|
RE: Nuance
Got my plane and just got my servo's so on with the build! Motor is on the way and than I will order my contra.
Posted on: 6/26/2012 11:04 AM by Author "Furyflyer2"
in the forum "Electric Pattern Aircraft"
http://www.rcuniverse.com/forum/fb.asp?m=11132569
RE: Contra Rotating Propeller Drive for f3a 2m Pattern Planes
So it's the comp version with gearbox and I just have to take off the gearbox?
Posted on: 6/21/2012 1:14 PM by Author "Furyflyer2"
in the forum "Electric Pattern Aircraft"
http://www.rcuniverse.com/forum/fb.asp?m=11126866
RE: Contra Rotating Propeller Drive for f3a 2m Pattern Planes
I'm a bit confused, do I have to get the C50 competition version with the gearbox? Or just a C50-13XL?
Posted on: 6/21/2012 12:19 PM by Author "Furyflyer2"
in the forum "Electric Pattern Aircraft"
http://www.rcuniverse.com/forum/fb.asp?m=11126818
RE: Contra Rotating Propeller Drive for f3a 2m Pattern Planes
Brenner What Hacker motor and contra set-up would you recommend for BJ Craft Nuance?
Posted on: 6/18/2012 9:17 PM by Author "Furyflyer2"
in the forum "Electric Pattern Aircraft"
http://www.rcuniverse.com/forum/fb.asp?m=11123292
RE: Mark Frankel's LEARJET 35A build
Same here if you could can I get a copy of the photos you have? email me at paul @ 3dxhobbies.com .
Posted on: 2/29/2012 9:29 PM by Author "Furyflyer2"
in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=10981424
RE: Mark Frankel's LEARJET 35A build
Making lots of progress, getting close to mounting the vertical fin.
Posted on: 2/29/2012 9:28 PM by Author "Furyflyer2"
in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=10982472
RE: Mark Frankel's LEARJET 35A build
Here are some pics.
Posted on: 2/29/2012 9:23 PM by Author "Furyflyer2"
in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=10982469
Mark Frankel's LEARJET 35A build
I picked up a partially built Mark Frankel's LEARJET 35A from Mark Frankel, so after looking for a build thread on one and not finding one, I figured I would do one. This learjet is a 35A version, fiberglass fuse and foam covered wing, stab and tail. I'm making it turbine powered. Right now I'm working on the tail and will post pics as I go along, I'm planing on making this a very scale build, so stay tune.
Posted on: 2/28/2012 8:38 PM by Author "Furyflyer2"
in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=10980885
RE: A4 Skyhawk build
Do you guys think a smoke tank can be added? I'm thinking about getting this jet.
Posted on: 9/12/2011 11:47 PM by Author "Furyflyer2"
in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=10714040
RE: ComArf Kangaroo Manual
Thank YOU!!!!!
Posted on: 5/8/2011 11:16 PM by Author "Furyflyer2"
in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=10509413
RE: ComArf Kangaroo Manual
Oh come on Give me a BREAK, FiberClassics / CompARF same thing. gezzzzz
Posted on: 5/8/2011 8:28 PM by Author "Furyflyer2"
in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=10509238
ComArf Kangaroo Manual
Anyone have a copy of a ComArf Kangaroo Manual?
Posted on: 5/8/2011 7:28 PM by Author "Furyflyer2"
in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=10509138
RE: Airfoilz Edge 540NX Powertrain
we have a combo for that plane http://3dxhobbies.com/new-airfoilz-edge-540nx-combo.html
Posted on: 1/18/2011 11:55 AM by Author "Furyflyer2"
in the forum "Foamies! - RC Electric Foam Aircraft"
http://www.rcuniverse.com/forum/fb.asp?m=10272153
RE: Airfoilz Extra 300NX
Just follow the directions, and you will have the best flying foamy out there.
Posted on: 6/22/2010 2:40 PM by Author "Furyflyer2"
in the forum "Foamies! - RC Electric Foam Aircraft"
http://www.rcuniverse.com/forum/fb.asp?m=9819842
RE: The Scratch Plane featured in Fly Rc
Short kits- http://stores.3dxhobbies.com/-strse-6464/Super-Scratch-Short-Kit/Detail.bok
Posted on: 3/18/2010 2:22 AM by Author "Furyflyer2"
in the forum "Scratch Building, Aircraft Design, 3D/CAD"
http://www.rcuniverse.com/forum/fb.asp?m=9591881
RE: Airfoilz looking for team pilots
Umm just the ability to fly and promote. You can email me and I can send you a agreement and see if it's for you. sales @ 3dxhobbies.com or visit http://airfoilz.com/forum
Posted on: 2/11/2010 11:00 PM by Author "Furyflyer2"
in the forum "Employment, Jobs, Help Wanted in Radio Control Industry"
http://www.rcuniverse.com/forum/fb.asp?m=9497224
RE: Brent Good Custom Airframes 106
Here is a link to the kit still working on a write up and a list of what's included- http://stores.3dxhobbies.com/-strse-6092/BGCA-Yak-dsh-545-100cc-Kit/Detail.bok
Posted on: 11/20/2009 1:07 AM by Author "Furyflyer2"
in the forum "Giant Scale Aircraft - 3D & Aerobatic"
http://www.rcuniverse.com/forum/fb.asp?m=9266810
RE: Brent Good Custom Airframes 106
Hey guys, I'm Paul G from http://3dxhobbies.com I'm looking forward to start, cutting these kits, and hope to have the plane up on the site an to take pre-order ASAP. Thanks, Paul G
Posted on: 11/17/2009 6:04 PM by Author "Furyflyer2"
in the forum "Giant Scale Aircraft - 3D & Aerobatic"
http://www.rcuniverse.com/forum/fb.asp?m=9260885
RE: Savage Flux RCU review
[quote]ORIGINAL: webdr No that one wasnt me. Look at the top of the reviews and it says who does them. matt [/quote] Matt contact me please paul @ 3dxhobbies.com.
Posted on: 5/31/2009 2:06 AM by Author "Furyflyer2"
in the forum "RC Electric Off-Road Trucks, Buggies, Truggies and more"
http://www.rcuniverse.com/forum/fb.asp?m=8812895
RE: The Scratch Plane featured in Fly Rc
Kits will be available at http://3dxhobbies.com in a few weeks.
Posted on: 5/25/2009 4:22 PM by Author "Furyflyer2"
in the forum "Scratch Building, Aircraft Design, 3D/CAD"
http://www.rcuniverse.com/forum/fb.asp?m=8797399
*****Airfoilz Edge 540 Full Fuse*******
We are proud to announce the new Airfoiz Edge 540 full fuse . We are looking at a mid March release. Still $69.99 and PRODLY MADE IS THE USA!!!! hTTP://3DXHOBBIES.COM
Posted on: 2/28/2009 2:14 AM by Author "Furyflyer2"
in the forum "3D Electric Flying!"
http://www.rcuniverse.com/forum/fb.asp?m=8527106
RE: Mechanical Retract Dilemma
RETRACT ARE FINNALY IN I HAVE 100'S OF THEM AND WILL BE FILLING ALL THE ORDER THIS WEEK!!!!!!! Put "RCU" in the user notes at time of check out for free shipping. You can find them here- http://www.3dxhobbies.com/Mechanical_Retract_Main_Gears_2_PC_SET_p/buz4060.htm
Posted on: 9/10/2008 11:42 AM by Author "Furyflyer2"
in the forum "Questions and Answers"
http://www.rcuniverse.com/forum/fb.asp?m=7939940
RE: Mechanical Retract Dilemma
GREAT NEWS!!!!! I finally have a new supplier and PLENTY of retract do in by end of the month!!!! Sorry it has taken 4-ever, but they will be worth the wait.
Posted on: 7/10/2008 1:29 PM by Author "Furyflyer2"
in the forum "Questions and Answers"
http://www.rcuniverse.com/forum/fb.asp?m=7715246
RE: Mechanical Retract Dilemma
I'm sorry guys! i have been very busy with manufacturing the Airfoilz planes and the guy I had producing the retract totally screwed me and I'm still in search of a new manufacture source. I have no ETA, but I'm try hard to get them made.
Posted on: 5/14/2008 8:16 PM by Author "Furyflyer2"
in the forum "Questions and Answers"
http://www.rcuniverse.com/forum/fb.asp?m=7496861
RE: Mechanical Retract Dilemma
Just a update, the retract are in production, I'm hoping this new machinist will keep them coming and we can keep them always in stock. So we are looking mid march.
Posted on: 2/28/2008 4:25 PM by Author "Furyflyer2"
in the forum "Questions and Answers"
http://www.rcuniverse.com/forum/fb.asp?m=7151458
RE: Airfoilz RCU Extra 260
It is, they both are awsome planes!
Posted on: 2/25/2008 10:05 AM by Author "Furyflyer2"
in the forum "3D Electric Flying!"
http://www.rcuniverse.com/forum/fb.asp?m=7133956
RE: Airfoilz Yak-54 full fuse!
Yes were will be at the WRAM show first floor. We had so many extra 260 sales that it cut into what we had packed and ready to bring to the show.
Posted on: 2/21/2008 8:41 AM by Author "Furyflyer2"
in the forum "3D Electric Flying!"
http://www.rcuniverse.com/forum/fb.asp?m=7112140
RE: Where to get a TMPro Kanta 46 v2?
The Katana 46 are in and I'm shipping monday!
Posted on: 2/21/2008 8:19 AM by Author "Furyflyer2"
in the forum "3D Flying!"
http://www.rcuniverse.com/forum/fb.asp?m=7112068
RE: Airfoilz Yak-54 full fuse!
Sold it a long time ago, now I drive a Infinity.
Posted on: 2/20/2008 9:22 AM by Author "Furyflyer2"
in the forum "3D Electric Flying!"
http://www.rcuniverse.com/forum/fb.asp?m=7106292
RE: Airfoilz Yak-54 full fuse!
You need a 20-20L size, at lest 180 watts-200 watts. I use to work at Tiny Tots, in the hobby section.
Posted on: 2/19/2008 8:26 AM by Author "Furyflyer2"
in the forum "3D Electric Flying!"
http://www.rcuniverse.com/forum/fb.asp?m=7100259
| 
