|
RE: RB classico 10???
[quote]ORIGINAL: D.DJ Nice stuff, but the Michael Slaven's name is actually Michael SALVEN, unless there is a guy named Slaven. German dude, Head Honcho of Serpent? Still sweet stuff you've got going on there! Im getting the RB T10 for my RRR in a few weeks, cant wait to get it! [/quote] LOL I thought it was spelled like that, and yeah I too can't wait...... Getting a RB touring10 for your RRR is a good look too.
Posted on: 9/13/2010 2:58 AM by Author "Ghase"
in the forum "Car Nitro & Gas Engines"
http://www.rcuniverse.com/forum/fb.asp?m=9998278
RE: RB classico 10???
Well I got the TKO ceramic bearing in the mail today and I took so pics of both my Mugen mtx 3 with modded Michael Slaven Nova Mega sx .12 3port turbo motor and my Mugen mrx4x.... Both Mugen's together
Posted on: 9/11/2010 12:32 AM by Author "Ghase"
in the forum "Car Nitro & Gas Engines"
http://www.rcuniverse.com/forum/fb.asp?m=9994082
RE: RB classico 10???
[quote]ORIGINAL: D.DJ You dont have to send it off to anyone to replace the bearings, all you need is an oven! Just heat it up to 200 deg celsius and up, put just the crankcase with the bearings (of course) and let it sit in there for a while. Once it's heated up, all you do is tap out the bearings! Some require a little work, but usually a tap is all it needs. Once they're out, stick the case in again to heat it up so the seats expand again, then put the bearings in again - with the main bearing, put it in while its on the crankshaft so it goes straight in, the outer bearing isnt hard to put in. Let it cool and that's it! Ive never had a problem doing that to any engine. Just lube it up a little and its good to go. [/quote] LOL were so old school, I used a heat gun with a small piece of wood to tap it out....... I know how to get them out, but I talked to Jake from Voodoo mods and he'll do it for free when the other work is done...
Posted on: 9/3/2010 11:15 PM by Author "Ghase"
in the forum "Car Nitro & Gas Engines"
http://www.rcuniverse.com/forum/fb.asp?m=9979344
RE: Nova Flash .12 Tuned Vs RB M3 Vs Sirio XXX and others.
Not for nothin I use to race 1/10 class with a serpent 705 and a mugen mtx3 and the Hottest motors back then was the Nova Mega and the RB .12 5port engines, and I just seen a Nova Mega 5port on Ebay going for $259....... Those were Kings in my day back when I was running a modded Michael Slaven Nova Mega sx .12 3port turbo in my Serpent and Mugen, but I was right with them. But if anything just get the RB M3 or opp for that crazy Novarossi Flash 5 port turbo($$$). You can't go wrong with either one, and remember your coming from a Picco.....
Posted on: 9/3/2010 11:08 PM by Author "Ghase"
in the forum "Car Nitro & Gas Engines"
http://www.rcuniverse.com/forum/fb.asp?m=9979334
RE: RB classico 10???
Well I did some research and found out the RB C5 motors have the same crank & bearing (confirmed stock numbers that also relayed to a size for the bearing)....... So I ordered TKO F/R ceramic bearing for my Classico 10. When they come, it's off to VooDoo!!!!!!!!! My mrx4x should be killer with the motor......
Posted on: 9/3/2010 3:30 PM by Author "Ghase"
in the forum "Car Nitro & Gas Engines"
http://www.rcuniverse.com/forum/fb.asp?m=9978588
RE: RB classico 10???
Yeah the I got the motor for a good price, so later I'll be sending it off to Voodoo mods for a little port & polish and maybe change the bearing to ceramic.... Oh I can't wait!!!! I found this on youtube http://www.youtube.com/watch?v=RevaJciGiNA
Posted on: 8/30/2010 11:47 AM by Author "Ghase"
in the forum "Car Nitro & Gas Engines"
http://www.rcuniverse.com/forum/fb.asp?m=9969225
RE: RB classico 10???
Thanks D D.J. I just got back from Jamaica and I seen your post. So yeah I also just said fuk it and ordered the motor from Tower hobbies and used a $50 off coupon, so I got the motor for $209 dollars shipped.....!!!!!
Posted on: 8/29/2010 8:39 PM by Author "Ghase"
in the forum "Car Nitro & Gas Engines"
http://www.rcuniverse.com/forum/fb.asp?m=9967936
RE: RB classico 10???
Guys any help on this??? Have your own suggestion for a on road motor, just let me know...
Posted on: 8/22/2010 6:29 PM by Author "Ghase"
in the forum "Car Nitro & Gas Engines"
http://www.rcuniverse.com/forum/fb.asp?m=9952466
RB classico 10???
I plan to use this motor in my Mugen MRX4x and have it modded by AB mods or Voodoo, so does anybody have any experience with this motor??? It looks like it has a little potential to be a killer...lol Thanks James
Posted on: 8/19/2010 8:21 PM by Author "Ghase"
in the forum "Car Nitro & Gas Engines"
http://www.rcuniverse.com/forum/fb.asp?m=9946114
RE: Novarossi 5XLT vs Plus 4 vs Werks B5
I can see in the future that .28 engines will be no longer in the truggy class...... Even I opted for a Hot Mods RB C6 T7 for my O'Donnell Z01-T and it has more than enough power for the track. But out of those motor I would choose the Novarossi 5XLT and the Werks B5 for a close second. I would go with the plus 4, it alittle down on power and rpm compared to the others.
Posted on: 1/4/2010 1:45 PM by Author "Ghase"
in the forum "Car Nitro & Gas Engines"
http://www.rcuniverse.com/forum/fb.asp?m=9386203
RE: mmgt3.0 throttle problem
Are you running the stock radio tx/rx???
Posted on: 1/4/2010 1:01 PM by Author "Ghase"
in the forum "Team Associated - Monster GT"
http://www.rcuniverse.com/forum/fb.asp?m=9386086
RE: Best pipe for MMGT 3.0?
DO yourself a favor and keep the stock pipe because it flows alot better then the revo pipe which makes for good top-end, plus it gives you decent low and mid-range power. I myself had the traxxas revo 5490 pipe that I just got sold on ebay because it was choking the hell out of my O.S. .18tz motor. I'm much happier mmgt pipe.....
Posted on: 11/5/2009 8:27 PM by Author "Ghase"
in the forum "Team Associated - Monster GT"
http://www.rcuniverse.com/forum/fb.asp?m=9231346
RE: Anyone Have a Mini MGT?
[quote]ORIGINAL: jermainezey that what its called a Monster - T its made by acme if u go to you tube and look up monster T u will see it heres the link [link=http://www.youtube.com/watch?v=s4pLwrTNHYc]monster T on you tube[/link] [/quote] WTF ?????? Delete post
Posted on: 10/22/2009 3:08 AM by Author "Ghase"
in the forum "Team Associated - Monster GT"
http://www.rcuniverse.com/forum/fb.asp?m=9192769
RE: Anyone Have a Mini MGT?
[quote]ORIGINAL: jermainezey that what its called a Monster - T its made by acme if u go to you tube and look up monster T u will see it heres the link [link=http://www.youtube.com/watch?v=s4pLwrTNHYc]monster T on you tube[/link] [/quote] I really don't trust those No name trucks, and I wouldn't put a .18tz in there either. The OS .18 tz makes phenomenal power (more power than most .21 sized big blocks), and I don't know if that Monster T drivetrain can handle it........ Plus what if something breaks???? What LHS are you going to???? Sorry not to hate or nothin, I thinks those china, taiwan, or japanese made eBay spec cars are a waste of time and money....... IMO
Posted on: 10/22/2009 3:06 AM by Author "Ghase"
in the forum "Team Associated - Monster GT"
http://www.rcuniverse.com/forum/fb.asp?m=9192787
RE: Anyone Have a Mini MGT?
[quote]ORIGINAL: jermainezey i have a monster t that am put in os 18tz engine in do any one know what maifold i will need to keep the muffler in the stock spot which is on the side of the truck [/quote] Whats Monster t????? Or do you mean mmgt????
Posted on: 10/21/2009 2:07 AM by Author "Ghase"
in the forum "Team Associated - Monster GT"
http://www.rcuniverse.com/forum/fb.asp?m=9190074
RE: Anyone Have a Mini MGT?
Also change the stock glow plug, because it seems like it comes bad already from the factory or either was made in china.
Posted on: 10/20/2009 11:59 PM by Author "Ghase"
in the forum "Team Associated - Monster GT"
http://www.rcuniverse.com/forum/fb.asp?m=9189884
RE: Anyone Have a Mini MGT?
[quote]ORIGINAL: MiniMGT3.0 hi im experiencing a problem when i accelerate the front wheels spin loosely as though they are not connected to the main drive shaft i have checked and tightened the grub screws [/quote] Read post 980, the hole is there so drill it out alittle, use lock tight and it works....... This is what we been talking about from page 39.
Posted on: 10/20/2009 9:56 AM by Author "Ghase"
in the forum "Team Associated - Monster GT"
http://www.rcuniverse.com/forum/fb.asp?m=9187800
RE: Anyone Have a Mini MGT?
[quote]ORIGINAL: MGTMONSTER whats a good breakin procedure? [:-] [/quote] LOL Normally I just let idle for 3-4 tanks (rich) with little throttle blimps in case it wants to cut off. Then on the 5th tanks I lean it out alittle and drive around (but taking it easy), and every gas tank after gets leaned some more. This will do for most motors but some with take longer than others. In fact in my Michael Salven Novamega .12 turbo in Mugen MTX-3 had done this process almost 3 times before it was broken in. My OS .18tz took some time but not as long as the Nova, but they both made some nice power once it finally did.....
Posted on: 10/20/2009 2:31 AM by Author "Ghase"
in the forum "Team Associated - Monster GT"
http://www.rcuniverse.com/forum/fb.asp?m=9187322
RE: Anyone Have a Mini MGT?
You know it, I probably spent $1k building it. And I just gave the diff cups a permanent fix, I drilled them alittle and add some locktight and she runs perfect...
Posted on: 10/15/2009 1:50 PM by Author "Ghase"
in the forum "Team Associated - Monster GT"
http://www.rcuniverse.com/forum/fb.asp?m=9175555
RE: Anyone Have a Mini MGT?
[quote]ORIGINAL: jermainezey told u one day u might have sum free time to drive it [/quote] Yeah its because you why I ran it.....lol
Posted on: 10/14/2009 11:58 PM by Author "Ghase"
in the forum "Team Associated - Monster GT"
http://www.rcuniverse.com/forum/fb.asp?m=9174371
RE: Anyone Have a Mini MGT?
[quote]ORIGINAL: MGTMONSTER Well i am glad that you decided to keep it sounds like you had a blast with it today cant wait to see the new pictures how did you break in your engine? [/quote] Yeah this truck kick ass, and tonight I'm charging to a larger 15/19 clutch bell. And the .18tz took real long to break in but once it did........
Posted on: 10/14/2009 11:56 PM by Author "Ghase"
in the forum "Team Associated - Monster GT"
http://www.rcuniverse.com/forum/fb.asp?m=9174368
RE: Anyone Have a Mini MGT?
Well I listen to you guys, and I realized I love this MMGT tooooo much. So I did some changes today on the truck. I first took off the Traxxas 5490 Revo tuned pipe because I believe it was choking my motor all across the OS .18tz power band (And I was dead on about). Next I took off the Integy shocks and finally installed the MGT 8.0 one per corner. So I was a little bored today and packed the truck up and headed to the beach............. And WOW the truck ran and handled so much BETTER, now it pulls right through the rpm without any hesitation and topend it runs twice as hard as the AE .18 motor. The only problem for the day as once again my truck has converted back to 2wd, which sucks but I still drove it and had a kick ass time doing power slides, drifts, and donuts!!!!!!!!!!!!! Will take some new pics also!!!!!!
Posted on: 10/14/2009 8:38 PM by Author "Ghase"
in the forum "Team Associated - Monster GT"
http://www.rcuniverse.com/forum/fb.asp?m=9173836
RE: Anyone Have a Mini MGT?
[quote]ORIGINAL: jermainezey do u have any pics of it [/quote] Well I think I posted this already but fck it......
Posted on: 10/7/2009 3:43 AM by Author "Ghase"
in the forum "Team Associated - Monster GT"
http://www.rcuniverse.com/forum/fb.asp?m=9153115
RE: Anyone Have a Mini MGT?
I too have had that same problem, it seems like everybody who upgraded their motor is having it too... interesting. Well at lease I don't have a problem with the dog bones, I have the factory team CVD's.
Posted on: 10/7/2009 3:36 AM by Author "Ghase"
in the forum "Team Associated - Monster GT"
http://www.rcuniverse.com/forum/fb.asp?m=9150223
RE: Anyone Have a Mini MGT?
[quote]ORIGINAL: jermainezey what size engine do u have in your mgt 3.0 [/quote] I have an OS .18TZ........
Posted on: 10/6/2009 2:36 AM by Author "Ghase"
in the forum "Team Associated - Monster GT"
http://www.rcuniverse.com/forum/fb.asp?m=9150317
RE: Anyone Have a Mini MGT?
[quote]ORIGINAL: jambafromhell what do u guys think about wheel extensions for handling [/quote] Handles real nice if you put on extenders, in fact I haven't flipped my truck ever since..... And do yourself a favor, keep the stock shocks......
Posted on: 9/22/2009 1:02 AM by Author "Ghase"
in the forum "Team Associated - Monster GT"
http://www.rcuniverse.com/forum/fb.asp?m=9114355
RE: Anyone Have a Mini MGT?
[quote]ORIGINAL: jermainezey [quote]Here's some more........ [/quote] are u using the stock wheel nut or do u have the 23 mm upgrade [/quote] I'm running Tmaxx wheel extenders that carry over the 14mm...... To make them fit you just sand it down by the axle pin hole.
Posted on: 9/22/2009 12:56 AM by Author "Ghase"
in the forum "Team Associated - Monster GT"
http://www.rcuniverse.com/forum/fb.asp?m=9114346
RE: Anyone Have a Mini MGT?
[quote]ORIGINAL: cal63look [quote]ORIGINAL: Ghase Here's some pictures of my truck........ [/quote] Your truck is awesome! Two thumbs up to you man. In all honesty with the aluminum parts do you think its beefier, meaning its pretty tough or does it feel like it will break? Are you running any factory parts like the FT pivot balls or anything like that? Do the integy parts have good fit
Posted on: 9/22/2009 12:52 AM by Author "Ghase"
in the forum "Team Associated - Monster GT"
http://www.rcuniverse.com/forum/fb.asp?m=9114336
RE: 4.6 or tmaxx?
I'd worked on Tmaxx's and Savage's (XL and X), and I've driven a MGT 8.0.................. Out of those three, I would pick a MGT 8.0 because of price and its the only that has a FM radio (has a 10 memory model as well). It's maybe not the best handling, one of the most toughest...........Guaranteed BTW I currently own a full metal mini MGT with an OS .18TZ, and both owners of the Savages wants to buy it off from me....
Posted on: 8/18/2009 12:41 PM by Author "Ghase"
in the forum "Team Associated - Monster GT"
http://www.rcuniverse.com/forum/fb.asp?m=9025552
RE: Diff issue on MGT 4.6?
Re-check the oils in the diffs, you may need a thicker oil in the back....
Posted on: 8/18/2009 12:27 PM by Author "Ghase"
in the forum "Team Associated - Monster GT"
http://www.rcuniverse.com/forum/fb.asp?m=9025520
| 
