RE: Tamjets F 18 Hornet. Cant to fit Wren 160 into the bypass?
[quote]ORIGINAL: playerpete Can you give me a link to the engine mount? i want to see it. [/quote] http://www.bvmjets.com/Pages/Catalog/Leadpages/turbineparts.htm , about 2/3 of the way down the page. When installed, it looks like this, with the position of the mounting lugs being variable:
Posted on: 11/13/2009 7:28 AM by Author "Gordon Mc" in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=9250449

RE: JetCat V3 kero plug blown after only 34 starts - Normal??
[quote]ORIGINAL: madmodelman Once you've used a kerostart you would never go back to old fashioned glow plugs! [/quote] Well, I've used kero start both on my BMT (which, as far as I'm concerened, had the BEST kero-start system ever) and on one of my Jetcats ... and I still quite happily use propane start for most of my aircraft. Nothing wrong with it IMO. But then, I still use Nicads, 72 Mhz etc ... I only change when I see the need, rather than to keep up with the Joneses [;)]
Posted on: 11/2/2009 10:54 AM by Author "Gordon Mc" in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=9222321

RE: I need event dates PLEASE!!!
CA Jets : March 25->28 http://www.ca-jets.com/
Posted on: 10/30/2009 10:19 PM by Author "Gordon Mc" in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=9216546

RE: Adventures in fiberglass tank molding
than in one that I'm going to run throuhg the filters, pump etc in my aircraft. Gordon
Posted on: 10/28/2009 9:32 PM by Author "Gordon Mc" in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=9210825

RE: Roll Call- 3rd Annual Cali Crew
[quote]ORIGINAL: mr_matt [quote]ORIGINAL: Gordon Mc [s]Hope to[/s] [b]Will[/b] see you guys there in a few weeks. [/quote] I love it...I like the way you think! I have just tried The Dalmore, have you tried it? King Alexander III....nice [/quote] I'm actually not a connoisseur I'm afraid... again, to come down and join us with. Ron - I'm serious about the malt - so lemme know. Gordon
Posted on: 10/28/2009 9:24 PM by Author "Gordon Mc" in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=9210802

RE: Roll Call- 3rd Annual Cali Crew
. Gordon
Posted on: 10/28/2009 6:52 PM by Author "Gordon Mc" in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=9210347

RE: When is Enough Enough
Well Dustin, you were right and I was wrong [X(] ... when hard push comes to violent shove, apparently BV [u]will[/u] indeed put customers ahead of rep's. Although I'd much rather not have seen this whole situation develop in the first place, I am glad to have been proven wrong on this point, and I give kudos to BV on his stance.
Posted on: 10/28/2009 5:04 PM by Author "Gordon Mc" in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=9209988

RE: *** SIN CITY JETS '09 November 5-8 ***
it next year though, and I hope you guys have a great turnout and a safe event. Gordon
Posted on: 10/28/2009 1:24 PM by Author "Gordon Mc" in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=9209390

RE: Project MFD..............
Some incredibly cool stuff here guys - keep up the good work, and please keep sharing your progress.
Posted on: 10/28/2009 12:06 PM by Author "Gordon Mc" in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=9209180

RE: Worlds Best RC Jet Pilot
[quote]ORIGINAL: Ali I vote for TAM! [/quote] Aaaahhh - yooo tink daat, yooo drink too much green botta !
Posted on: 10/28/2009 11:51 AM by Author "Gordon Mc" in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=9209148

RE: When is Enough Enough
from BV. I hope he can do something to turn the tide around here. Gordon
Posted on: 10/28/2009 9:30 AM by Author "Gordon Mc" in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=9208834

RE: When is Enough Enough
of work to build up BV's reputation, only to see it get needlessly thrown away by others. Gordon
Posted on: 10/28/2009 1:38 AM by Author "Gordon Mc" in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=9208423

RE: My Apologies
;less than perfect attributes" (no, that doesn't mean A cups ! [;)] ) Gordon
Posted on: 10/26/2009 11:49 PM by Author "Gordon Mc" in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=9204952

RE: Hunt for micro jet for my Colibri and JC P-20 finally over
Looks pretty neat. Too bad a number of jet meets will miss out on the experience, due to their "no foamies" rules [:o]
Posted on: 10/26/2009 10:55 AM by Author "Gordon Mc" in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=9202970

RE: Digital air gauges??
any more. Gordon
Posted on: 10/26/2009 9:18 AM by Author "Gordon Mc" in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=9202775

RE: Sun Valley Jets (Ron Long's Bad A$$ Jet show)
. Chin up, Gordon
Posted on: 10/23/2009 11:07 AM by Author "Gordon Mc" in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=9195883

RE: Wren Turbines in the Turbine Clinic
Marc (rcadmin) has asked Nathan to take care of Wren's request ; he's apparently not around right now, but will handle the issue once he gets back. Gordon
Posted on: 10/23/2009 10:23 AM by Author "Gordon Mc" in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=9195783

RE: Bandit ARF...Any bad points.
, is what you need to worry about for over-stressing aircraft. Gordon
Posted on: 10/23/2009 1:51 AM by Author "Gordon Mc" in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=9195275

RE: Sun Valley Jets (Ron Long's Bad A$$ Jet show)
[quote]ORIGINAL: Shui It's good to know all those years I was in ''the camp'' selling jets for someone and flying my butt off, winning awards, Top Gun's, etc that I could do no wrong. Suddenly I'm like a bad guy? C'mon now. I'm flattered by the constant watchover I'm receiving, obviously someone is bored or simply misses me ;) [/quote] Have you ever noticed how little girls go out of their way to be as catty as possible to the little boys that they secretly have a huge crush on ? They figure that ANY attention they can get from the object of their love, must be better than being invisible and ignored by the one person they really want to get down & dirty with. [X(]
Posted on: 10/23/2009 12:51 AM by Author "Gordon Mc" in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=9195197

RE: Anyone fly jets off of Petromat?
, it can potentially become bumpy later on and require some rework. Gordon
Posted on: 10/22/2009 11:09 PM by Author "Gordon Mc" in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=9194968

RE: lookie what my wife got me
[quote]ORIGINAL: ravill I'm going to MAKE my fiancee buy me one now! [/quote] Please take video when you do this. [:)]
Posted on: 10/21/2009 2:31 PM by Author "Gordon Mc" in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=9191134

RE: Bandit ARF...Any bad points.
[quote]ORIGINAL: ravill The bad: They aren't REALY ARF's. There's quite a bit of work actually. I have built all 3 of mine, I know... [/quote] This, from the guy who thinks slapping the two halves of a BVM kevlar tank together is hard work ! [;)] If you think they're that much work, pay me some exhorbitant fee to assemble your next one [:)]
Posted on: 10/21/2009 1:18 PM by Author "Gordon Mc" in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=9190951

RE: Bandit ARF...Any bad points.
The only steering issues I've had with any Bandit, is that if you DON'T hold in a fair amount of up elevator as soon as you start rolling, you may get some really vicious left and right swings. A trailing link nose-gear helps, or stay with the regular gear but hold in that up right from the very start.
Posted on: 10/21/2009 10:56 AM by Author "Gordon Mc" in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=9190635

RE: lookie what my wife got me
[quote]ORIGINAL: Patrick Frost [quote]ORIGINAL: Daleroger Does she have any sisters ?? [/quote] Does she have any Gay Brothers??? [/quote] Classic !!! [:D][:D]
Posted on: 10/20/2009 10:32 PM by Author "Gordon Mc" in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=9189675

RE: Sun Valley Jets (Ron Long's Bad A$$ Jet show)
, I just remember that it had an obscenely expensive elevator. Gordon
Posted on: 10/19/2009 10:37 PM by Author "Gordon Mc" in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=9186843

RE: JetCat manuals.
busted here on RCU for whatever reason. Gordon
Posted on: 10/19/2009 7:44 PM by Author "Gordon Mc" in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=9186334

RE: Adventures in fiberglass tank molding
THIS post goes through - otherwise I give up for tonight. Gordon
Posted on: 10/18/2009 8:30 PM by Author "Gordon Mc" in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=9183729

RE: Adventures in fiberglass tank molding
sticking up slightly for a clunk-line to get worn / cut on. Gordon
Posted on: 10/18/2009 7:54 PM by Author "Gordon Mc" in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=9183628

RE: Sun Valley Jets (Ron Long's Bad A$$ Jet show)
[quote]ORIGINAL: uncljoe Ron & the ''BIG BALLER'' [/quote] Now THAT's an excellent trophy !
Posted on: 10/18/2009 4:54 PM by Author "Gordon Mc" in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=9183234

RE: Adventures in fiberglass tank molding
Can you guys explain a bit more about the brand, method of usage, etc of the gel coat ? Although I've done several DIY tanks, cowls, drop-tanks etc. in the past, I've not used gel-coat at all and I'd like to learn a bit more... Thanks for sharing, Gordon
Posted on: 10/18/2009 9:01 AM by Author "Gordon Mc" in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=9182318