RE: Im building a 12S A123 from dewalt pack
Thanks but that seams to be the easy way out. I was thinking more if i could crossover cables from on set 6cells to the other half so they both are at the same voltage allways. Does anybody know if in the balancers which input takes priority?? Felipe
Posted on: 3/27/2007 7:35 PM by Author "Flying Tivo" in the forum "Batteries & Chargers"
http://www.rcuniverse.com/forum/fb.asp?m=5626488

Im building a 12S A123 from dewalt pack
How do you balance a 12S pack? Do i need two 10 cell balancers like TP210? How would you wire the pack so both balancers know the same voltage the other cells are? Thanks Felipe
Posted on: 3/27/2007 1:03 PM by Author "Flying Tivo" in the forum "Batteries & Chargers"
http://www.rcuniverse.com/forum/fb.asp?m=5624639

12M radio Flyers club or specific forum for owners
Are there any? Thanks Felipe
Posted on: 5/8/2006 6:07 PM by Author "Flying Tivo" in the forum "Futaba Radios Direct support forum"
http://www.rcuniverse.com/forum/fb.asp?m=4255158

RE: coleman gas and Klotz oil
OK, im back with the results. First I took some mixed fuel from my one gallon jug and poured it on a crystal container. The mix had a homogenous color, meaning that the oil was in suspension. Second I added extra oil(original techniplate)generously. Now i can see what you mean that they wont mix. What really hapopens is that the oil goes to the bottom of the container and would seam that it wont mix. But as soon as you start to stir the container you can actually see the oil go into suspension and mix homogenously. For a test I left the container outside overnight at 33degrees F and the mix stayed in suspension. Long story short, Klotz is Ok to mix with naphta based fuels and wont make a hole in your piston. 64:1 is what I use, 2-1/2 oz per gallon. Cheers Felipe
Posted on: 11/25/2003 11:24 AM by Author "Flying Tivo" in the forum "RC Helicopter General Discussions"
http://www.rcuniverse.com/forum/fb.asp?m=1304732

RE: coleman gas and Klotz oil
I have been running ozark fuel and Klotz original techniplate at 2 oz per gallon. No smoke, no overheating, no predetonation, and i really hope the piston is still in there. Tonight i will mix some ozark and klotz in a crystal container to see what you mean. The description on klotz web site said that it will mix with gasoline and alcohol and that is stays in suspension. Suspension really means it does not mix but i will post on results tomorrow. Felipe
Posted on: 11/24/2003 6:21 PM by Author "Flying Tivo" in the forum "RC Helicopter General Discussions"
http://www.rcuniverse.com/forum/fb.asp?m=1302968

RE: Metal Blade Grips For Vario Benzin
Yes to all probably 1 or 2 as long as it is a fair price color would be a + Thanks
Posted on: 10/31/2003 7:40 PM by Author "Flying Tivo" in the forum "RC Helicopter General Discussions"
http://www.rcuniverse.com/forum/fb.asp?m=1243087

Os70 Sz-h Ring
Bill: Hope you can help me? I bought one of this engines for a vario helicopter, but the crankshaft length is not enough to fit the clutch and fan. I heard from vario distributors that OS manufactures a special version for vario. Whant to know if this is true? And where can I get one of this version. Actually I bought 2 of this engines still NIB. Thanks Felipe
Posted on: 8/27/2003 6:33 PM by Author "Flying Tivo" in the forum "O.S. Engines Support"
http://www.rcuniverse.com/forum/fb.asp?m=1094836

Tartan Twin fuel
BlackMamba: Which Klotz? Techniplate? or the motorcycle 2-stroke? Thanks
Posted on: 8/22/2003 2:46 PM by Author "Flying Tivo" in the forum "RC Fuels"
http://www.rcuniverse.com/forum/fb.asp?m=496441

Ff-240
Thanks a lot
Posted on: 8/8/2003 6:37 PM by Author "Flying Tivo" in the forum "O.S. Engines Support"
http://www.rcuniverse.com/forum/fb.asp?m=1036498

Ff-240
Hello Bax: I need a little help. I got a FF-240 from a friend that was all rusty and bearings where all seized up. I disasembled it and did not take the precaution to notice where the timing of the crankshaft and camshaft where in relation to each other. The engine now has a full set of new bearings and has been cleand and pampered. The only thing missing is the setup of the timing. I noticed that there is a dot on the crankshaft and a hole on the camshaft. This leads me to belive that they should match up, but still dont whant to fire it up and find out the hard way. Well to sum it up: 1) How should the dot and the hole line up? 2) Which is the correct cylinder firing order?
Posted on: 8/8/2003 3:29 PM by Author "Flying Tivo" in the forum "O.S. Engines Support"
http://www.rcuniverse.com/forum/fb.asp?m=1036496

KISS is goood
[url]http://www.maxxprod.com/mpi/mpi-9.html[/url] Its called a battery bug, and works perfectly, for tx and rx. this is quite simple. Hope it helps bye
Posted on: 7/12/2003 5:56 PM by Author "Flying Tivo" in the forum "Batteries & Chargers"
http://www.rcuniverse.com/forum/fb.asp?m=948003

And it only gets worst
Now I recieved my credit card statement with a double whami :mad: This will be the last i see or hear from Crap City. Happy Flying
Posted on: 7/11/2003 9:52 PM by Author "Flying Tivo" in the forum "RC Radios, Transmitters, Receivers, Servos, gyros"
http://www.rcuniverse.com/forum/fb.asp?m=940995

Not for me
Im still waiting (6 weeks) for RD149DP reciever. They send me the wrong reciever the first time, I told them I would keep it anyways and that they could charge me for the wrong reciever, but still waiting on the original reciever. The combo Tx and RX was lacking the flags for the frequency. I would not order from them anymore. Now tha tower has more configuration on radios and recievers I would spend the little extra money for their reliabliity. Felipe
Posted on: 7/9/2003 9:39 PM by Author "Flying Tivo" in the forum "RC Radios, Transmitters, Receivers, Servos, gyros"
http://www.rcuniverse.com/forum/fb.asp?m=940991

Boy, do I feel your pain?
FaisalK: Im still driving my 3rd Generation Burro, with Mag horseshoes with 3D thread, running on a 3.2Liter powered by water and extremly long green grass. It only gives me 2 kilometers a gallon but it is the best around here.(Mexico). OOOOOppppsss, forgot tu mention my exclusive FOX boots, which enhances the feel of the road. Viva Mexico!!!!!!!!!!!!!!!!!!!!!!!!!!! :D :D :D :D :D :D
Posted on: 7/9/2003 9:15 PM by Author "Flying Tivo" in the forum "Glow Engines"
http://www.rcuniverse.com/forum/fb.asp?m=936268

ACC180 Rx Battery Bug from MPI maxx
Has anyone used this pruduct? How does it stack up? What is the preset cutoff voltage? Thanks Felipe
Posted on: 7/2/2003 4:22 PM by Author "Flying Tivo" in the forum "Batteries & Chargers"
http://www.rcuniverse.com/forum/fb.asp?m=918613

Duracell and Energizer NiMh 1800mah?
Has anyone tried to build a reciever battery pack, either a 4.8 or 6 Volts, with this type of batteries? What charge rate are you using and what has been the experience? thanks Felipe
Posted on: 6/23/2003 6:33 AM by Author "Flying Tivo" in the forum "Batteries & Chargers"
http://www.rcuniverse.com/forum/fb.asp?m=889437

9C-How to program flapperons...........
I need to program flapperons to the variable rate on the right side of the tx. The thing is that I need it to start working from top to bottom not from middle to bottom. Thanks Felipe
Posted on: 6/13/2003 5:21 PM by Author "Flying Tivo" in the forum "Futaba Radios Direct support forum"
http://www.rcuniverse.com/forum/fb.asp?m=859561

Linux
Sorry to get into this conversation, but, Windoze? Why would you whant to use windows, there are so many embeded processors in small appliances that use linux and you could even use tcp/ip packets in a Wi-Fi enviroment to control or simulate an RC. And getting all the telemetry down would not be a problem. Or I could be mistaken? Felipe
Posted on: 6/12/2003 4:06 PM by Author "Flying Tivo" in the forum "RC Radios, Transmitters, Receivers, Servos, gyros"
http://www.rcuniverse.com/forum/fb.asp?m=294724

OS FS-61 shutting down
Most probably the front bearing overheated, and got damage, replace it. Felipe
Posted on: 6/9/2003 5:36 PM by Author "Flying Tivo" in the forum "O.S. Engines Support"
http://www.rcuniverse.com/forum/fb.asp?m=745543

OS. FF-240, Muffler Question
Hi, is there a way to make mufflers for this engine or is the only way out is to buy the flexible adapters? They are expensive and dont know if they will reach to my desired length. Thanks Happy Flying!
Posted on: 5/20/2003 10:04 PM by Author "Flying Tivo" in the forum "Gas Engines"
http://www.rcuniverse.com/forum/fb.asp?m=789333

FF-240 In need of Manual?
Where can I download a manual of the OS FF-240, and if anyone knows when was the last year that they where manufacture? Thanks
Posted on: 1/17/2003 1:30 AM by Author "Flying Tivo" in the forum "O.S. Engines Support"
http://www.rcuniverse.com/forum/fb.asp?m=487583