What is the brand name of this chinese 40 size nitro engine
Hello Guys Can anybody tell me the brand name of this 40 size model airplane nitro engine?
Posted on: 7/3/2012 1:02 AM by Author "Falcons Cuz" in the forum "Glow Engines"
http://www.rcuniverse.com/forum/fb.asp?m=11140896

How to reverse throtel direction on Futaba 9CAP radio for H-King 50 A ESC
Hello Guys I have brought a new H-KING 50A Fixed Wing Brushless Speed Controller and after reading instruction manual completely i was come to know that for any Futaba radio the throttle will work in reverse direction .So can any body tell me that how can i make this change? http://www.hobbyking.com/hobbyking/store/uh_viewItem.asp?idProduct=14873 Waiting for your reply Abdul Samad
Posted on: 12/4/2011 6:35 AM by Author "Falcons Cuz" in the forum "Brushed/Brushless motors, speed controls, gear drives"
http://www.rcuniverse.com/forum/fb.asp?m=10842390

Tillotson Carb Problem
Hello Guys I have brought a used Stihl chainsaw for conversion and it is around 56 cc engine and first of all i give it a test run and it works fine and the carb is sucking the fuel after that i have decided to start conversion and i started off by rebuilding the carb and it does have a Tillotson Carb on it so i opened every part of the carb and cleaned it with gas then i have reassembled it and put it again on the engine but then the engine does not start and i have noticed that the carb is not sucking the fuel and when i dip it in a transparent fuel bottle it was just giving pulses so can any body of you tell me that what is wrong with the carb waiting for your suggestions Abdul Samad
Posted on: 10/19/2011 11:02 PM by Author "Falcons Cuz" in the forum "Engine Conversions"
http://www.rcuniverse.com/forum/fb.asp?m=10774152

RE: shindaiwa saw EC7500 Conversion
Hello Guys Thanks for such early and usefull replies.Form the link given in Dirty_Vinylpusher post it is very clear that the engine is attached with the rest of the Saw so it is not usefull foe my project. if this saw will fulfill my needs i was going to built an rc car with it
Posted on: 6/27/2011 10:09 PM by Author "Falcons Cuz" in the forum "Off Topic Forum - Cars, Trucks, Buggies and more"
http://www.rcuniverse.com/forum/fb.asp?m=10595696

shindaiwa saw EC7500 Conversion
Hello Guys Can any body please tell me that what is the type of engines that is used to power this chainsaw?is it a short block engine or the crank case is attached with the rest of the chainsaw.Also tell me if any body of you have converted this chainsaw successfully or not Waiting for your suggestions Abdul Samad
Posted on: 6/27/2011 9:52 AM by Author "Falcons Cuz" in the forum "Off Topic Forum - Cars, Trucks, Buggies and more"
http://www.rcuniverse.com/forum/fb.asp?m=10594543

ABC Technology In Gas Engines
Hello Guys Last night i have being thinking that if we use ABC technology in gas engines then do they perform better then the stock once or there is problem with the temperature of the gas engines any suggestions about this silly question is warmly welcomed Waiting for your replies Falcons Cuz
Posted on: 1/5/2011 1:12 AM by Author "Falcons Cuz" in the forum "Gas Engines"
http://www.rcuniverse.com/forum/fb.asp?m=10240624

Sales Man Needed!!!!!!!!!!!!!!!!!!!!!
Hello Guys I am having a lot of Honda 26cc converted gas engines for sale about 60 engines .These are brand new four stroke engines from a Honda power tool and these engines are pending for patient so i got all these engines from a dealer of power tool engines i have sold a few of them but i do not have time to sell all of them so i want a sales man who will sell these engines for me and i will give $15 USD on the sale of each engine so if any one of you are interested to work for me then contact me at my email address.These are the discriptions of the engines RPM 5,000 Made Japan Propeller 17*8/18*6 Weight 2.5 kg Displacement 26 cc Horsepower 1.2 Cost $120 USD Ignition Transistorized magneto Type Four stroke Carburetor Walbro type Net torque 1.1 N.M at 5,000 RPMs If you guys want any other information about the engine then feel free to contact me at my email address or call me the following are a few pics of the converted motor falconsamad@gmail.com
Posted on: 11/3/2010 3:11 PM by Author "Falcons Cuz" in the forum "Employment, Jobs, Help Wanted in Radio Control Industry"
http://www.rcuniverse.com/forum/fb.asp?m=10113287

IDENTIFY THESE 26cc FOUR STROKE GAS ENGINES
Hello Guys i have brought two of these 26 cc four stroke gas engines which are converted for rc airplanes use from a person but he dont give me the informations about the brand of the engines and where these engines are Made (Japan or China) although quality wise these engines are excellent but before putting them into my rc airplane i want to know that either these engines are of Honda,Ryobi or any chinese company so guys please identify the brand of these engines from the following pics of the engines waiting for your replies
Posted on: 10/24/2010 5:41 AM by Author "Falcons Cuz" in the forum "Engine Conversions"
http://www.rcuniverse.com/forum/fb.asp?m=10089992

RE: HOW A CARB ON NITRO ENGINE WORKS
thanks again do you guys alos tell me that how two speed transmission shift the gears automatically in nitro cars how do it happens
Posted on: 9/12/2010 6:58 AM by Author "Falcons Cuz" in the forum "Car Nitro & Gas Engines"
http://www.rcuniverse.com/forum/fb.asp?m=9996148

RE: HOW A CARB ON NITRO ENGINE WORKS
thanks Anthoop can you also tell me that do the exhaust gases go into the fuel tank or not?
Posted on: 9/12/2010 6:33 AM by Author "Falcons Cuz" in the forum "Car Nitro & Gas Engines"
http://www.rcuniverse.com/forum/fb.asp?m=9996124

HOW A CARB ON NITRO ENGINE WORKS
Falcons Cuz
Posted on: 9/12/2010 5:18 AM by Author "Falcons Cuz" in the forum "Car Nitro & Gas Engines"
http://www.rcuniverse.com/forum/fb.asp?m=9996074

RE: INCREASING CC OF A TWO STROKE ENGINE!!!!!!!!!!!
Hi thanks for your reply also want to inform you that i also have two brand new pistons along with rings and wrist pins one of them is 40 mm and the other is 42 mm but the wall thickness along with the old piston is 5mm and if i put a 40 mm piston then it goes to 3mm wall thichness and a displacement of 42cc and with 42mm piston it goes to 2 mm wall thichnessand the displacement is 47 cc so please suggest me the best piston to replace with waiting for your suggestions Abdul Samad
Posted on: 7/29/2010 1:07 AM by Author "Falcons Cuz" in the forum "Engine Conversions"
http://www.rcuniverse.com/forum/fb.asp?m=9895821

INCREASING CC OF A TWO STROKE ENGINE!!!!!!!!!!!
Hi Guys i have an old chain saw two stroke engine which is a 33 cc short block engine with a walbro carb and it truns an 18*8 prop at about 7600 RPM but i want more power from it so i decided to increase its piston diameter to 40mm (stock one have a 36 mm diameter of piston) but i am not sure that will it work and increase its Rpm and power and do any one have done this before?and is it possible? i also want to know that how to alter the port timing of that engine and if you guys have some links about such type of alteration then let me know waiting for your reply Abdul Samad
Posted on: 7/28/2010 12:03 PM by Author "Falcons Cuz" in the forum "Engine Conversions"
http://www.rcuniverse.com/forum/fb.asp?m=9894091

CONTROL SURFACES AREA NEED HELP!!!!!!!!!!!!!!!!!!!!!!
Hello Guys i am in the process of building my 1/4th scale rc airplane which looks like a sig rascal and it is a high wing trainer and i am using a 33 cc chain saw gas engine with an 18*8 propeller and the goal of my project is to built an rc airplane which is quiet stable in the air and the control response will be nice but after completing the fuselage structure i am a little worried about the calculations of the control surface area on my rc airplane and what control surface area size would be better for a nice controll on my rc airplane so guys please tell me that how do i calculate the control surface area on my rc airplane like ailerons,rudder,elevator etc the specification of the airplane i am making are as follows wing span 8 foots wing width 18 inches fuselage length 6 foots gross weight 7 kg wing loadings 18oz/sq foots (aprox)
Posted on: 7/28/2010 9:29 AM by Author "Falcons Cuz" in the forum "Beginners"
http://www.rcuniverse.com/forum/fb.asp?m=9893767

33cc RYOBI CONVERSION
Hi Guys i am converting a 33 cc ryobi gas chain saw engine for rc airplane use so i need the power ratings of the engine ,RPM and which propeler does it suits and if any one of you have converted this type of engine thn please send me that link waiting for your replies Falcons Cuz
Posted on: 6/8/2010 6:58 AM by Author "Falcons Cuz" in the forum "Engine Conversions"
http://www.rcuniverse.com/forum/fb.asp?m=9789081

WHAT TYPE OF CHAIN SAW IS IT???????????????????
REPLIES Falcons Cuz
Posted on: 4/21/2010 4:59 AM by Author "Falcons Cuz" in the forum "Engine Conversions"
http://www.rcuniverse.com/forum/fb.asp?m=9677378

MOVED: WHAT TYPE OF CHAIN SAW IS IT???????????????????
Engine Conversions: http://www.rcuniverse.com/forum/fb.asp?m=9677378
Posted on: 4/21/2010 4:59 AM by Author "Falcons Cuz" in the forum "Gas Engines"
http://www.rcuniverse.com/forum/fb.asp?m=9677511

MOVED: FOUR STROKE GAS ENGINES FOR SALE!!!!!!!!!
Engine Conversions: http://www.rcuniverse.com/forum/fb.asp?m=9675501
Posted on: 4/21/2010 2:21 AM by Author "Falcons Cuz" in the forum "Gas Engines"
http://www.rcuniverse.com/forum/fb.asp?m=9677274

FOUR STROKE GAS ENGINES FOR SALE!!!!!!!!!
HELLO GUYS AS I SAW THAT GAS ENGINES WERE BECOMING POPULAR IN RC WORLD I STARTED BRINGING THEM AND TODAY I GET A LOT OF FOUR STROKE ENGINES THESE ARE VERY NICE ENGINES HERE ARE SOME PICS OF ONE OF THAT ENGINES SO THIS IS ONE OF THE ENGINE I AM TALKING ABOUT AND IT WEIGHTS THREE KG BUT THERE IS A LOT OF WEIGHT TO CUT OFF AND THEY ARE NEW ENGINES THIS ENGINE HAVE A CENTRIFUGAL CLUTCH AND A WALBRO CARB AND IF YOU GUYS LIKE THIS ENGINES I MAY MARKET THEM ALL OVER THE WORLD. I CAN ALSO CONVERT THESE ENGINES FOR AIRCRAFT USE AND CUT ALL OF THE EXCESS ALUMINIUM I ALSO HAVE A VERSION OF THE SAME ENGINE WITH PULL STARTER AND THE COVER IF YOU GUYS ARE INTRESTED IN THESE ENGINES THEN I WILL GIVE MORE INFORMATION AND PICS. FEEL FREE TO ASK ANY QUESTION HOPE THAT YOU LIKE THIS BABY WAITING FOR YOUR POSITIVE REPLIES
Posted on: 4/20/2010 7:26 PM by Author "Falcons Cuz" in the forum "Engine Conversions"
http://www.rcuniverse.com/forum/fb.asp?m=9675501

RE: FOUR STROKE GAS ENGINES FOR SALE!!!!!!!!!
no it is a four stroke not a two stroke which uses that mixture this engine only uses gas(petrol) as its fuel
Posted on: 4/20/2010 3:53 PM by Author "Falcons Cuz" in the forum "Engine Conversions"
http://www.rcuniverse.com/forum/fb.asp?m=9675837

RE: cub crash video
it looks better in rewind
Posted on: 4/20/2010 3:40 PM by Author "Falcons Cuz" in the forum "Crash & Rebuild"
http://www.rcuniverse.com/forum/fb.asp?m=9675810

FUSELAGE CONSTRUCTION NEED HELP GUYS!!!!!!!!!!!!!!!!!!!!!!!!!
SHEETS INSTEAD OF BALSA ANY SUGGESTION WOULD BE HIGHLY APPRICIATED FALCON CUZ
Posted on: 4/14/2010 12:23 PM by Author "Falcons Cuz" in the forum "Scratch Building, Aircraft Design, 3D/CAD"
http://www.rcuniverse.com/forum/fb.asp?m=9660479

RE: ECHO SB1080 runs great!
AND THE PISTON STROKE WAITING FOR YOUR REPLY Falcon Cuz
Posted on: 3/5/2010 1:55 PM by Author "Falcons Cuz" in the forum "Engine Conversions"
http://www.rcuniverse.com/forum/fb.asp?m=9557102

WHERE DO I GOT MY RADIO STUFF?????????????
SO PLEASE FEEL FREE ANY SUGGESTION WOULD BE APPRECIATED GREATLY WAITING FOR YOUR SUGGESTION Falcons Cuz
Posted on: 3/5/2010 1:32 PM by Author "Falcons Cuz" in the forum "RC Radios, Transmitters, Receivers, Servos, gyros"
http://www.rcuniverse.com/forum/fb.asp?m=9557066

RE: HOW TO CHOOSE THE RIGHT SERVOS FOR MY AIRPLANE?
HELLO GUYS THANKS TO YOU GUYS FOR SUCH A FREQUENT SUGGESTIONS[:D]
Posted on: 3/5/2010 1:09 PM by Author "Falcons Cuz" in the forum "Beginners"
http://www.rcuniverse.com/forum/fb.asp?m=9557021

HOW TO CHOOSE THE RIGHT SERVOS FOR MY AIRPLANE?
GREATLY WAITING FOR YOUR INFORMATIONAL REPLIES Falcons Cuz
Posted on: 3/5/2010 11:20 AM by Author "Falcons Cuz" in the forum "Beginners"
http://www.rcuniverse.com/forum/fb.asp?m=9556806

WHAT IS BETTER ENGINE FOR MY PROJECT?????????????
HI GUYS LAST WEEK I HAD SEEN THAT SOME GUYS ARE BUILDING PRETTY COOL RC AIRPLANES FROM WEAD EATER AND CHAIN SAW ENGINES AND THE I HAVE DECIDED TO BUILD ONE LIKE THIS http://www.instructables.com/id/8_Ft_Wingspan_Coroplast_RC_Piper_Cub_flown_by_25cc/ BUT I WANT TO MAKE IT A BIT MORE POWERFULL AND INSTEAD OF A 25 CC ENGINE I WANT TO USE AN ENGINE AROUND 38CC TO 5OCC AND IF YOU GUYS HAVE BUILD ONE LIKE THIS SO PLEASE SUGGEST ME THAT WHAT IS A BETTER ENGINE FOR THIS PURPOSE WAITING FOR YOUR EARLIER REPLIES FALCONSAMAD
Posted on: 1/26/2010 1:30 AM by Author "Falcons Cuz" in the forum "Engine Conversions"
http://www.rcuniverse.com/forum/fb.asp?m=9448749

MOVED: WHAT IS BETTER ENGINE FOR MY PROJECT?????????????
Engine Conversions: http://www.rcuniverse.com/forum/fb.asp?m=9448749
Posted on: 1/26/2010 1:30 AM by Author "Falcons Cuz" in the forum "Gas Engines"
http://www.rcuniverse.com/forum/fb.asp?m=9448924

HOW TO MEASURE THE CC OF A TWO STROKE ENGINE?
HI GUYS I WANT TO MEASURE THE CC RATTINGS OF MY TWO STROKE BACK SPRAYER ENGINE THE PISTON DIAMETER IS 31.75 mm AND THE PISTON STROKE IS 34.925mm so if any one of you have an idea how to calculate the cc rattings of my engine so plz kindly reply me waiting for your replies Falcons Cuz
Posted on: 1/24/2010 1:51 PM by Author "Falcons Cuz" in the forum "Scratch Building, Aircraft Design, 3D/CAD"
http://www.rcuniverse.com/forum/fb.asp?m=9443671

RE: GAS/GLOW HOW TO....
hi guys i have a 30cc ECHO weed eater engine and i have converted it on glow plug but i did not found glow fuel so if i run it on gasoline do it works and also i have a gallon of thinner do any one of them works
Posted on: 8/1/2009 5:49 AM by Author "Falcons Cuz" in the forum "Engine Conversions"
http://www.rcuniverse.com/forum/fb.asp?m=8980870