|
RE: SK ENGINES
I WILL OPEN THE HEAD AND THE BACK PLATE TO CHECK FOR DEBRIES.. JUST TO BE SURE.AND.WASH THE ENGINE WITH A LITLE FUEL ..AND I LL PUT RED RTV IN THE BOTTOM OF THE CARB...ALSO .. I WILL WORK THE ENGINE IN 5% NITRO DO I HAVE TO TAKE OUT ANY SIM FROM THE HEAD??? THE ENGINE IS FROM KANGEE ... DOES ANY ONE ALSO HAVE TORQE THE BOLTS SO NOT TO OVER STREES THEM WHEN I WILL BOLT AGAIN ?? DOES THEY NEED ANY LOCTITE ?? WHEN I WILL BOLT AGAIN ...( BLUE ONE...THAT IS NOT SO STRONG..)[8|][:D]
Posted on: 4/2/2009 11:59 AM by Author "GEORGE_32"
in the forum "Glow Engines"
http://www.rcuniverse.com/forum/fb.asp?m=8641690
RE: SK ENGINES
i just order a pits mufler from himodels...just for 16..us dollars + 6 for shiping....:P i will start breaking the engine with the mufler...i will use cooll power but added shell m castor oil ... it will be 13% cool power and 6% shell m .... total 19% oil with 5 % nitro ....i believe oil protect the engine for a small performance loss/// by the way this is not a high performance engine so who[:D] cares ...it does the job///.. and if i am happy i will buy the .80 [:D][8D] hello turk ....:)
Posted on: 3/31/2009 12:54 PM by Author "GEORGE_32"
in the forum "Glow Engines"
http://www.rcuniverse.com/forum/fb.asp?m=8634929
RE: SK ENGINES
i have the sk50 ..still in the box...i bought a super chipmunk 52 ( but maybe 60 ) and i am planing to buy the pits muffler from him modell but this is the problem ....as i know 2 stroke nitro motors have dificulty to stay idle upside down something that the 4 stroke dont have.. have any one from you ....put an sk upside down or almost upside down so the mufler goes directly under the fuselage for more scalle look... have you encounter problems with idling with this motor when is almost inverted??? thanks[8|]
Posted on: 3/29/2009 2:22 PM by Author "GEORGE_32"
in the forum "Glow Engines"
http://www.rcuniverse.com/forum/fb.asp?m=8628824
RE: SK ENGINES
[:D] i just order also a sk 50 engine for my new 40 size airplane...from what i have listen ... i believe that is a very good engine... starts with a flick..idles fine and dont quit as long as you have set it properly... consider this one ....you say the engine is heavy....you understand that this mean that the engine has alot of metal...wich means that its not...for a few gallons///(it cost more to produce it....) second...the light engines.. i wouldn buy ..a cheap engine that it will be light why?? because light alloys... must have the correct treatment that they rise the cost ,,... so cheap ...and light ...its difficult... something else... this baby can work on no nitro .wow!!! (cheap reliable torky engine with low nitro ,,, and its economic also...) in usa the nitro fuel is cheap... but in europe ...the nitro goes sky high....and you have to consider that in the long term...how much the hobby cost... and about the blades...it needs big blades because it dosnt like high rpm ... and you have problem with the long blade///... put a 3 blade/..[:)] [:)][:D]
Posted on: 2/26/2009 4:16 AM by Author "GEORGE_32"
in the forum "Glow Engines"
http://www.rcuniverse.com/forum/fb.asp?m=8519735
RE: New SV Gassers
HI I SHOP FROM UNITED HOBBIES....FOR MY TREX ECOPTER ....NOW I MA THINKING TO MOVE ON 160 MODEL AND TO USE A 26CC GAS ..... WHAT IS YOUR OPINION SV OR SPE??? THEY BOTH ARE CHEAP ....BUT WHICH ONE IS BETTER??? WAITING FOR YOUR REPORT WITH YOUR NEW ENGINE..IF ITS RELIABLE ///....WHY NOT AND THE SMALLER ....26CC :)
Posted on: 10/24/2007 10:30 AM by Author "GEORGE_32"
in the forum "Gas Engines"
http://www.rcuniverse.com/forum/fb.asp?m=6532093
RE: Long EZ owners( Mine Flies finally!!!)
HI !!! I AM THINKING TO BUY ONE 160 LONG EZ FROM AK AND I AM THINKING TO PUT A 26CC GAS ENGINE ..THAT AS I SEEN IT HAS THE SAME WEIGHT AS A 160 2S NITRO WHAT IS YOUR OPINION ??? HOW ITS THE FLIGHT CHARACTIKIS OF YOURS ??? HAVE YOU CONSIDER ON THE WING TO PUT 2 SERVO AND TO WORK THEM AS FLAP ELERON FOR BETTER LANDING SPEEDS OR FOR TAKE OFF I HAVE HEARD THAT IT NEEDS LONG RUNWAY... AND YOU HAVE TO KEEP THE NOSE UP TO MAKE LESS TAKE OF ROLL.. THANKS[8D][8D][8D]
Posted on: 10/10/2007 8:07 PM by Author "GEORGE_32"
in the forum "The Clubhouse"
http://www.rcuniverse.com/forum/fb.asp?m=6474906
RE: RichModels Works LTC ARF's
HI !! I AM thinking to buy the Long EZ 160 !! and put a 26 cc gas engine and not a 160 nitro ( the weight is close !! ) what is you opinion does it worth the try??? it has issues with nose or tail heavy?? i dont know but this model atract me very much!!! its diferent !!!![8D]
Posted on: 10/2/2007 1:54 AM by Author "GEORGE_32"
in the forum "ARF or RTF"
http://www.rcuniverse.com/forum/fb.asp?m=6438816
RE: WALKERA 60
JUST WANT TO SAY HELLO TO EVERY ONE!!!! AS I SEE THE WALKERA 60 FORUM IS VERY BIG!!![;)][;)][;)][:D][:D][8D][8D] KEEP FLYING ......I WILL BUY NOW THE WALKERA ARTF 60B TO FLY.....FOR 80 US ITS A STEAL HEY WHAT IS THE BEST MOTOR TO PUT I WAS WITH THE WALKERA 380 THEN I SWITCHED TO ALIGN 3550 FOR MY TREX AND I AM LOOKING FOR CHEAP RELIABLE MOTOR WITH NOT BIG KV RATING (FOR LONGER FLIGHTS) HAVE YOU FOUND A GOOD MOTOR FOR THIS HELI?? THANKS GEORGE[:D][:)][8D][8D][8D]
Posted on: 8/27/2007 6:23 AM by Author "GEORGE_32"
in the forum "Walkera Helis - Dragonfly, etc.."
http://www.rcuniverse.com/forum/fb.asp?m=6292183
RE: WALKERA 60
WELL THIS IS THE BEST HELI !!!![:D][:D] I WILL BUY ALSO A PICO HELI ..... BECAUSE HOVERING MY TREX IN MY ROOM IN 1 METER X 1 METER IS NOT SO MUCH SPACE AND I DONT HAVE MUCH FUN BECAUSE I NEED TO BE VERY CARFULL ... [:@][:@][:@] FOR ROOM FLING I NEED THE PICO OR SOME WALKERA 5 COAXIAL???[8|] THANKS
Posted on: 12/23/2006 1:00 AM by Author "GEORGE_32"
in the forum "Walkera Helis - Dragonfly, etc.."
http://www.rcuniverse.com/forum/fb.asp?m=5151043
RE: WALKERA 60
hello!!!!! some info ....... well my trex flying perfect ....so good stability!!![:D][;)][;)][:)] and the gyro 401....[:D][:D][:D][:D] its fantastic!!!!!! whatever you fly....make a christmas gift and buy just the gyro ....its perfect ... but some more info about the walkera ruder servo....yes the 7.6 H ....its very very fast!!!! i found about it ...it has 0.09 spead,....like hs50 hitec ( or i think the hs 50 has 0.10) I AM ALREADY VERY HAPPY...AND IT LOOKS GOOD SERVO... its working in my trex perfect but if you want a digital servo for the walkera ...-trex there is a cheap and good one !!!! HDS-577 for 30 us dollars... AND HAS GOOD REPORTS!!!!! FROM (HELIDIRECT) SOMETHING MORE DONT BUY ALIGN 6 GRAMM SERVO ( I BOUGHT 6X ) FOR THE TAIL OF WALKERA AND BURND OUT IN A FEW FLIGHTS (SMALER AND LES POWER THAN THE WALKERA 7.6H)
Posted on: 12/14/2006 2:15 PM by Author "GEORGE_32"
in the forum "Walkera Helis - Dragonfly, etc.."
http://www.rcuniverse.com/forum/fb.asp?m=5115895
RE: WALKERA 60
HI!!! WELL WHAT I CAN SAY ....THE NEW HELI IS SUPER (COPTERX) ......I WISH I KNEW ABOUT THIS BEFORE[&:] AND YES AN EXPENSIVE HELI NEEDS ALSO QUALITY SERVOS.....[:D] I HAVE STARTED TO THINKING TO UPGRADE MINE ...BUT WAIT...[:D][:D][:D] I WILL WAIT FOR MY FIRST CRASH TO MAKE THE UPGRADE[:D][:D][:D][X(][;)] LOLOLOLOLOLOL SONNEBEE HAVE GOOD FLIGHTS!!!!!!
Posted on: 12/9/2006 12:00 PM by Author "GEORGE_32"
in the forum "Walkera Helis - Dragonfly, etc.."
http://www.rcuniverse.com/forum/fb.asp?m=5094191
RE: WALKERA 60
if i knew about this baby (copter x ) i wouldnt buy the t-rex cde because for the 50 us more you buying the (CLone t-rex se) with motor and esc!!!!![8|][8|][8|][8|][8|] AND THE MATERIALS ARE VERY GOOD !!! HOW IT FLYING????? THANKS[:D][8D][8D]
Posted on: 11/25/2006 7:25 AM by Author "GEORGE_32"
in the forum "Walkera Helis - Dragonfly, etc.."
http://www.rcuniverse.com/forum/fb.asp?m=5036442
RE: WALKERA 60
YES I KNOW....[:(][:@][:@] BUT I HAD PROBLEMS FROM THE SHOPS THAT THEY DIDNT WANTED TO SEND IT TO GREECE.....I ONLY FOUND 2 STORES....PLUS THAT THE ORIGINAL SITE (ALIGN.COM.TW) DOESNT HAVE IT ..////CREATED CONS TO BUY SOMETHING THAT THE OFFICIAL ALIGN DOES NOT HAVE[:D] BUT ...I MAY BUY THE UPGRADE OF THE FRAME,,,,\ BY THE WAY I LOVE THE FRAME OF WALKERA.... I JUST MADE A SMALL CONVERSION AND NOW THE 2200 MAH BATTERY FITS ALL THE WAY IN TO THE FRAME WITH PERFECT BALANCE FOR THE HELI...... AND THIS BATTERY I DONT KNOW HOW I WILL MANAGE TO FIT IN THE SMALL TRAY.....OF T-REX .....I NEED THE EXTENSION FOR BATT[8|][8|] HAVE EVERY ONE A GOOD DAY....[8D][:D][8D][8D]
Posted on: 11/22/2006 11:56 PM by Author "GEORGE_32"
in the forum "Walkera Helis - Dragonfly, etc.."
http://www.rcuniverse.com/forum/fb.asp?m=5029188
RE: WALKERA 60
GOOD MORNING!!!! [:D] I AM WORKING NOW ON MY T-REX ......BUT I ALSO FIX MY WALKERA ..AND DID YOU SEE THE VENOM NIGHT RANGER XL??? ITS A WALKERA 60 WITH LARGER TAIL BOOM .... SO I WILL BUY A T-REX BOOM + A BELT AND TRY TO PUT IT WORK TOGETHER..... BY THE WAY THE T-REX HAS SOME FOULS THAT I DONT LIKE ... FOR EXAMPLE\: IT USES OTHER GEAR TO GIVE THE TRANSMISION TO THE REAR (MORE THINKS TO BE AWARE ) ALSO IT DOESNT HAVE A DIRECT CCPM LIKE WALKERA... [:)] I ALSO BOUGHT THE FUTABA 401.....SO I EXPECT MORE STABLE FLIGHTS...:))))[:D][:D][:D]
Posted on: 11/21/2006 11:48 PM by Author "GEORGE_32"
in the forum "Walkera Helis - Dragonfly, etc.."
http://www.rcuniverse.com/forum/fb.asp?m=5025490
RE: WALKERA 60
WELL I DID IT AGAIN.....[:D][8|][X(] I FOUND THIS SITE ABOUT THE E-SKY CP BELT (www.rcgroups.com/forums/showthread.php?t=569550) AND FROM THE DATE IS NEW ....IN THE 50 PAGES ....I CAN SAY THAT THIS HELI IS A T-REX -X MODEL WITH THE MECHANICAL LINKAGE... BUT WITH THE HEAD OF THE 60.... BUT WITH BEARINGS...CAN I SAY (BETTER QUALITY??) ANYWAY THE FACT IS BECAUSE CHRISTMAS ARE CLOSE...A SAID TO MY SELF I NEED A GIFT AND I BOUGHT A TREX CDE BECAUSE I COULDNT TALK WITH THE HELIHOBBY THAT THEY SELL THE T-REX SA SO FOR 225 SHIPD TO GREECE,.... I BOUGHT A T-REX (ANASSEMBLED) WITH 325 FIBER +ALIGN 430L MOTOR 3550KV + THE ALIGN 25G ESC (WHO CARES[:'(][:'(] I HAVE THE 35X )[:D] SO NOW I WILL HAVE 2 HELIS[:D][:D][:D][:D][:D] REASON : THE METAL UPGRADE FOR T-REX TAIL AND HEAD DROPED TO 100US ..... AND THERE ARE TONS OF UPGRADES.... SO I WILL HAVE THE T-REX AND THE WALKERA FOR BACK UP ...BY THE WAY WALKERA FLY VERY WELL!!!![:D]
Posted on: 11/8/2006 3:43 PM by Author "GEORGE_32"
in the forum "Walkera Helis - Dragonfly, etc.."
http://www.rcuniverse.com/forum/fb.asp?m=4971243
RE: WALKERA 60
NO .. I DONT THINK I AM SO LUCKY ..BECAUSE I USED A UBEC TO GIVE POWER TO THE RX (9DP)AND I AM USING THE ESC JUST TO SENSE THE THORTLE INPUTS+POWER TO MOTOR I BELIEVE THAT THE SYSTEM DOES NOT OVERLOAD ( MY ESC DO NOT EVEN WARM UP !!!) I HAVE HE ALIGN 35X MODEL SO THATS WHY I DONT HAVE GLITCHES I HAVE STEADY 5 VOLT AND THE MOST IMPORTANT IT GIVES UP TO 3 AMP WITH PEAK 5 AMP TO MY SERVO (WHEN FROM THE ESC YOU ARE ASKING TO GIVE 12XXX AMP TO THE MOTOR PLUS STEADY V AND AMP TO THE SERVO THEN HEAT CREATES = AND THE PROBLEMS STARTS..... THE ONLY THING THAT WORM UP IS THE WALKERA 380 BUT NOT SO MUCH ( I CAN TOUCH IT I AM USING HEATSINK ,...AND THE BATTERY!!!).... SO THIS IS MY THEORY !!! I BELIEVE THAT WITH A REGULAR RX THAT ITS WORKING WITH A UBEC ( OF THE 13 US DOLLARS VALUE) I DONT HAVE THE PROBLEMS THAT A LOT OF PEOPLE HAS .... AND IF THERE IS ANY OTHER JUST SAY SO /..... BEFORE TO BUY THE HELI THE BIGEST PROBLEM AND THINKING WAS THE GLITCHING!!!!!! FERITE AND WHAT EVER ELSE WAYS TO MINIMIZE THE PROBLEM .... AND TO GIVE YOU HOW MUCH I WAS AFRAID ( BECAUSE THIS IS NOT THE CASE OF AN AIRPLANE THAT A SERVO GLITCES AND YOU DONT LOSE CONTROL!!!) BEFORE PUT THE RADIO I CHANGE THE SKIDS ( FROM THE LEFT THAT IT WAS THE HOLES FOR THE TUBE OF ANTENA TO THE RIGHT...) SO THE ESC TO BE ON THE OTHER SIDE PLUS I WAS TRYING TO FIND A WAY TO PUT THE RX IN THE BACK SIDE SO NOTHING TO BE CLOSE TO NOISE AREA AS THE MOTOR ...ETC... THE ONLY THING THAT STAID WAS ONLY THE SKIDS ( DIDNT WANT TO CHANGE AGAIN) BECAUSE I DIDNT HAD ANY GLITCHES!!! SO ALL THIS TROUBLE ..(FERITE RING, REWIRING, AND WHAT EVER CRAZY STUFF MAY BE STUPID AND ALL IS JUST A UBEC OF 13 US ......THAT MADE MY LIFE EASY... PLEASE IF ANY ONE USING UBEC AND DOES NOT HAVE GLITCES ALSO JUST SAY IT IT MAY BE THE SOLUTION !!!!!!
Posted on: 10/30/2006 10:05 PM by Author "GEORGE_32"
in the forum "Walkera Helis - Dragonfly, etc.."
http://www.rcuniverse.com/forum/fb.asp?m=4935820
RE: WALKERA 60
I AM TALKING FOR THE ESKY 14D YELLOW OR THE ESKY 13C WHITE ....(BELT DRIVE) AS I FIGURE IT USE 315 MM MAIN BLADES...
Posted on: 10/30/2006 9:32 PM by Author "GEORGE_32"
in the forum "Walkera Helis - Dragonfly, etc.."
http://www.rcuniverse.com/forum/fb.asp?m=4935623
RE: WALKERA 60
hello!!! well i dont have any doubt that the metal upgrade is better but i found an add for this heli for 93.80 us IN WWW.HOBBY-ESTORE.COM still waiting for reply it looks to me that is a biger walkera..... and to be honest is like the new t-rex sa ....(200 us ) if you remeber the t-rex sa that has a new head that is like walkera (direct eccpm) and from the video that i show the heli was flying with no metal head just stock so its very capable....even if we are no capable to fly like that ..... i will give it a try....also!!![:)]
Posted on: 10/28/2006 6:36 PM by Author "GEORGE_32"
in the forum "Walkera Helis - Dragonfly, etc.."
http://www.rcuniverse.com/forum/fb.asp?m=4926350
RE: WALKERA 60
I CANT HEAR FOR THE DX7.DX6 OR THE DX9 ...[:'(][:'(] I HAVE THE 9CHPS ON 58 CHANNEL!!! 72.950 AND I DONT HAVE A CLUE WHAT GLITCH IS... AND WHEN I WAS SETING UP THE HELI..I HAD PUT THE ANTENNA ROUND THE METAL FRAME OF THE HELI!!!!!! AND STILL DIDNT HAD ANY GLITCH!!! I AM NOT SO LUCKY.....[:D] AND SOMETHING MORE I MADE A WILD TEST THAT PROVE TO ME THAT THE RADIO IS VERY GOOD I OPEND THE RADIO WITH THE HELI IN THE LIVING ROOM I LEFT FROM THE HOUSE I LEFT THE DOOR OPEND AND WENT ONE FLOOR DOWN !!!! WITH NO VISSUAL I COULD HEAR THE SERVO MOOVING WHEN I WAS APLYIED INPUTS IN THE STICK AND NO GLITCING!!!!![8D][8D][X(][X(] THIS IS MY FIRST SERIOUS RADIO....THE OTHER WAS SOME AM MADE FROM RCM 1970-71 BUILD (MY FATHER WAS FLYING ....AND YES IT WAS GLITCHING ALL THE TIME ....I STILL REMEBER THE GLITCH IT WAS LIKE DANCING TO DISCO[&:][X(][X(][X(] AND THE OTHER ONE WAS THE WALKERA ON 35.120 MHZ AND ALSO NO GLITCH!!! ALSO !!! I JUST SOLD IT ONLY BECAUSE I BOUGHT THE 9CHPS AND GUES I BOUGHT THE 9CHPS FOR HOW MUCH??? 350 THE TX +RX + THE CAP 232EP = 409 US SHIPED TO GREECE FROM EBAY (BRAND NEW) BUT WHAT IS THE CLUE??? I HAVE A GOOD TX THAT I CAN USE IT TO AIRPLANES , HELIS AND WHAT EVER ...SO I AM NOT STUCKED TO A BACKFLYER RADIO ...THAT I CAN NOT USE IT TO WHAT EVER ELSE [;)][;)][;)] THAT IS MY OPINION SOME TIMES CHEP THINGS COST MORE THAN SOMETHING MORE EXPENSIVE
Posted on: 10/28/2006 6:01 PM by Author "GEORGE_32"
in the forum "Walkera Helis - Dragonfly, etc.."
http://www.rcuniverse.com/forum/fb.asp?m=4926237
RE: WALKERA 60
[X(][X(] I WAS SURFUING IN THE INTERNET AND I FOUND THE SITE WWW.RCMODS.CO.UK but go to the model E-SKY BELT-CP I THINK 14D THE YELLOW ONE and SEE THE VIDEO !!!!! AND LOOK THE HEAD AND THE TAIL ....!!!! ITS THE SAME AS WALKERA!!! 60 .... so i imagine what this heli can do in the hands of a pro...[:D][:D][8D][8D] i am waiting for the parts to fly again soon..[:D][:D]
Posted on: 10/27/2006 9:24 PM by Author "GEORGE_32"
in the forum "Walkera Helis - Dragonfly, etc.."
http://www.rcuniverse.com/forum/fb.asp?m=4923270
RE: WALKERA 60
[:@][:@][:(][:(][:(][:(] HELLO....I JUST CRASHED MY HELI YESTERDAY ....ALL THIS DAYS I WAS HOVERING MY HELI IN MY BEDROOM WITH A FLYING SPACE OF 1,5 X 1,5 METERS.... AND BECAUSE I WAS FELLING COFIDENT FOR MY SKILS I START TO FLYING HIGH AND LOW SO I LOST CONTROLL AND I CRASH IT ( NEED THE NEW ALUMINIOUM HEAD PLUS THE TAIL )[:D][:D][:D][:D] WELL I WAS THINKING TO BUY THE NEW HEAD AND TAIL UPGRADE BUT NOW I NEED TO FLY AGAIN..[X(][:'(][:@][:@] SO WHAT YOUR OPINION FROM THE NEW HEAD DOES IT MAKE MORE STABLE THE HELI??? ALSO THE NEW TAIL HAS LONGER TAIL BOOM??? SO I CAN PUT 315 ALIGN BLADES?? THANKS[:D][:D]
Posted on: 10/25/2006 5:48 PM by Author "GEORGE_32"
in the forum "Walkera Helis - Dragonfly, etc.."
http://www.rcuniverse.com/forum/fb.asp?m=4914363
RE: WALKERA 60
I HAVE THE SAME BATTERIES THAT YOU HAVE SONEEBE BUT I MADE CONVERSION TO THE CHASIS AND IT FITS FIRMLY ALL INSIDE (IT STOPS IN THE BACK THAT ITS THE SAFT HOLDER...) I WILL PUT PICTURES BECAUSE ITS PERFECTLY BALANCED!!! AND ITS SOMETHING THAT WALKERA HAS TO MAKE TO THE NEW MODELS IT DONT TAKE MORE THAN 10-15 MIN OF WORK...[8D][8D]
Posted on: 10/18/2006 11:48 PM by Author "GEORGE_32"
in the forum "Walkera Helis - Dragonfly, etc.."
http://www.rcuniverse.com/forum/fb.asp?m=4886549
RE: WALKERA 60
hello .!!![:)] i just want to ask if the full metal upgrade has biger tail bom... or just buy an align HL tail boom with the belt that it have?? they just send me coupon for 30 us cut total 59 us ....and i am going to buy it but if its longer i can put my 315 align blades that i mistakenly bought it...[&:][&:][&:][:D][:D] well buy the way from a crash i will need to replace all these ..... also some thing more!!! the new t-rex sa model !!!! well this heli has direct eccpm like walkera.... strange isnt it ...[:'(][:'(] who is coping who????[:D][:D][:D] the new t-rex looks like a biger walkera....[X(][X(] but it costs 200 us....... with out anything (arf)[:)]
Posted on: 10/18/2006 11:39 PM by Author "GEORGE_32"
in the forum "Walkera Helis - Dragonfly, etc.."
http://www.rcuniverse.com/forum/fb.asp?m=4886513
RE: WALKERA 60
DONT PUT STEEL PINION THE BRASS IS FOR THIS REASON .....(IT WEARS AND YOU JUST REPLASE IT THE STELL WILL STRIP YOUR GEAR SEE WHAT YOU HAVE TO PAY AND ALSO WHAT YOU HAVE TO REMOVE TO PUT ANOTHER ONE!!!![:D][:D][:D][8D]
Posted on: 10/13/2006 11:25 PM by Author "GEORGE_32"
in the forum "Walkera Helis - Dragonfly, etc.."
http://www.rcuniverse.com/forum/fb.asp?m=4865421
RE: WALKERA 60
something more DONT BUY ALIGN 6X SERVO (FOR THE TAIL ITS WORST THAN THE WALKERA) I TRY EVERY WHERE TO FIND SOMETHING ABOUT THE ALIGN 6X (5-6 GRAMM) BUT I COULDNT FIND AND I BOUGHT IT WELL ITS A PIECE OF CRAP (ITS NOT SO STRONG PLUS ITS NOT FASTER THE GYRO WORKED WORST!!!!) ALSO I CHARGED THE FIRST 3 TIMES MY BATTERIES TO .3C AND NOW I AM CHARGING AT .5C IF YOU GO TO BATTERIESUNIVERSITY THEY HIGLY RECOMEND SLOW CHARGE FOR MORE LIFE IN THE BATTERIES,,,.[:D][:D][:D][8D]
Posted on: 10/5/2006 4:07 PM by Author "GEORGE_32"
in the forum "Walkera Helis - Dragonfly, etc.."
http://www.rcuniverse.com/forum/fb.asp?m=4832357
RE: WALKERA 60
i have the bantam bc5 lipo balancer charger that charges nimh.,nicd and pb batteries up to 5 amp but the most important !!! it has lipo balance mode included!!!! i am very hapy go to www.bantamtek.com.tw well you can find it for 120 us dollars..in ebay but its a good charger....
Posted on: 10/5/2006 3:58 PM by Author "GEORGE_32"
in the forum "Walkera Helis - Dragonfly, etc.."
http://www.rcuniverse.com/forum/fb.asp?m=4832317
RE: WALKERA 60
GO TO THE SITE: WWW.TREXTUNING.COM THEY HAVE A NICE REVIEW FOR 3 LIPO BRUSHLESS MOTORS AND FOR 4 LIPOS I THINK THE WINER IS THE 450 TH LOOK IN THE REVIEW [8D][8D][8D]
Posted on: 10/5/2006 3:50 PM by Author "GEORGE_32"
in the forum "Walkera Helis - Dragonfly, etc.."
http://www.rcuniverse.com/forum/fb.asp?m=4832289
RE: WALKERA 60
HI !! I HAVE ALREADY DONE THAT !! I JUST HAVE NOT YET TAKE PHOTO TO PUT IN THE SITE TO HELP OTHER PEOPLE.... NO I JUST BOUGHT SAME DIMENSION SCREW BUT TENSION (ROUNDED) THE HEAD IS SMALLER THAN THE OTHERS AND NOW ITS UP SIDE DOWN THE (HEAD TO THE CHASISS AND THE NUT UP (SELF LOOKING) (MORE ROOM ) BY THE WAY I DIDNT SEE ANY DIFERENSE WITH ALIGN 6X SERVO SAME SPEED AND WORST PULLING POWER FROM THE WALKERA ...[8|][8|][:'(][:'(][:'(] I WILL TRY THE SG50 FROM TOWER PRO...I HOPE IT WILL BE BETTER ... FOR THE SAME PRICE I CAN BUY 3-4 SG50 IN COMPARISON TO 1 HITEC HS50[&o][&o][&o][:)][:D] IS ANYBODY HAPPY WITH SG50 FOR TAIL?? HEY SONEEBE ARE YOU HAPPY??? WITH THE SG50??? I THINK I HAVE TO BUY ALSO A SERVO TAIL HOLDER IT WILL HELP MORE...:)[8D] WITH THE FRICTION THAT CREATES THOSE LINKS CAN I PUT SOME OIL FOR LESS FRICTION??? ALSO WHAT KIND OF OIL ( LUBRICANT YOU PUT IN THE MAIN SAFT???) THANKS!!!![8D][8D][8D][8D][8D]
Posted on: 10/3/2006 10:23 AM by Author "GEORGE_32"
in the forum "Walkera Helis - Dragonfly, etc.."
http://www.rcuniverse.com/forum/fb.asp?m=4822440
RE: WALKERA 60
HI!! well i bought for tail servo the align 6x (6 gramm) for 11 us anyway does any one knoes how faster or slower is from tower pro sg50 ??? has anybody used it??? [8D][8D][8D][8D]
Posted on: 10/2/2006 12:58 PM by Author "GEORGE_32"
in the forum "Walkera Helis - Dragonfly, etc.."
http://www.rcuniverse.com/forum/fb.asp?m=4818389
RE: WALKERA 60
I BOUGHT THE 9CHPS AND NOW I AM VERY HAPPY WITH IT ITS VERY FRIENDLY AND CAN MEKE EVERYTHING EXEPT CAFE [:D][:D][:D][:D] AND WITH THE UBEC FROM HELIDIRECT I USE THE 9DP RX ....NO GLITCHES!!!!!!! YOU HAVE SO MANY TX DONT SPEND YOUR MONEY JUST BUY WHEN YOU CAN I GOOD ONE FOR ALL YOUR MODELS!!!
Posted on: 10/2/2006 10:31 AM by Author "GEORGE_32"
in the forum "Walkera Helis - Dragonfly, etc.."
http://www.rcuniverse.com/forum/fb.asp?m=4817887
| 
