RE: BVM brakes locked up ??
[quote]ORIGINAL: jason Hate to disagree but I really don't think there will be a problem with the wheel brakes. I've been using BVM brakes for 12 years now and I have never ever had one fail. I'm sure it will be something to do with the U.P valve. Jason [/quote] I totally agree with Jason on this one. +1
Posted on: 5/18/2013 2:20 PM by Author "Greg Wright" in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=11515353

RE: F-86 Sabre markings placement.
A plastic model might give you an idea of placements.
Posted on: 9/16/2012 5:01 AM by Author "Greg Wright" in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=11229831

RE: Congrats Scotty!
Congrats scott!!!!!!!!
Posted on: 9/14/2012 4:24 PM by Author "Greg Wright" in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=11228701

RE: Perfect Model Jet
For myself and a few others it would have to be aBVM F-100. That's why i'm getting a second one to have around.
Posted on: 9/5/2012 1:05 PM by Author "Greg Wright" in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=11218528

RE: FREE**ROUTE 66 JETS 7TH ANNUAL
Thanks Roger I'll need it in the morning to charge up my stuff.
Posted on: 9/5/2012 11:41 AM by Author "Greg Wright" in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=11218452

RE: FREE**ROUTE 66 JETS 7TH ANNUAL
Ok Gary i'll save you and mike a spot.
Posted on: 9/5/2012 11:36 AM by Author "Greg Wright" in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=11218446

RE: FREE**ROUTE 66 JETS 7TH ANNUAL
I'll be leaving in the morning tomorrow should be there by 10:00 AM. Will there be any power by the flight line to hook up a charging station under the tent?
Posted on: 9/5/2012 8:27 AM by Author "Greg Wright" in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=11218262

RE: Best scale photo!
Thanks to you David Hart i have these great shots of the Hun.[:D]
Posted on: 9/4/2012 5:23 PM by Author "Greg Wright" in the forum "RC Scale Aircraft"
http://www.rcuniverse.com/forum/fb.asp?m=11217433

RE: Best scale photo!
Here's my BVM F-100
Posted on: 9/4/2012 9:08 AM by Author "Greg Wright" in the forum "RC Scale Aircraft"
http://www.rcuniverse.com/forum/fb.asp?m=11216969

RE: RCBEE Gear & Door Sequencer
My DX18 has a built in sequencer. I have it installed in my F-100 and it works fantastic. No more extra electronic gadgets for me.
Posted on: 9/4/2012 9:02 AM by Author "Greg Wright" in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=11216961

RE: terry nitsch's old viper paint code?
I don't know the code. But i do know that Terry only used DuPont Paints.
Posted on: 9/3/2012 5:45 AM by Author "Greg Wright" in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=11215447

RE: BVM F-100
Gary, Your hot section is looking great, I hope to see you next week at RT.66 jets. You are more than welcome. I'm glad i could help you with your first flight on your F-100 and i hope to see you fly it more often. If you are going to do the candy stripe color scheme do it in orange man. Cause the yellow scheme is my first choice on my second Hun that i will hopefully be going to pick-up at the end of september. David, Here are a couple of more pictures that i used when i did my F-100 hot section. Rainer, I'm sorry to hear about your loss of that stunning F-100. I'm glad your going to get right back on that horse and build yourself a new one.
Posted on: 9/2/2012 8:48 AM by Author "Greg Wright" in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=11210871

RE: DX18 update Jetcat
Chris Huhn is the only one i no of so far. He's one of the devolopers of the spektrum radio.
Posted on: 8/22/2012 4:26 PM by Author "Greg Wright" in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=11202381

RE: JR 8911 vs 8711
I have been using them in my BVM F-100 for the past two years and i have never had any issues with them at all. I am using a Spektrum 12120 power safe receiver running on two 5000 mh 7.4 volt lipos with out any kind of regulators. It's nice to have that K.I.S.S factor in the plane.
Posted on: 8/22/2012 6:51 AM by Author "Greg Wright" in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=11201973

RE: Yellow P-47 build question
Tony, I would think that the hysol glue should be more than adequate to hold in the mounts. As long as you did the proper sanding of the glass and cleaned the area up with rubbing alcohol before you glued them in it should be fine. That is all i did on a P-38 of there's about three years ago and they are still holding on strong.
Posted on: 8/20/2012 2:56 PM by Author "Greg Wright" in the forum "RC Warbirds and Warplanes"
http://www.rcuniverse.com/forum/fb.asp?m=11200026

RE: Illini Jets 2012
I'll have to change my arrival to Friday as they only have a room available for Friday & Saturday.
Posted on: 8/14/2012 3:18 PM by Author "Greg Wright" in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=11193519

RE: Illini Jets 2012
I will be there for sure on thursday. Any info on hotels?
Posted on: 8/14/2012 3:15 PM by Author "Greg Wright" in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=11192313

RE: F-100
Bruno, I have used all JR servo's in my F-100, they are DS8911HV's on all major control surfaces, DS378HV's on the slats, and DS390HV's for all the air valves in the system. This thread is 5 Years old so i don't know if Bob will remember what he put in this Hun. I'm sure they were what ever BVM lists in the instructions which back then when this was built it would have been the JR DS8611 or DS8611a for all the major controls and the i think 3121's for slats and i think 358's for all air valves.
Posted on: 8/8/2012 6:45 PM by Author "Greg Wright" in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=11186053

RE: F-100
roger, I had no problems fitting the 8911HV's in to any of the servo openings. I just had to do a little adjusting to get them to fit. I did this to be able to run a straight High voltage system with out using any voltage regulators. My set-up is using the spectrum 12120 receiver with two 7.4 volt 2cell 4400 Mah batteries and no Regulator's. I also used the 378HV's and the 358HV's and it has been a super solid set-up.
Posted on: 8/8/2012 6:44 PM by Author "Greg Wright" in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=11186283

RE: F-100
Hi Bruno, If you are only going to run the system on 6volts these are the servos that you should be able to use with no problems at all. The DS8411'S will work for the Flaps ,Ailerons,Elevators,Rudder & Nose gear steering. The thin wing 378's will work for the slats, and the 368's for all the valves for the gear,doors,brakes and speed board.
Posted on: 8/8/2012 6:35 PM by Author "Greg Wright" in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=11186269

RE: Need some help from the F-14 pilots out there
A plastic model kit should give you a pretty good idea of markings and placements.
Posted on: 8/7/2012 6:47 AM by Author "Greg Wright" in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=11184085

RE: Ford S Max and Jets
This is a great vehicle for the hobby, it's a Ford Flex.
Posted on: 8/6/2012 12:45 PM by Author "Greg Wright" in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=11183102

RE: DX18 and telemetry with jetcat....?
Kirk, I was just out flying with Chris Huhn yesterday and i believe that you will start seeing the Jet Cat telemetry stuff start to show up in the HH OR Spectrum web sites soon. As they just did the recent up date for the DX18 radio as of yesterday. Like DavidR has said i'm sure they wanted to make sure everything worked perfectly in the development stages before they released any product. Chris also said that with this recent up date you should be seeing much better Counts on your data logger after a flight which we did see on chris's ultra bandit yesterday after he did a flight with the update installed in his radio.
Posted on: 8/5/2012 1:14 PM by Author "Greg Wright" in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=11181862

RE: Dean Cutshall’s F-100 F
Rainer, That is an awesome looking F model you have produced there. I have a D model that i have been flying and i'd like to know what you used for the finish on you model it looks fantastic. Is it Flite-Metal maybe? I will be doing a second D model here in another month or so and i have used the Flite-metal on the first one and will probably use it on the next one also. The yellow and white candy stripe is my next color scheme.
Posted on: 8/4/2012 5:38 PM by Author "Greg Wright" in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=11181076

RE: FREE**ROUTE 66 JETS 7TH ANNUAL
[quote]ORIGINAL: Roger Shipley <span style=''color: #339966''> <span style=''color: #0000ff''><font size=''4''>HOLIDAY INN INFO: 217-324-4556 A BLOCK OF ROOM HAVE BEEN RESERVED FOR R66 R66 RATES $79.00 REGULAR $99.00 THEY HAVE A FULL COURSE FREE BREAKFAST POOL AND HOT TUB A stones throw from the airport......<font color=''#000000''> [/quote] Do these rates also apply to the qualifier?
Posted on: 8/2/2012 4:42 PM by Author "Greg Wright" in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=11179010

RE: Landing Lights
[quote]ORIGINAL: Jetfan20 Hi All, I need a super brite nose landing light for my 1/4.5 Hawk. Just looking for the nose light not the entire Nav. system. Any help is greatly appreciated! Thanks in advance guys! [/quote] Try calling Details4scale and see what he might have.
Posted on: 8/1/2012 4:50 PM by Author "Greg Wright" in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=11177711

RE: Dayton D.O.G.S
I should be there again this year.
Posted on: 7/30/2012 7:00 AM by Author "Greg Wright" in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=11174367

RE: Jets Over Kentucky Week 2012 /
CONGRATS SHELBY!!!!!! Great job of flying hope to see you and your dad at Illini super jets or any where else. With what you have accomplished in such a short time you can be my wing women anytime. lol.
Posted on: 7/20/2012 4:51 PM by Author "Greg Wright" in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=11162938

RE: Michigan Jets 2012
I'm planning on making it george.
Posted on: 7/19/2012 5:36 AM by Author "Greg Wright" in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=11160933

RE: Model painting F-100 BVM
You just need to get in touch with jerry at pro-mark or rallie at tailormade decals with all your information and they should be able to make what ever you need. It's hard to list every single decal that they can provide to you so just give them a call.
Posted on: 7/17/2012 1:45 PM by Author "Greg Wright" in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=11158935