|
RE: Magnum .52 4S great news
They are good about giving you a whole new engine if necessary, too. Ernie
Posted on: 11/19/2009 4:29 PM by Author "Ernie Misner"
in the forum "Glow Engines"
http://www.rcuniverse.com/forum/fb.asp?m=9265656
RE: New AVIASTAR 46 thread
Nearly all manufacturers carbs are drop-in fits to others. Luckily, they copy the origional OS dimemsions it appears. This goes for the larger size engines as well. Ernie
Posted on: 11/19/2009 4:28 PM by Author "Ernie Misner"
in the forum "Glow Engines"
http://www.rcuniverse.com/forum/fb.asp?m=9265653
RE: Welcome to Club SAITO !
Hi Dave, about when? was the Saito 50 still being produced? Thanks, Ernie
Posted on: 11/18/2009 4:23 PM by Author "Ernie Misner"
in the forum "Glow Engines"
http://www.rcuniverse.com/forum/fb.asp?m=9263355
RE: New OS 25AX
Thanks for the nice article and photos David! Those older SF engines are the best. I've had 2 of the .46's, both ringed. Ernie
Posted on: 11/18/2009 12:46 AM by Author "Ernie Misner"
in the forum "Glow Engines"
http://www.rcuniverse.com/forum/fb.asp?m=9261981
RE: Welcome to Club SAITO !
Charlie that is one clean P-51. Is it a top flight kit? Ernie
Posted on: 11/18/2009 12:43 AM by Author "Ernie Misner"
in the forum "Glow Engines"
http://www.rcuniverse.com/forum/fb.asp?m=9261976
RE: O.S 1.20AX Owners. Post your tach readings
Hi Erik and Flygilmore! Did you guys have to grind out the front of your cans and JB Weld in a short piece of aluminum tubing? Or did you find a type of can that already had threads or an opening that slips real tight over the mac's header pipe? I see Erik's is a beer can but I can't tell what kind of top it had on it. Thanks, Ernie
Posted on: 11/17/2009 4:09 AM by Author "Ernie Misner"
in the forum "Tachometer Readings"
http://www.rcuniverse.com/forum/fb.asp?m=9259598
RE: New OS 25AX
Have you tried 3 or 4 engines? Ernie
Posted on: 11/17/2009 2:44 AM by Author "Ernie Misner"
in the forum "Glow Engines"
http://www.rcuniverse.com/forum/fb.asp?m=9259553
RE: New AVIASTAR 46 thread
Has anyone put an OS carb on their .46's? My Magnum .46 runs great with an OS carb, older style, not rear mounted or swept back needle. Ernie
Posted on: 11/15/2009 8:41 PM by Author "Ernie Misner"
in the forum "Glow Engines"
http://www.rcuniverse.com/forum/fb.asp?m=9256232
RE: Tank foaming
Put a fuel filter in the line right before the engine somewhere. That helps to absorb any bubbles that do make it that far. Ernie
Posted on: 11/15/2009 8:30 PM by Author "Ernie Misner"
in the forum "OMP - Ohio Model Products Support Forum"
http://www.rcuniverse.com/forum/fb.asp?m=9256197
RE: 47
I used a hex-head steel bolt for joining the wings and found that a ball driver will angle it's way in there and tighten that bolt easily. Ernie
Posted on: 11/15/2009 8:29 PM by Author "Ernie Misner"
in the forum "OMP - Ohio Model Products Support Forum"
http://www.rcuniverse.com/forum/fb.asp?m=9256196
RE: Picture of my 47
hovers and spins great. I did use the 2 1/2 degree shims under the engine mount too. Ernie
Posted on: 11/15/2009 8:22 PM by Author "Ernie Misner"
in the forum "Profile and Fun Flying Planes"
http://www.rcuniverse.com/forum/fb.asp?m=9256176
RE: New OS 25AX
Nice video. You do know how to tune 'em! Ernie
Posted on: 11/15/2009 2:51 AM by Author "Ernie Misner"
in the forum "Glow Engines"
http://www.rcuniverse.com/forum/fb.asp?m=9254654
RE: Magnum 91 two stroke power possibilities
That MCP setup might be a bit lighter though, even lighter than the Tower muffler. It tends to get the CG back some too, if that is needed. Ernie
Posted on: 11/13/2009 4:28 PM by Author "Ernie Misner"
in the forum "Glow Engines"
http://www.rcuniverse.com/forum/fb.asp?m=9251506
RE: New AVIASTAR 46 thread
Hopefully more break in on the engine with extra pinch will do the trick. Ideally you would put in on a test stand and run that baby WOT for a few tankfuls, not 4-cycling, but in a slightly rich 2-cycle adjustment. Running it slow or cool with that excess pinch is asking to actually wear it out. Keep us posted, Ernie
Posted on: 11/13/2009 4:21 PM by Author "Ernie Misner"
in the forum "Glow Engines"
http://www.rcuniverse.com/forum/fb.asp?m=9251490
RE: MACS ONE PIECE MUFFLER-OS55x(#6720)
it could run any cleaner? Thanks, Ernie
Posted on: 11/4/2009 4:05 PM by Author "Ernie Misner"
in the forum "Glow Engines"
http://www.rcuniverse.com/forum/fb.asp?m=9228115
RE: K&B 61 What do I have here?
Has anyone here on this forum had their K&B .61 ported by Clarence Lee? In his add he states that your engine must be nearly new. Of these 2 used ones I have here, I would probably have to buy a new piston, ring, and liner if Mecoa has them I am thinking? Thanks, Ernie
Posted on: 11/4/2009 4:01 PM by Author "Ernie Misner"
in the forum "Glow Engines"
http://www.rcuniverse.com/forum/fb.asp?m=9228103
RE: New design Saito 82
Personally I was hoping Saito would come up with something like what OS has done to eliminate the messy crankcase breather tube. My .82 runs flawlessly though. Ernie
Posted on: 10/28/2009 4:36 PM by Author "Ernie Misner"
in the forum "Glow Engines"
http://www.rcuniverse.com/forum/fb.asp?m=9209875
RE: New OS 25AX
With multi engine models it might be a safety backup system to insure that none of the engines will dead stick when chopping the throttle. Of course there would have to be a very fine mechanical tuning of the linkages to avoid servo binding. Ernie
Posted on: 10/28/2009 4:29 PM by Author "Ernie Misner"
in the forum "Glow Engines"
http://www.rcuniverse.com/forum/fb.asp?m=9209848
RE: jen 37 new toy
Wow, this is a very old thread, from '05 I think. We have the new OS 32 (or is it a 37) AX now but it's bound to cost more... Ernie
Posted on: 10/20/2009 3:08 AM by Author "Ernie Misner"
in the forum "Glow Engines"
http://www.rcuniverse.com/forum/fb.asp?m=9187359
RE: Using 6V AAA NiMh Packs ?
Jerry, are the Duralites an A123 type of battery? Are you using any regulator with them? Thanks, Ernie
Posted on: 10/15/2009 4:11 PM by Author "Ernie Misner"
in the forum "Profile and Fun Flying Planes"
http://www.rcuniverse.com/forum/fb.asp?m=9175896
RE: Using 6V AAA NiMh Packs ?
I'm using the green, Sanyo, 750mah AAA batteries on my 5 cell packs for the 40 size profiles....... any better AAA's than that???? Thanks, Ernie
Posted on: 10/14/2009 4:33 PM by Author "Ernie Misner"
in the forum "Profile and Fun Flying Planes"
http://www.rcuniverse.com/forum/fb.asp?m=9173229
RE: Flat Spinnnnnnnnnnnnnn
Cool little scale there on your bench with a hook on it. Is that for fishing origionally? Ernie
Posted on: 10/12/2009 4:32 PM by Author "Ernie Misner"
in the forum "Profile and Fun Flying Planes"
http://www.rcuniverse.com/forum/fb.asp?m=9167251
RE: Magic owners thread
Hi Stickdude, it's you and me but that's okay! Maybe others will hop back in. I'm going to check out that carbon gear for the Somethin' Extra just for the heck of it anyway. I don't have a Magic yet but if they're still $99 at Hobby People I might get one soon! Ernie
Posted on: 10/12/2009 3:25 AM by Author "Ernie Misner"
in the forum "Profile and Fun Flying Planes"
http://www.rcuniverse.com/forum/fb.asp?m=9165833
RE: Battery mounting methods in wing panel....
Rodney, just curious, what is the voltage on your a123 pack? Would that work with the Electron 6 Hitec rx's I have been using? Thanks, Ernie
Posted on: 10/12/2009 3:20 AM by Author "Ernie Misner"
in the forum "Profile and Fun Flying Planes"
http://www.rcuniverse.com/forum/fb.asp?m=9165831
RE: Using 6V AAA NiMh Packs ?
Thanks for the head's up about the digital servos and AAA packs. What would I notice happening if I used 2 digital servos, one on rudder and one on elevator on my 40 size profile plane and stayed with the 750mah AAA pack? Thanks, Ernie
Posted on: 10/12/2009 3:18 AM by Author "Ernie Misner"
in the forum "Profile and Fun Flying Planes"
http://www.rcuniverse.com/forum/fb.asp?m=9165826
RE: Battery mounting methods in wing panel....
Hi Gustof, we were origionally talking about larger glow powered jobs. Are you talking electric foamies? Ernie
Posted on: 10/10/2009 1:39 AM by Author "Ernie Misner"
in the forum "Profile and Fun Flying Planes"
http://www.rcuniverse.com/forum/fb.asp?m=9161021
RE: Flat Spinnnnnnnnnnnnnn
Are you guys using the stock wire landing gear, or what is better. Anyone have a link to something? Thanks, Ernie ..... oh, I am thinking of getting a V2 magic for my Webra 35 black head ringed engine. Anyone ever seen one of those?? Ernie
Posted on: 10/10/2009 1:38 AM by Author "Ernie Misner"
in the forum "Profile and Fun Flying Planes"
http://www.rcuniverse.com/forum/fb.asp?m=9161019
RE: New profile
Did you get the CNC machine to play with projects like this??? How much do they cost? Thanks, Ernie
Posted on: 10/10/2009 1:27 AM by Author "Ernie Misner"
in the forum "Profile and Fun Flying Planes"
http://www.rcuniverse.com/forum/fb.asp?m=9161009
RE: Picture of my 47
Mike, which light wood prop do you like on your 55AX's? Or also a suggestion for a Saito 82 wood prop. Thanks, Ernie
Posted on: 10/6/2009 4:34 PM by Author "Ernie Misner"
in the forum "Profile and Fun Flying Planes"
http://www.rcuniverse.com/forum/fb.asp?m=9151752
RE: Picture of my 47
The torque comes on smooth with the 4-stroke, not a problem and if you want to do torque rolls it just hangs there perfect with the 14" props. I think that's an advantage compared to the 13" prop I run on my OS 55AX. As I recall I was getting 10,000 rpms with the APC 14x4W prop and 200 more with the MA 14x6 Scimitar prop. They pull almost exactly the same though. Ernie
Posted on: 10/1/2009 4:30 PM by Author "Ernie Misner"
in the forum "Profile and Fun Flying Planes"
http://www.rcuniverse.com/forum/fb.asp?m=9139250
| 
