Vids and pics of you MSR posts them here
Heres mine. http://www.youtube.com/user/RCHelicopters
Posted on: 9/19/2009 12:45 PM by Author "Fly To Chill" in the forum "E-Flite Helicopters"
http://www.rcuniverse.com/forum/fb.asp?m=9107771

RE: Oh No! New Blade!
4) Check the swash movement. If the elevator control pulls Up when applying Right rudder (and Down when Left rudder), go to MIX 1 and set the following values: RUDD -> ELEV, D +44%, U +57% Leave the other settings as is. The +44% and 57% values indicated above may vary slightly for your MSR. Adjust it accordingly. Can some one tell me what Rudd -> means and after ELEV you have d and u what dose that maen,I got everything else but I dont understand this part.thanks
Posted on: 9/17/2009 9:54 PM by Author "Fly To Chill" in the forum "E-Flite Helicopters"
http://www.rcuniverse.com/forum/fb.asp?m=9104309

RE: Whats your setting for MSR on a dx6i
[quote]ORIGINAL: fusebmx13 hhmm what are those directions in the box for? [;)] Bind it in airplane mode, you are done. Nothing else to set. I use the DX7, my friend has the 6i and we have the same settings as far as DR. In low rate we have 80% throw. In high rates it is 100% and also the longer settings on the swashplate. [/quote] I fliped threw the book fast ,but never seen anything about dx6i setting other then to bind it thanks.
Posted on: 9/15/2009 11:44 PM by Author "Fly To Chill" in the forum "E-Flite Helicopters"
http://www.rcuniverse.com/forum/fb.asp?m=9099332

Whats your setting for MSR on a dx6i
Hey I was hoping someone can help me set up my msr BNF with my dxi.thanks
Posted on: 9/15/2009 9:16 PM by Author "Fly To Chill" in the forum "E-Flite Helicopters"
http://www.rcuniverse.com/forum/fb.asp?m=9098747

new heli
Dose anyone have one of these ,i think it looks cool ,should i get one? http://www.youtube.com/watch?v=ttOLBuA4sFk
Posted on: 8/21/2009 9:55 PM by Author "Fly To Chill" in the forum "E-Flite Helicopters"
http://www.rcuniverse.com/forum/fb.asp?m=9034549

RE: new heli
Really, i fly cp helis and i tryed the trex 250 for indoor flight (my house) and the 250 is to much for indoor flight a mcx is to easy to fly ,so i think this might be the ticket.
Posted on: 8/21/2009 9:54 PM by Author "Fly To Chill" in the forum "E-Flite Helicopters"
http://www.rcuniverse.com/forum/fb.asp?m=9034713

RE: Trex 250 owner's lounge
Hey noob glad to see you got her in the air and flying ,as far as wag gose i noticed it when i flew in wind on calm day it worked fine but when the wind kicked up that was it wag ,and when i flew backwards the tail would not hold very well felt mushy,from what ive heard there have done a better job with the new models,maybe you got a good one .good luck with it.
Posted on: 8/21/2009 10:59 AM by Author "Fly To Chill" in the forum "T-Rex heli"
http://www.rcuniverse.com/forum/fb.asp?m=9033419

RE: Trex 250 owner's lounge
I placed my esc under the battery tray,great for the cg ,i had it were noob has his and it was hard to get to the main gear I had to take the esc off just to get to the main gear hey noob what battery are you useing i used smc 800 mah they fit very good and held a high head speed for the full flight,sorry to hear about your ball links,good luck and let me know how that tail works.
Posted on: 8/20/2009 11:05 AM by Author "Fly To Chill" in the forum "T-Rex heli"
http://www.rcuniverse.com/forum/fb.asp?m=9030747

RE: Trex 250 owner's lounge
so noob did you fly it yet how dose that tail hold is there any wag?
Posted on: 8/19/2009 10:02 PM by Author "Fly To Chill" in the forum "T-Rex heli"
http://www.rcuniverse.com/forum/fb.asp?m=9029595

RE: Trex 250 owner's lounge
The 205d are the way to go,and i used 32mm tail blades ,I had less wag with the 32mm over the 40mm,and keep a eye on the head for slop gaui bearing work much better,and look for slop in the tail,make sure all ball link are loose with no binding, especially in the tail ,you may have to go with a bigger tail servo and a cf push rod to get the tail rite,hope this helps.
Posted on: 8/19/2009 10:36 AM by Author "Fly To Chill" in the forum "T-Rex heli"
http://www.rcuniverse.com/forum/fb.asp?m=9028051

RE: my 500 esp is here
i HAD A 250 AND HATED IT ,tail sucked in order to make it work some what i need a cf push rod a over sized tail servo ,just to many problems. good luck noob ,my next heli will be a trex 700n maybe order it this weekend
Posted on: 8/18/2009 11:01 AM by Author "Fly To Chill" in the forum "T-Rex heli"
http://www.rcuniverse.com/forum/fb.asp?m=9025367

RE: my 500 esp is here
I hope you got a newer 250 I had a old version and i could never get the tail rite ,it was a nightmare ,goog luck noob
Posted on: 8/18/2009 10:56 AM by Author "Fly To Chill" in the forum "T-Rex heli"
http://www.rcuniverse.com/forum/fb.asp?m=9025359

RE: my 500 esp is here
[quote]ORIGINAL: noobflyer01 Its possible O.D. but I wouldnt recommend it without the electronics.   I was thinking about going flybarless but decided to wait a little bit longer when the prices go down a little bit.   I'm always looking at the for sale sections looking for the mikado v-bar 4.0. [/quote] I hope you got a newer one I had a old version and i could never get the tail rite ,it was a nightmare ,goog luck noob
Posted on: 8/17/2009 11:21 PM by Author "Fly To Chill" in the forum "T-Rex heli"
http://www.rcuniverse.com/forum/fb.asp?m=9024504

RE: difference between belted and geared helis
+1 for the blueray
Posted on: 8/1/2009 11:52 PM by Author "Fly To Chill" in the forum "T-Rex heli"
http://www.rcuniverse.com/forum/fb.asp?m=8982710

RE: How to adjust swash plate on HBK2?
[quote]ORIGINAL: truman40 Thanks heaps Tommy thats an awesome explanation and I understand it fully. With the servo links I do I disconnect them from the balls? Do I just use slight force to pull them off or even a small pair of pliers? I don't want to do this and break them but it seems to be the obvious way? Thanks once again, most of the setup does seem fine and I have checked the blade tracking and so far its good. [/quote] Becarful I broke a ball off the swash the first time i tried to push the link back on the ball.hope this helps
Posted on: 7/25/2009 11:41 PM by Author "Fly To Chill" in the forum "Esky Helicopters"
http://www.rcuniverse.com/forum/fb.asp?m=8963993

RE: my 500 esp is here
[quote]ORIGINAL: noobflyer01 i'm thinking about the trex250 for my next project.  i always wanted a micro heli that is 3d capable.    <a target=''_blank'' href=''http://www.sweetim.com/s.asp?im=gen&lpver=3&ref=10''><img border=''0'' alt='''' src=''http://cdn.content.sweetim.com/sim/cpie/emoticons/00020389.gif'' />  Noob dont do it I just sold mine and will never look back,its just to small and its not the best heli trex has come out with in my opinion,it just has issuse,I can tell you this i flew a trex700e today and it puts my 600 to shame prformence wise,power power power and with the flybarless head it had it was on rails it was Danny's from Esprit Model whst a setup I also flew David's trex 600n /flybarless also and it was very nice as well,any one want to buy a 600e lol just my .02 [/quote]
Posted on: 7/12/2009 10:13 PM by Author "Fly To Chill" in the forum "T-Rex heli"
http://www.rcuniverse.com/forum/fb.asp?m=8927715

RE: DS821 on Trex ESP
[quote]ORIGINAL: TD1 Guys, I am putting together my second TREX 600 esp, and I am having a problem with the Spektrum DS821 servos on the head, they don´t fit, what can I do to solve this problem, do you have any pictures? FYI I used the Align DS610/620 servos on the first build and no change was needed they went perfect. [/quote] I used them on a 600e and they worked fine ,But there a much better servos out there.Im useing these now and they are great. http://www.rremodels.com/hyperionatlasds20xsmdcorelessdigitalservo.aspx
Posted on: 7/9/2009 11:56 AM by Author "Fly To Chill" in the forum "T-Rex heli"
http://www.rcuniverse.com/forum/fb.asp?m=8918987

RE: Walkera vs E Sky
+1 for Esky ,my first cp heli was a hbk2 and flew the heck out of it.
Posted on: 7/7/2009 10:38 AM by Author "Fly To Chill" in the forum "Electric RC Helis"
http://www.rcuniverse.com/forum/fb.asp?m=8913204

RE: my 500 esp is here
Hey guys I this is a 500 forum but I had to post a vid for Noob and any one else , Noob I was trying some new things and wanted you to see,hope you like it. http://www.youtube.com/watch?v=7U-eniiNzOk&feature=channel_page http://www.youtube.com/watch?v=iWcb0i7H6dM&feature=channel_page
Posted on: 7/5/2009 8:34 PM by Author "Fly To Chill" in the forum "T-Rex heli"
http://www.rcuniverse.com/forum/fb.asp?m=8908966

RE: my 500 esp is here
Nob the link wont work for me!!!!
Posted on: 6/30/2009 10:24 AM by Author "Fly To Chill" in the forum "T-Rex heli"
http://www.rcuniverse.com/forum/fb.asp?m=8894389

RE: The best heli
post a link.
Posted on: 6/27/2009 3:05 PM by Author "Fly To Chill" in the forum "T-Rex heli"
http://www.rcuniverse.com/forum/fb.asp?m=8886029

RE: The best heli
[quote]ORIGINAL: Cleared2Engage I've had the 600 ESP since late march and have had about 100 flights on it. Best copter I've flown out of the box. Even does great tic tocs and other 3d manuevers with authority using DS821 servos. If you can fly the Blade CP then you can fly anything. Here is the list of electronics I'm using on it to give you an idea of what can be used
Posted on: 6/19/2009 8:25 PM by Author "Fly To Chill" in the forum "T-Rex heli"
http://www.rcuniverse.com/forum/fb.asp?m=8865701

RE: tail belt prob
You might have a twist in the belt....
Posted on: 6/18/2009 9:56 AM by Author "Fly To Chill" in the forum "T-Rex heli"
http://www.rcuniverse.com/forum/fb.asp?m=8861788

RE: my 500 esp is here
Hey Noob great vid and I seen that rainbow, looked good,keep it up ,hey since you live in orlando we need to get up and fly together some time,great job Noob.
Posted on: 6/6/2009 1:35 PM by Author "Fly To Chill" in the forum "T-Rex heli"
http://www.rcuniverse.com/forum/fb.asp?m=8830261

RE: my 500 esp is here
That really sucks Noob sorry to hear that you crashed your new esp. Hey Micheal did you get you esp up and flying again ,That thing sounds sick and it looks fast, you did a great job on it.
Posted on: 5/25/2009 4:05 PM by Author "Fly To Chill" in the forum "T-Rex heli"
http://www.rcuniverse.com/forum/fb.asp?m=8797363

RE: my 500 esp is here
A$$$$. I ordered 2 more zippy's packs for it. I did fly it today in the park and did some big... if you like the esp500 then you would love the 600esp,its just a great heli to fly. [/quote]
Posted on: 5/25/2009 8:44 AM by Author "Fly To Chill" in the forum "T-Rex heli"
http://www.rcuniverse.com/forum/fb.asp?m=8796447

RE: my 500 esp is here
Hey Noob glad to see she done now if the weather holds up you can get some flight time in, nice heli you going to love and never look back.
Posted on: 5/22/2009 9:15 AM by Author "Fly To Chill" in the forum "T-Rex heli"
http://www.rcuniverse.com/forum/fb.asp?m=8789705

RE: inverted
[quote]ORIGINAL: Skarn Nice flying bro! Now cut the grass next time ;) Skarn [/quote] I think it will be awile before grass cutting lol thanks Skarn.
Posted on: 5/13/2009 9:10 AM by Author "Fly To Chill" in the forum "T-Rex heli"
http://www.rcuniverse.com/forum/fb.asp?m=8765157

RE: inverted
[quote]ORIGINAL: noobflyer01 nice inverted man! [:D] your progress is nothing short of amazing.[sm=thumbs_up.gif] [/quote] Thanks Noob,Im glad to hear you got your 500 cant wait to see you get it in the air your going to love it.
Posted on: 5/13/2009 9:08 AM by Author "Fly To Chill" in the forum "T-Rex heli"
http://www.rcuniverse.com/forum/fb.asp?m=8765152

tic toc
My first time trying tic tocs and my first backwards loop ,vid is not to good. http://www.youtube.com/watch?v=tt4dGqQ1Klk&feature=channel_page
Posted on: 5/12/2009 9:57 AM by Author "Fly To Chill" in the forum "T-Rex heli"
http://www.rcuniverse.com/forum/fb.asp?m=8762237