28/2007 4:46 AM by Author "Eric Banner"
in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=6296940
RE: Ali & Dave Stephens at the British Nationals...
Did you see Ali flying his Booster powered Bobcat? Clocked at 297 mph, awesome. Eric
Posted on: 8/26/2007 4:09 PM by Author "Eric Banner"
in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=6289429
RE: Fei Bao Hawk
Attached are a few photos from Steve's Hawk maiden flight. Unfortunately I didn't get any shots of the landing... too much going on! Eric
Posted on: 8/26/2007 3:41 PM by Author "Eric Banner"
in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=6289342
RE: Which Hawk?
Happy to help, see you there Steve Eric [quote]ORIGINAL: stevo_m [quote]ORIGINAL: Eric Banner Hi Steve, You going to West R on Sunday? Eric [quote]ORIGINAL: stevo_m .... I'll let you know how they fly this w/end when I give mine the big maiden!! Steve [/quote] [/quote] Sure will be. I'll get you to glance an eye over her if you could. Then perhaps assist in the test flight?? Steve
Posted on: 8/24/2007 8:32 AM by Author "Eric Banner"
in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=6280279
RE: Which Hawk?
Hi Steve, You going to West R on Sunday? Eric [quote]ORIGINAL: stevo_m .... I'll let you know how they fly this w/end when I give mine the big maiden!! Steve [/quote]
Posted on: 8/23/2007 6:07 PM by Author "Eric Banner"
in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=6278082
RE: Nitro models pusher Bobcat?
Hi fw190pilot, My 44 gold is fitted at 6 deg relative to the airframe base plate. The nose does not pitch up at full stick, well, not that I've noticed anyway. 5 degs will be fine. Eric [quote]ORIGINAL: fw190pilot Question for guys that have fit turbines. How much down thrust on the engine? I was planning on 5 degrees. Does that sound about right? [/quote]
Posted on: 8/23/2007 4:38 AM by Author "Eric Banner"
in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=6275678
RE: Nitro models pusher Bobcat?
Hi opjose, Main reason is to prevent incinerating the horizontal stabiliser! Eric [quote]ORIGINAL: opjose Why so much down thrust? Does the nose pitch up that much at higher speeds? [/quote]
Posted on: 8/23/2007 4:33 AM by Author "Eric Banner"
in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=6275682
RE: Fei Bao Hawk
Steve, Does sandors 160 to 180 mm back equate to 30%-ish of ther root cord? Eric
Posted on: 8/21/2007 6:49 AM by Author "Eric Banner"
in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=6266364
RE: Fei Bao Hawk
flight. HTH, Eric [quote]ORIGINAL: stevo_m ... I see your looking at the CoG at 180mm. I have been
Posted on: 8/21/2007 4:46 AM by Author "Eric Banner"
in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=6266209
RE: Bob Cat Copy Falcon 120 Jet
Thanks for that jets2. It's a combination of plane/turbine that I quite fancy. What did your all-up dry weight turn out to be and how much fuel were you carrying? Regards, Eric [quote]ORIGINAL: jets2 HI, here is a video of my falcon 120 powered by a wren mw44 gold http://www.rcuvideos.com/item/PKL93DVKVYS1DKJ5 [/quote]
Posted on: 8/9/2007 5:22 PM by Author "Eric Banner"
in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=6217397
RE: Nitro models pusher Bobcat?
Hi Carlos, Thanks for the video. I did enjoy it. I had the first flight of my Bobcat today and had the max aileron movement set way too high. Breathing on the stick induced a “twinkle� roll, not good news for a first flight! What aileron movement have you set on your Bobcat? Regards, Eric [quote]ORIGINAL: WILDGAS Here my Bobcat in video, and some picture. I have a OS 55ax with Rossi pipe fron
Posted on: 8/5/2007 5:03 PM by Author "Eric Banner"
in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=6199777
RE: Bob Cat Copy Falcon 120 Jet
regards, Eric [quote]ORIGINAL: noahb Well, I have yet to order my turbine but I was thinking the Artes
Posted on: 8/5/2007 3:37 PM by Author "Eric Banner"
in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=6199497
RE: Let Legands F-16 Kit Build
Hi drdoom, As you will see from the (not very good) photos I cut a little of the nose wheel cassette away to accommodate the door cylinder. My F16 at 17.5lb dry is fast with the Wren 54 MK3 at 14.5lbf. Yours with the P70 should be very interesting! Rgds, Eric [quote]ORIGINAL: drdoom I looked those over very well before I begain building. But you can never get too many ideas. I got the kit instead
Posted on: 7/31/2007 2:49 PM by Author "Eric Banner"
in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=6179547
RE: Let Legands F-16 Kit Build
Hi drdoom, Yes sure. Have to take one first though. In the mean time have you seen the photos by Lasse Palm? http://www.rcuniverse.com/forum/m_5822484/mpage_4/key_/tm.htm# Rgds, Eric [quote]ORIGINAL: drdoom ... Eric: Can you post a Pix of your nose cylinder? Please. [/quote]
Posted on: 7/31/2007 12:40 PM by Author "Eric Banner"
in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=6179096
| 
