RE: Gaudius
Photo of my tray and my battery location Harris
Posted on: 1/10/2012 2:47 PM by Author "HARRIS-G" in the forum "Electric Pattern Aircraft"
http://www.rcuniverse.com/forum/fb.asp?m=10902255

RE: Gaudius
Hallo Claude I will take some photos of my battery tray and my battery location on tray and post them tonight. Harris
Posted on: 1/10/2012 4:11 AM by Author "HARRIS-G" in the forum "Electric Pattern Aircraft"
http://www.rcuniverse.com/forum/fb.asp?m=10901388

RE: Gaudius
Some more photos...
Posted on: 4/14/2011 4:36 AM by Author "HARRIS-G" in the forum "Electric Pattern Aircraft"
http://www.rcuniverse.com/forum/fb.asp?m=10461879

RE: Gaudius
it back in place). Harris
Posted on: 4/14/2011 4:35 AM by Author "HARRIS-G" in the forum "Electric Pattern Aircraft"
http://www.rcuniverse.com/forum/fb.asp?m=10461878

RE: Gaudius
Tim: Its all about personal preferences... I like to have all my mixes on,that's help do more clean my point rolls... HotFlyAlex: Thank you. The color of my canopy when i took it from Mr Mach was dark blue and i decide to paint it. And this is the result... Steve: If you move the C.G rear you will see that the plane also tracks well and it is very stable, i had the same discussion with Ola and he told me that i will not have any problem with stability if i move the C.G so back. The day that i maiden my plane was rather windy, and now i wait for a calm day to go and fly it again to check my mixes... For the friend that mail me about the weight of my batteries i modified them to lose weight. And here is one photo of them
Posted on: 3/25/2011 2:20 PM by Author "HARRIS-G" in the forum "Electric Pattern Aircraft"
http://www.rcuniverse.com/forum/fb.asp?m=10422433

RE: Gaudius
the details and setup he send me for my plane... Harris
Posted on: 3/25/2011 6:28 AM by Author "HARRIS-G" in the forum "Electric Pattern Aircraft"
http://www.rcuniverse.com/forum/fb.asp?m=10421563

RE: Gaudius
More photos..
Posted on: 3/24/2011 8:00 AM by Author "HARRIS-G" in the forum "Electric Pattern Aircraft"
http://www.rcuniverse.com/forum/fb.asp?m=10419674

RE: Gaudius
Some photos....
Posted on: 3/24/2011 7:58 AM by Author "HARRIS-G" in the forum "Electric Pattern Aircraft"
http://www.rcuniverse.com/forum/fb.asp?m=10419669

RE: Gaudius
to elevator for downlines. The plane flies slow and it tracks very well but i have to use it. Harris
Posted on: 3/23/2011 1:51 AM by Author "HARRIS-G" in the forum "Electric Pattern Aircraft"
http://www.rcuniverse.com/forum/fb.asp?m=10417207

RE: Gaudius
Where about is the C.G on this plane??? Thanks in advance Harris
Posted on: 2/17/2011 6:10 AM by Author "HARRIS-G" in the forum "Electric Pattern Aircraft"
http://www.rcuniverse.com/forum/fb.asp?m=10342491

RE: Gaudius
Excellent job and great weight... Harris
Posted on: 2/15/2011 2:46 PM by Author "HARRIS-G" in the forum "Electric Pattern Aircraft"
http://www.rcuniverse.com/forum/fb.asp?m=10338630

RE: Gaudius
And Finished at 47gramm without monokote. I hope that it will end below 60gramm.... Harris
Posted on: 2/3/2011 3:11 PM by Author "HARRIS-G" in the forum "Electric Pattern Aircraft"
http://www.rcuniverse.com/forum/fb.asp?m=10310257

RE: Gaudius
More pictures...
Posted on: 2/3/2011 3:05 PM by Author "HARRIS-G" in the forum "Electric Pattern Aircraft"
http://www.rcuniverse.com/forum/fb.asp?m=10310246

RE: Gaudius
More pictures....
Posted on: 2/3/2011 3:03 PM by Author "HARRIS-G" in the forum "Electric Pattern Aircraft"
http://www.rcuniverse.com/forum/fb.asp?m=10310234

RE: Gaudius
Next step with more pictures...
Posted on: 2/3/2011 3:01 PM by Author "HARRIS-G" in the forum "Electric Pattern Aircraft"
http://www.rcuniverse.com/forum/fb.asp?m=10310231

RE: Gaudius
Until my stuff come from Lorenz i decide to make a rudder and give it new shape.... also my thought is to be removable so i can change it and see any differences in flight between mine and the original and also i can take it off when i want to transport my plane. So i start again to Drawing and cutting and sanding......
Posted on: 2/3/2011 2:58 PM by Author "HARRIS-G" in the forum "Electric Pattern Aircraft"
http://www.rcuniverse.com/forum/fb.asp?m=10310221

RE: Gaudius
Then i put the 2.5mm rod that included with the kit and i glue it in place with epoxy, after that i put over the rod three strips of glass to be more secure... I continue the buildind after i take some stuff ordered from Mr Lorenz. Harris
Posted on: 1/24/2011 2:58 PM by Author "HARRIS-G" in the forum "Electric Pattern Aircraft"
http://www.rcuniverse.com/forum/fb.asp?m=10285457

RE: Gaudius
After ten days i was too busy with my work i found some time to make a little work on the stabs. I decide to put two mini servos in the tail and i screw them on the fuse. I wanted to be hidden in the stab and only the servo horn be visible outside.
Posted on: 1/24/2011 2:47 PM by Author "HARRIS-G" in the forum "Electric Pattern Aircraft"
http://www.rcuniverse.com/forum/fb.asp?m=10285432

RE: Gaudius
And after more cutting and sanding.... it was ready on the plane!!! it weights with the 10x15mm rubber 48gramm Because of the good fit it requires less than 2 gramm of epoxy with cotton. Harris
Posted on: 1/10/2011 2:04 PM by Author "HARRIS-G" in the forum "Electric Pattern Aircraft"
http://www.rcuniverse.com/forum/fb.asp?m=10253395

RE: Gaudius
Finally i decide to power it with a Hacker C50 14XL. Everything begins with a drawing then i took a fiberglass and after cutting and sanding... it was ready!!!
Posted on: 1/10/2011 1:55 PM by Author "HARRIS-G" in the forum "Electric Pattern Aircraft"
http://www.rcuniverse.com/forum/fb.asp?m=10253362

RE: Gaudius
Charlie Yes i opened the inlet on the chin cowl so i can put in the nose one plastic m3 screw to secure it Here are two photos of the two screws that hold the chin cowl in place and if you need i can take some with more details.
Posted on: 1/10/2011 1:48 PM by Author "HARRIS-G" in the forum "Electric Pattern Aircraft"
http://www.rcuniverse.com/forum/fb.asp?m=10253333

RE: Gaudius
All this added only 5 gramm more than i use the stock carbon tube but i think that is worth this extra weight[:D] Here is a photo of the fuse with the aluminum rod and the spacers, and a photo with the final weight of the stab. Harris
Posted on: 1/9/2011 1:25 PM by Author "HARRIS-G" in the forum "Electric Pattern Aircraft"
http://www.rcuniverse.com/forum/fb.asp?m=10250819

RE: Gaudius
And here are ready with the adjuster on
Posted on: 1/9/2011 1:18 PM by Author "HARRIS-G" in the forum "Electric Pattern Aircraft"
http://www.rcuniverse.com/forum/fb.asp?m=10250799

RE: Gaudius
I started slowly buliding the plane and as far i put on the hatch to the canopy and secure the belly with the same way as canopy (click on system) with plastic m3 screws. All that added only 7gramm to the fuse[:D][:D] After that i started putting on the stab adjusters and for doing that i had to cut the front tube with all the material round it to make enough room to glue a light ply and screw on the Gator stab adjusters. Here are some pictures of the stab with the front tube cutted down
Posted on: 1/9/2011 1:16 PM by Author "HARRIS-G" in the forum "Electric Pattern Aircraft"
http://www.rcuniverse.com/forum/fb.asp?m=10250793

RE: Gaudius
These days i will start to build my Gaudius, so far i am happy with the quality of the kit Here are my weights in gramms Fuse with canopy and belly 1006 Right wing 378 Left wing 380 Right stab 86 left stab 85 Rudder 73 Wing tube 75 Tail tubes 25 Landing gear 100 Spats 36 At first i plan to put Gator stab adjuster and if needed i will also put wing adjusters. Harris
Posted on: 1/3/2011 8:44 AM by Author "HARRIS-G" in the forum "Electric Pattern Aircraft"
http://www.rcuniverse.com/forum/fb.asp?m=10236197

RE: Gaudius
I got mine before five days and all i can say is that it is a very good constructed kit and very light. Anfortunately because of my work i will start to build it later. I have some quensions about it. Where you locate the aileron horns? there is material into the aileron to put those screws or outside it? And can i polish the color with wax? Harris
Posted on: 12/28/2010 11:45 PM by Author "HARRIS-G" in the forum "Electric Pattern Aircraft"
http://www.rcuniverse.com/forum/fb.asp?m=10224407

RE: Which motor: Neu F3A-1 or Hacker c50 14xl?
How is the power of C50 14XL in windy conditions? Harris
Posted on: 12/14/2010 1:12 AM by Author "HARRIS-G" in the forum "Electric Pattern Aircraft"
http://www.rcuniverse.com/forum/fb.asp?m=10195888

RE: Gaudius
Hans From the position of the straps i guess that you place the battery at the front part of the tray. Harris
Posted on: 12/12/2010 10:55 AM by Author "HARRIS-G" in the forum "Electric Pattern Aircraft"
http://www.rcuniverse.com/forum/fb.asp?m=10192412

RE: New Sebart Wind 50E
Tasos good job with the tube!! If you use the Turnigy 50-65 you must put the rudder servo in the tail because if you let it in the middle you will be very nose heavy.. Harris
Posted on: 11/29/2010 2:09 AM by Author "HARRIS-G" in the forum "Electric Pattern Aircraft"
http://www.rcuniverse.com/forum/fb.asp?m=10166142

RE: New Sebart Wind 50E
I agree with Arch. Maybe the kit don't have the best quality but all these minor issues doesn't take over an hour to be fixed. I have found worst issues in more expensive planes..... Harris
Posted on: 11/26/2010 10:53 AM by Author "HARRIS-G" in the forum "Electric Pattern Aircraft"
http://www.rcuniverse.com/forum/fb.asp?m=10160637