|
RE: biggest raptor 30 engine?
bigger than os37 will over rev the engine in some cases.
Posted on: 1/21/2011 7:00 AM by Author "Ghostship"
in the forum "Thunder Tiger - Raptor 30, 50, 60, 90"
http://www.rcuniverse.com/forum/fb.asp?m=10277945
RE: Is the wakera 60 good for beginners?
look at the trex 450 clones
Posted on: 7/2/2010 9:54 PM by Author "Ghostship"
in the forum "Walkera Helis - Dragonfly, etc.."
http://www.rcuniverse.com/forum/fb.asp?m=9841463
RE: Where to get 'affordable' parts?
http://www.eboyztoyz.net/
Posted on: 2/19/2009 7:40 PM by Author "Ghostship"
in the forum "T-Rex heli"
http://www.rcuniverse.com/forum/fb.asp?m=8496083
RE: Where to buy a T-rex 450
do you have a good LHS they can be a great resource for info.
Posted on: 1/1/2009 7:21 PM by Author "Ghostship"
in the forum "T-Rex heli"
http://www.rcuniverse.com/forum/fb.asp?m=8307025
RE: trex 450 sa setup
The higher head speed sounds great its a lot faster than my raptor 30, but if i decide to slow it down will i loose tail control ? recommended settings for normal is T 0 80 100 p 35 50 95 is this good for basic sport flying?
Posted on: 12/31/2008 7:50 PM by Author "Ghostship"
in the forum "T-Rex heli"
http://www.rcuniverse.com/forum/fb.asp?m=8303698
RE: trex 450 sa setup
I put the 11 tooth on and its working good, after i get used to it I may go back th the 13 Thanks
Posted on: 12/29/2008 7:38 PM by Author "Ghostship"
in the forum "T-Rex heli"
http://www.rcuniverse.com/forum/fb.asp?m=8295997
RE: trex 450 sa setup
the kit came with 11, 13, & 15 tooth pinion gears so I am going to try the 11 Thanks
Posted on: 12/28/2008 7:34 PM by Author "Ghostship"
in the forum "T-Rex heli"
http://www.rcuniverse.com/forum/fb.asp?m=8291937
trex 450 sa setup
I set up my new 450 with the recommended pitch and throttle settings, on the first test the head speed seems a little to fast for basic test flying. is it ok to tone it down a little? should i adjust the pitch, throttle or both. 3550 kv motor 13 tooth pinion. thanks
Posted on: 12/28/2008 12:50 PM by Author "Ghostship"
in the forum "T-Rex heli"
http://www.rcuniverse.com/forum/fb.asp?m=8290686
trex 450 se gyro?
I am setting up a trex 450SA for sport flying with some new and used parts . do you think I could use my old JR G460T gyro? If yes does anyone have any set up tips.
Posted on: 12/23/2008 3:04 PM by Author "Ghostship"
in the forum "T-Rex heli"
http://www.rcuniverse.com/forum/fb.asp?m=8275254
RE: What should I get?
Get a raptor 50 titan, it will be all you need 90s are for the pros
Posted on: 11/20/2008 9:06 PM by Author "Ghostship"
in the forum "Thunder Tiger - Raptor 30, 50, 60, 90"
http://www.rcuniverse.com/forum/fb.asp?m=8167755
RE: Raptor 30 or 50?
the 3151s work good in my 30. but to slow for the tail use a 9254.
Posted on: 10/25/2008 9:30 PM by Author "Ghostship"
in the forum "Thunder Tiger - Raptor 30, 50, 60, 90"
http://www.rcuniverse.com/forum/fb.asp?m=8084680
RE: double link?
thanks[:)] i made some today they fit good. I won't be flying for a couple more days.. doing a crash rebuild[&o]
Posted on: 8/5/2008 6:00 PM by Author "Ghostship"
in the forum "Thunder Tiger - Raptor 30, 50, 60, 90"
http://www.rcuniverse.com/forum/fb.asp?m=7812600
s3151
what about fataba s3151 servos i am using them in all locations because they came with my radio i know i have to upgrade the tail. is there a good fataba tail servo for sport flying that costs less than the 9254? i have a stock 30 v2 tt39 gy401
Posted on: 8/3/2008 10:27 AM by Author "Ghostship"
in the forum "Thunder Tiger - Raptor 30, 50, 60, 90"
http://www.rcuniverse.com/forum/fb.asp?m=7802999
RE: double link?
i know there different, but can you cut down the regular link ends to make a double link end? i have a lot of extras and i don't want to place a order for one part.
Posted on: 8/3/2008 10:15 AM by Author "Ghostship"
in the forum "Thunder Tiger - Raptor 30, 50, 60, 90"
http://www.rcuniverse.com/forum/fb.asp?m=7802965
double link?
Has anyone made there own double links or do you just buy new ones ?
Posted on: 8/3/2008 8:52 AM by Author "Ghostship"
in the forum "Thunder Tiger - Raptor 30, 50, 60, 90"
http://www.rcuniverse.com/forum/fb.asp?m=7802785
RE: Wish me luck guys..
good lick....... good luck.....Video??
Posted on: 7/13/2008 7:52 PM by Author "Ghostship"
in the forum "Thunder Tiger - Raptor 30, 50, 60, 90"
http://www.rcuniverse.com/forum/fb.asp?m=7727080
RE: Non heli engine
can I have your old tt39? I love 39s they run great ounce you learn how to tune them.
Posted on: 7/13/2008 7:49 PM by Author "Ghostship"
in the forum "Thunder Tiger - Raptor 30, 50, 60, 90"
http://www.rcuniverse.com/forum/fb.asp?m=7727072
RE: Installing the Futaba GY401 Gyro
You didn't say what heli you have. I have raptor with gy401 and futaba 7c. I found all the setup info at raptortechnique.com
Posted on: 5/5/2007 9:11 PM by Author "Ghostship"
in the forum "RC Helicopter General Discussions"
http://www.rcuniverse.com/forum/fb.asp?m=5815652
RE: Woodies covering
I hear you about the CF blades they will be coming soon, but I want more practice on the woodies first thanks.
Posted on: 5/1/2007 7:34 PM by Author "Ghostship"
in the forum "Thunder Tiger - Raptor 30, 50, 60, 90"
http://www.rcuniverse.com/forum/fb.asp?m=5798373
RE: Woodies covering
Another Q on covering. My covering is damaged, can I remove it and paint the blades or do I need new blades? Thanks
Posted on: 5/1/2007 5:57 PM by Author "Ghostship"
in the forum "Thunder Tiger - Raptor 30, 50, 60, 90"
http://www.rcuniverse.com/forum/fb.asp?m=5797912
RE: Control line at Disneyland
wow what a great thread. I never made it to disney when I was a kid but I did have a cox P40 warhawk. I can remember my father starting it at the kitchen table (he did everything at that table) then he would take it outside so I could try to fly it. I would plant the cone in the dirt before I made it ounce around. I'm trying my hand at helicopters now but I would like to find a old p40 for my collection.
Posted on: 3/18/2007 6:57 PM by Author "Ghostship"
in the forum "Control Lines"
http://www.rcuniverse.com/forum/fb.asp?m=5580860
RE: Raptor pics
[quote]ORIGINAL: CobraZb All you guys have me beat, my 30 is currently just a frame with a fuel tank and clutch. I am so excited though. [:D][:D] [/quot Pic of my new (Used) rappy 30 v2[:D]
Posted on: 2/18/2007 9:20 PM by Author "Ghostship"
in the forum "Thunder Tiger - Raptor 30, 50, 60, 90"
http://www.rcuniverse.com/forum/fb.asp?m=5438731
RE: Need Help tt-39
Thanks Barr, I will do that if I can find someone local. guick update I have been reading "raptor technique" and it has helped alot. I cleaned out the fule tank and installed a new os 8 plug , runs good now. one step closer to hover thanks again.
Posted on: 2/6/2007 8:17 PM by Author "Ghostship"
in the forum "Thunder Tiger - Raptor 30, 50, 60, 90"
http://www.rcuniverse.com/forum/fb.asp?m=5381391
RE: Need Help tt-39
ok I checked the plug it says OS A3 if that helps thanks
Posted on: 2/1/2007 8:10 PM by Author "Ghostship"
in the forum "Thunder Tiger - Raptor 30, 50, 60, 90"
http://www.rcuniverse.com/forum/fb.asp?m=5357834
RE: Need Help tt-39
this is a great thread. I just picked up a raptor 30 v2 w/tt 39 pro (used) and I can't get it started. I don't Know what glow plug is in it. I removed and tested it. Looks like it's working good. I am going to pick up a new one at my LHS. any tips on glow type and needle settings would be great. Thanks
Posted on: 2/1/2007 6:24 PM by Author "Ghostship"
in the forum "Thunder Tiger - Raptor 30, 50, 60, 90"
http://www.rcuniverse.com/forum/fb.asp?m=5357336
RE: whats better mx450 or trex450
my LHS just got the trex SA in it has all aluminiun frame for 199.99 us, what do you think about that
Posted on: 10/18/2006 8:35 PM by Author "Ghostship"
in the forum "T-Rex heli"
http://www.rcuniverse.com/forum/fb.asp?m=4885602
RE: where you fly, what heli, and post pics pics pics!!!!!!!!!!!
I fly in the air.
Posted on: 10/15/2006 9:38 PM by Author "Ghostship"
in the forum "Electric RC Helis"
http://www.rcuniverse.com/forum/fb.asp?m=4872440
RE: Falcon 40? Any Good?
Read the WALKERA DF4 thread. It is the same heli. The quality may not be as good but the setup and hopups are the same.
Posted on: 10/4/2006 8:25 PM by Author "Ghostship"
in the forum "Electric RC Helis"
http://www.rcuniverse.com/forum/fb.asp?m=4829135
RE: Raptor G2 Good and Bad
does anyone know who makes the raptor G2 I looked it upon heli.com and it looks great for 189.00 I know the Trex is best but if this little heli is any good I would like to give it a try
Posted on: 10/1/2006 8:02 PM by Author "Ghostship"
in the forum "Electric RC Helis"
http://www.rcuniverse.com/forum/fb.asp?m=4815822
RE: Walkera #4 Fixed Pitch Helicopter Forum
Msr frog Read all of this thread.. the fuses, motors, battery's, blades ect ect ect ect have already been covered several times.
Posted on: 4/5/2006 7:24 PM by Author "Ghostship"
in the forum "Walkera Helis - Dragonfly, etc.."
http://www.rcuniverse.com/forum/fb.asp?m=4129070
| 
