RE: Clunk line for Gas engine
Holy post date bat man.
Posted on: 9/12/2012 3:37 AM by Author "FullSpool" in the forum "Gas Engines"
http://www.rcuniverse.com/forum/fb.asp?m=11225651

RE: CRRC 55 TWIN
[youtube]http://www.youtube.com/watch?v=VAfwUPcQUuI&feature=share&list=UUeTID8DdtGvrkOaY-gifaMQ[/youtube]
Posted on: 9/4/2012 7:44 PM by Author "FullSpool" in the forum "Gas Engines"
http://www.rcuniverse.com/forum/fb.asp?m=11217759

RE: Engine for older H9 89
I flew mine with a g26. It flew it great!
Posted on: 8/21/2012 3:48 AM by Author "FullSpool" in the forum "Gas Engines"
http://www.rcuniverse.com/forum/fb.asp?m=11200627

RE: Gas Tank Setup?
It's different as most hospital stuff is nitrogen/air rated. All info can be found here. http://www.vital-rc.com/fuel-line.html if you're interested. I buy all my viton from McCaster as it's another reliable source.
Posted on: 8/3/2012 11:10 AM by Author "FullSpool" in the forum "Gas Engines"
http://www.rcuniverse.com/forum/fb.asp?m=11179764

RE: Gas Tank Setup?
I use my poly line that I carry, works great and doesn't stiffen up like tygon. For the Clunk I really like walbro clunks. :)
Posted on: 7/30/2012 1:48 PM by Author "FullSpool" in the forum "Gas Engines"
http://www.rcuniverse.com/forum/fb.asp?m=11174864

RE: What size battery on a DLE-55
I use my batteries for ignition, they are a123 1100mah packs. If you're interested just pm me or go to vital-rc website.
Posted on: 7/27/2012 11:08 AM by Author "FullSpool" in the forum "Gas Engines"
http://www.rcuniverse.com/forum/fb.asp?m=11171388

RE: shortening diodes
Diodes have low resistance flow in one direction resulting in .7 voltage drop depending on diode. Yes you can shorten the diodes to fit your application. Here are my packs that I sell. [IMG]http://www.teamflyingcircus.com/forum/attachments/f32/38879d1325374258-ignition-batteries-dsc09987.jpg[/IMG] [IMG]http://www.teamflyingcircus.com/forum/attachments/f32/38880d1325374266-ignition-batteries-dsc00128.jpg[/IMG] [IMG]http://www.teamflyingcircus.com/forum/attachments/f32/38887d1325396762-ignition-batteries-3achart.jpg[/IMG] [IMG]http://www.teamflyingcircus.com/forum/attachments/f32/38889d1325435806-ignition-batteries-6achart.jpg[/IMG] [url]http://www.youtube.com/watch?v=rjMPy-V35Os&list=UUeTID8DdtGvrkOaY-gifaMQ&index=4&feature=plcp[/url] [url]http://www.youtube.com/watch?v=zUdlS_059v0&list=UUeTID8DdtGvrkOaY-gifaMQ&index=3&feature=plcp[/url
Posted on: 7/5/2012 5:54 PM by Author "FullSpool" in the forum "Gas Engines"
http://www.rcuniverse.com/forum/fb.asp?m=11144604

RE: Is it my ignition or engine?
http://www.rcextremepower.net/ignitions.html
Posted on: 6/8/2012 3:35 AM by Author "FullSpool" in the forum "Gas Engines"
http://www.rcuniverse.com/forum/fb.asp?m=11110975

RE: DLE 55 oil slection?
Pennzoil, RedLine, or Ultra HP, less oil doesn't mean more power.
Posted on: 6/1/2012 9:14 PM by Author "FullSpool" in the forum "Gas Engines"
http://www.rcuniverse.com/forum/fb.asp?m=11103322

RE: DA 250 Twin Super Charged Four Stroke
From FG.
Posted on: 5/18/2012 7:05 PM by Author "FullSpool" in the forum "Gas Engines"
http://www.rcuniverse.com/forum/fb.asp?m=11086286

RE: Your list of hightest quality engines?
Honda.
Posted on: 5/7/2012 7:34 PM by Author "FullSpool" in the forum "Gas Engines"
http://www.rcuniverse.com/forum/fb.asp?m=11072384

RE: mintor engines
There are several threads going on right now, as of now people seem to be happy with them.
Posted on: 5/5/2012 7:53 PM by Author "FullSpool" in the forum "Gas Engines"
http://www.rcuniverse.com/forum/fb.asp?m=11069870

RE: Looking for new engines
Dle30 would be plenty of power for that , just find a more sutied prop if you need more rpm.
Posted on: 5/5/2012 5:37 AM by Author "FullSpool" in the forum "Gas Engines"
http://www.rcuniverse.com/forum/fb.asp?m=11068338

RE: Looking for new engines
I had a couple g26s and they are good motors, you have many of great choices. The g26 pulls my 1/4 scale taylorcraft around quite nice, it's isn't a power house by any means but does it's job and is very fun to fly. Find which motor works best for you. :)
Posted on: 5/5/2012 5:31 AM by Author "FullSpool" in the forum "Gas Engines"
http://www.rcuniverse.com/forum/fb.asp?m=11068875

RE: Looking for new engines
da50 way to much...... however the 35 would be nice!.
Posted on: 5/4/2012 8:38 PM by Author "FullSpool" in the forum "Gas Engines"
http://www.rcuniverse.com/forum/fb.asp?m=11068950

RE: Where is a good place to break in an engine?
break in the air, not on ground.
Posted on: 5/3/2012 4:50 PM by Author "FullSpool" in the forum "Glow Engines"
http://www.rcuniverse.com/forum/fb.asp?m=11067388

RE: ignition coversion
Call Milton and he can fix you up. Thanks www.vital-rc.com
Posted on: 4/23/2012 4:14 PM by Author "FullSpool" in the forum "Gas Engines"
http://www.rcuniverse.com/forum/fb.asp?m=11054081

RE: New DLE55-1100ma A123 for ignition?
It will run with higher voltages but you see no gain, however it will shorten life of the device as it wasn't designed for those voltages. Diodes are the way to go, I have Low voltage packs made up that are plug and play if you're interested. http://www.vital-rc.com/a123-batteries.html
Posted on: 4/22/2012 8:04 AM by Author "FullSpool" in the forum "Gas Engines"
http://www.rcuniverse.com/forum/fb.asp?m=11052083

RE: Experience with CNC CRRC 55cc Twin?
They are decent motors for the money, if I was going to buy one I would buy from usa dealer so you can get parts. http://www.taildraggerrc.com/gas-enginespropsspinners-and-engine-accessories.html If you look on there you can see some videos I took, chads a good guy and he can fix you up.
Posted on: 4/16/2012 6:57 PM by Author "FullSpool" in the forum "Gas Engines"
http://www.rcuniverse.com/forum/fb.asp?m=11044983

RE: Engine surging at wot, any ideas?
The old JC28 were alittle problematic, see if Milton is still running the trade in program . I think he was offering new jc30evo for your old jc28 plus $100. Thanks www.vital-rc.com
Posted on: 4/15/2012 8:09 PM by Author "FullSpool" in the forum "Gas Engines"
http://www.rcuniverse.com/forum/fb.asp?m=11043570

RE: WJ71 THROTTLE ARM PNP
WJ71 is a legit carb and works really well on 100cc class motors. I have great results with them on my jc120evos.
Posted on: 4/12/2012 9:34 AM by Author "FullSpool" in the forum "Gas Engines"
http://www.rcuniverse.com/forum/fb.asp?m=11038996

WJ71 THROTTLE ARM PNP
I have had many people wanting an easier method of connecting a throttle linkage to the WJ71 Walbro carb so your problems have been resolved. Parts are top notch and machined right here in the USA by one of the best. This arm will retain factory throttle/choke release but I recommend removing throttle stop/idle set. Connection detail: Pin from arm goes into small hole on carb stock arm. Threaded nut goes into backside of stock carb arm and is attached with supplied screwed. 2 open threaded connections are for ball link attachment, you pick which one works best for you. Price will be $12 plus shipping for the arm kit. Thanks Guys, I hope this makes it alittle easier for you installing your JC120. If you need an easier choke setup I suggest using Spot on Choke Arms. Install pics Below. [IMG]http://i244.photobucket.com/albums/gg13/99si_2007/2012-03-17_09-39-27_471.jpg[/IMG] [IMG]http://i244.photobucket.com/albums/gg13/99si_2007/2012-03-17_09-39-37_851.jpg[/IMG] [IMG]http://i244.photobucket.com/albums/gg13/99si_2007/2012-03-17_09-40-40_579.jpg[/IMG] [IMG]http://i244.photobucket.com/albums/gg13/99si_2007/2012-03-17_09-41-20_372.jpg[/IMG] Thanks www.vital-rc.com
Posted on: 4/10/2012 8:48 PM by Author "FullSpool" in the forum "Gas Engines"
http://www.rcuniverse.com/forum/fb.asp?m=11037064

RE: DLE 20cc at 6V?
I like to keep them around 5 volts, they seem to last the longest and have less issues. If you want a plug and play pack I have them here. http://www.vital-rc.com/a123-batteries.html
Posted on: 3/21/2012 11:07 AM by Author "FullSpool" in the forum "Gas Engines"
http://www.rcuniverse.com/forum/fb.asp?m=11009648

RE: Gasoline Rotary Engine from Thunder Tiger NEW!
must not been expose to much boost lol........ I've never seen one hold up.
Posted on: 3/17/2012 5:47 PM by Author "FullSpool" in the forum "Gas Engines"
http://www.rcuniverse.com/forum/fb.asp?m=11004597

RE: Gasoline Rotary Engine from Thunder Tiger NEW!
wonder if they will have apex seal problems like the old rx7s.....[;)]..
Posted on: 3/17/2012 9:44 AM by Author "FullSpool" in the forum "Gas Engines"
http://www.rcuniverse.com/forum/fb.asp?m=11004023

jc120evo info
I have had many people wanting an easier method of connecting a throttle linkage to the WJ71 Walbro carb so your problems have been resolved. Parts are top notch and machined right here in the USA. :198:This arm will retain factory throttle/choke release but I recommend removing throttle stop/idle set. Connection detail:Pin from arm goes into small hole on carb stock arm.Threaded nut goes into backside of stock carb arm and is attached with supplied screwed.2 open threaded connections are for ball link attachment, you pick which one works best for you.Price will be $12 plus shipping for the arm kit.Thanks Guys, I hope this makes it alittle easier for you installing your JC120. If you need an easier choke setup I suggest using Spot on Choke Arms, they are available through Azhar or myself. Install pics Below .[IMG]http://i244.photobucket.com/albums/gg13/99si_2007/2012-03-17_09-39-27_471.jpg[/IMG][IMG]http://i244.photobucket.com/albums/gg13/99si_2007/2012-03-17_09-39-37_851.jpg[/IMG][IMG]http://i244.photobucket.com/albums/gg13/99si_2007/2012-03-17_09-40-40_579.jpg[/IMG][IMG]http://i244.photobucket.com/albums/gg13/99si_2007/2012-03-17_09-41-20_372.jpg[/IMG]
Posted on: 3/17/2012 8:16 AM by Author "FullSpool" in the forum "Gas Engines"
http://www.rcuniverse.com/forum/fb.asp?m=11003920

RE: Life on ignition
If you're looking for grade A cells look no further. I also do not agree with using same pack for rx/and ign. http://www.vital-rc.com/a123-batteries.html
Posted on: 3/14/2012 1:22 PM by Author "FullSpool" in the forum "Gas Engines"
http://www.rcuniverse.com/forum/fb.asp?m=11000102

RE: JC EVO Engines
guys here is another video of the jc60 on 24 x8 prop, enjoy~ http://www.youtube.com/watch?v=OfiZJqDrMww&feature=player_embedded
Posted on: 3/11/2012 7:47 AM by Author "FullSpool" in the forum "Gas Engines"
http://www.rcuniverse.com/forum/fb.asp?m=10995278

RE: Walbro Carb for DLE30
When I was at DANA we had engraving machine we would program to engrave what style/font etched into the metal, the engraving looks very similiar as that machine produced. It was a generic machine but beat doing it by hand. If this was done by hand I got plenty of stuff for them to do. LoL... I will send manufacture an email and see what they say, so they can verfiy.
Posted on: 3/9/2012 7:28 PM by Author "FullSpool" in the forum "Gas Engines"
http://www.rcuniverse.com/forum/fb.asp?m=10992913

RE: Walbro Carb for DLE30
From what I've seen engraved models are from china orgin( not sure on mexico) and japan still sticks to traditional tooling. I've had no issues with the WT-718 or wt-759 from 23cc to 32cc.
Posted on: 3/9/2012 7:15 PM by Author "FullSpool" in the forum "Gas Engines"
http://www.rcuniverse.com/forum/fb.asp?m=10993614