RE: Mark Jordan's email???
markjordan@tsn.cc
Posted on: 7/6/2012 2:53 AM by Author "HOOTERS racing" in the forum "Speed - RC Gas Boats"
http://www.rcuniverse.com/forum/fb.asp?m=11144938

RE: what one will be faster
it wont matter how much HP you have if the boat is set wrong its not just the motor that makes a boat fast
Posted on: 4/10/2012 2:29 PM by Author "HOOTERS racing" in the forum "Speed - RC Gas Boats"
http://www.rcuniverse.com/forum/fb.asp?m=11036531

RE: RCMK twin = 52cc's of rubbish
have you and pics of this new engine cheers [quote]ORIGINAL: TheFridge189 I don't know if you know, but Bonzi sports has now made and inline zenoah with 1 billet engine case, no coupler. Its a really nice engine. Not saying what you said is wrong, however this new true 2 cylinder engine looks much more promising then the older inline zenoahs did. No dealing with couplers and so on and so forth. Me personally I have had bad luck with Rcmk engines as well. I ordered two inline k-600's for my apache, and the motors are a bit less then what I would have expected. The starter is quite bad, so I got two easy starts for the motors which helped, however now that I was able to have a fun day offshore with the twin k-600's, one of them has some technical internal problem, and the other I believe has some internal problem, I know the reason they aren't starting is not because of my own fault. Time to spend $156 shipping them overseas to Rcmk. For sport boating, at this juncture I would never even think to buy an Rcmk again, at least with the experience that I have had with them.
Posted on: 3/28/2012 12:54 AM by Author "HOOTERS racing" in the forum "Speed - RC Gas Boats"
http://www.rcuniverse.com/forum/fb.asp?m=11018110

RE: 72
looking good bud how much did the bear hull weigh ....... iv had to stop work on my MTI for time being due to other projects but should be back on it soon cheers
Posted on: 2/23/2012 11:58 AM by Author "HOOTERS racing" in the forum "Speed - RC Gas Boats"
http://www.rcuniverse.com/forum/fb.asp?m=10972419

RE: What radio system do you guys use?
futaba 3pk 2.4 or futaba 4pk 2.4 cheers
Posted on: 2/19/2012 12:33 AM by Author "HOOTERS racing" in the forum "Speed - RC Gas Boats"
http://www.rcuniverse.com/forum/fb.asp?m=10965479

RE: gas outboard
its just a shame the alloy there made from is to soft on the AS drives
Posted on: 12/20/2011 11:33 PM by Author "HOOTERS racing" in the forum "Speed - RC Gas Boats"
http://www.rcuniverse.com/forum/fb.asp?m=10869346

RE: GAS OUTBOARD guys this is our new home
good to hear your ok bud i have taken a brake from racing as iv been working on some offshore stuff i will be in touch next year for a pair of Enigma drives for a 75" offshore cat with counter rotating motors cheers ian
Posted on: 12/5/2011 10:35 PM by Author "HOOTERS racing" in the forum "Speed - RC Gas Boats"
http://www.rcuniverse.com/forum/fb.asp?m=10845462

RE: GAS OUTBOARD guys this is our new home
has anyone heard from YPC cheers
Posted on: 11/30/2011 6:26 PM by Author "HOOTERS racing" in the forum "Speed - RC Gas Boats"
http://www.rcuniverse.com/forum/fb.asp?m=10837179

RE: S520 Question
man i wish it was that cheap here we pay $40.00 each member per year for AMPBA insurance then another $40.00 per year for your club membership then we pay $10.00 every race meet and we have meetings twice a month most months of the year at the end of the day if our insurance is saying no then we as club members will stand by that so we can keep running boats
Posted on: 10/19/2011 4:19 AM by Author "HOOTERS racing" in the forum "Speed - RC Gas Boats"
http://www.rcuniverse.com/forum/fb.asp?m=10772704

RE: S520 Question
i know that its to do with safety we dont run offshore events over here so we run on an oval course and our insurance and public liability wont allow it plus we dont look at pocket bike motors as a Rc boat engine they were not made for that job and i know zenoah motors weren't to start with but the build a line of hobby engines as time went on and so our insurance looks at zenaohs and Quickdraw's and RCMK type of motors a hobby built engines plus if we let some one with a blata engine run a boat and it gets away from them and hit someone say good bye to having a boat club to run at the insurance brokers here in australia are picky and dont like to make it easy for people so why invite the trouble
Posted on: 10/19/2011 3:00 AM by Author "HOOTERS racing" in the forum "Speed - RC Gas Boats"
http://www.rcuniverse.com/forum/fb.asp?m=10772644

RE: S520 Question
at this point there is no size restriction on hulls there was some talk about it but i wouldn't worry about it for now
Posted on: 10/19/2011 2:45 AM by Author "HOOTERS racing" in the forum "Speed - RC Gas Boats"
http://www.rcuniverse.com/forum/fb.asp?m=10772641

RE: S520 Question
we do run offshore on the oval course if enough boats turn up on the day the reason your mate cant run the turbine boat at and AMPBA clubs is because our insurance will not cover turbine motors same as pocket bike motors 90% of offshore guys iv spoken to want to ban pocket bike based motors and i must say im on there side as well
Posted on: 10/18/2011 10:59 PM by Author "HOOTERS racing" in the forum "Speed - RC Gas Boats"
http://www.rcuniverse.com/forum/fb.asp?m=10772544

RE: S520 Question
hey mate yep thats the one in regards to your mate turbine boat as cool as they are he wont be able to run or start it at our club its a bummer would have love to see it go cheers
Posted on: 10/18/2011 6:59 PM by Author "HOOTERS racing" in the forum "Speed - RC Gas Boats"
http://www.rcuniverse.com/forum/fb.asp?m=10772224

RE: S520 Question
hey bud as soon as iv got all my bits ill start a thread cheers
Posted on: 10/18/2011 1:26 PM by Author "HOOTERS racing" in the forum "Speed - RC Gas Boats"
http://www.rcuniverse.com/forum/fb.asp?m=10771661

RE: S520 Question
they sure do have water cooled cases iv got two 520 going into a 71" MTI cat cheers
Posted on: 10/18/2011 3:59 AM by Author "HOOTERS racing" in the forum "Speed - RC Gas Boats"
http://www.rcuniverse.com/forum/fb.asp?m=10770836

RE: GAS OUTBOARD guys this is our new home
im putting two of those S520 motors into a 70 inch MTI cat
Posted on: 10/10/2011 10:57 PM by Author "HOOTERS racing" in the forum "Speed - RC Gas Boats"
http://www.rcuniverse.com/forum/fb.asp?m=10759215

RE: GAS F1 INBOARD TUNNEL HULLS
if you want one like F1Rodman then get in contact with Mark Jordan http://www.mypage.tsn.cc/portrcmodelboats/ he's from Port Macquarie as for drive unit if your setting one up as an inboard id just use speedmaster hardware from www.hobbysupplies.com.au thats going to be your bet to keep your cost down cheers
Posted on: 10/9/2011 1:16 PM by Author "HOOTERS racing" in the forum "Speed - RC Gas Boats"
http://www.rcuniverse.com/forum/fb.asp?m=10756473

RE: 21 Tunnel Talk
at this point in time tecnopower are not making the outboard leg........ i have a tecnopower outboard powerhead and i love it cheers
Posted on: 8/13/2011 4:59 AM by Author "HOOTERS racing" in the forum "Speed - RC Nitro Boats"
http://www.rcuniverse.com/forum/fb.asp?m=10668516

RE: GAS OUTBOARD guys this is our new home
thats ok bud if you look at my pics at the start of this topic that is the first of the new shape before mark made the humps full size i will be building a new one as and ob soon cheers ian
Posted on: 8/1/2011 5:34 AM by Author "HOOTERS racing" in the forum "Speed - RC Gas Boats"
http://www.rcuniverse.com/forum/fb.asp?m=10649065

RE: GAS OUTBOARD guys this is our new home
that is the older hull he dose not make that one any more
Posted on: 8/1/2011 3:27 AM by Author "HOOTERS racing" in the forum "Speed - RC Gas Boats"
http://www.rcuniverse.com/forum/fb.asp?m=10648921

RE: GAS F1 INBOARD TUNNEL HULLS
ah yes it was only a mater of time Dom until the axis drive was brought to the F1 rule book for those who have not seen it yet http://www.youtube.com/watch?v=4buTnduRJXc
Posted on: 7/26/2011 5:23 AM by Author "HOOTERS racing" in the forum "Speed - RC Gas Boats"
http://www.rcuniverse.com/forum/fb.asp?m=10639343

RE: GAS F1 INBOARD TUNNEL HULLS
its the same boat as my one with the gas outboard but this one has the new cowl its 50 inch tunnel cheers ian
Posted on: 7/26/2011 2:18 AM by Author "HOOTERS racing" in the forum "Speed - RC Gas Boats"
http://www.rcuniverse.com/forum/fb.asp?m=10639221

RE: 72
at that price im very interested keep up the good work
Posted on: 5/26/2011 4:25 AM by Author "HOOTERS racing" in the forum "Speed - RC Gas Boats"
http://www.rcuniverse.com/forum/fb.asp?m=10541120

RE: gas outboard
man if only i had the spare cash id put my name on one keep up the good work cheers
Posted on: 5/16/2011 3:44 AM by Author "HOOTERS racing" in the forum "Speed - RC Gas Boats"
http://www.rcuniverse.com/forum/fb.asp?m=10522653

RE: GAS OUTBOARD guys this is our new home
hey mate sorry i just posted the wrong link you need to use the M8 x 1 spinner http://www3.towerhobbies.com/cgi-bin/wti0001p?&I=LXE162&P=SM this is the one to use cheers
Posted on: 5/14/2011 3:12 AM by Author "HOOTERS racing" in the forum "Speed - RC Gas Boats"
http://www.rcuniverse.com/forum/fb.asp?m=10518915

RE: GAS OUTBOARD guys this is our new home
dubro make a alloy spinner with m8 thread they fit stright on to the zen and rcmk motors thats whats on my old outboard http://www3.towerhobbies.com/cgi-bin/wti0001p?&I=LXE163&P=SM cheers
Posted on: 5/13/2011 8:47 PM by Author "HOOTERS racing" in the forum "Speed - RC Gas Boats"
http://www.rcuniverse.com/forum/fb.asp?m=10518674

RE: GAS OUTBOARD guys this is our new home
a bit of both bud by the way your tunnel is looking good mate i miss mine but am glad i sold it so i can build a new one lol after i finish the .21 and the .45 and two offshore cats and a 26cc cat and change shitty nappies lol cheers ian
Posted on: 5/13/2011 8:36 PM by Author "HOOTERS racing" in the forum "Speed - RC Gas Boats"
http://www.rcuniverse.com/forum/fb.asp?m=10518660

RE: GAS OUTBOARD guys this is our new home
well thought i had better touch base with you all seeing i started this topic im still building boats and i will be building a new jordo 1/4 tunnel down the track im just holding off while some gas outboard developments are being worked on (not by me) would love to tell more but you will all have to wait but the will be a new HOOTERS racing gas tunnel on its way cheers ian
Posted on: 5/13/2011 5:12 PM by Author "HOOTERS racing" in the forum "Speed - RC Gas Boats"
http://www.rcuniverse.com/forum/fb.asp?m=10518341

RE: GAS OUTBOARD guys this is our new home
hey mate what lower are the mid units for cheers ian
Posted on: 3/5/2011 1:18 PM by Author "HOOTERS racing" in the forum "Speed - RC Gas Boats"
http://www.rcuniverse.com/forum/fb.asp?m=10380819

RE: GAS OUTBOARD guys this is our new home
it would be nice to see someone build motors like this at a fair price id buy one of the mhz based ones if they weren't so over priced and build a new boat cheers
Posted on: 12/15/2010 2:40 AM by Author "HOOTERS racing" in the forum "Speed - RC Gas Boats"
http://www.rcuniverse.com/forum/fb.asp?m=10198101