Thunder RAPTOR
Hello everyone , Since I'm new to heli and I'd like to know if I can put a .91 engine into a Raptor 60 3d heli .What are the goods and bads . Any inputs will be greatly appreciated . HornetOne .
Posted on: 10/5/2009 10:09 PM by Author "HORNETONE" in the forum "Thunder Tiger - Raptor 30, 50, 60, 90"
http://www.rcuniverse.com/forum/fb.asp?m=9149836

RE: 1/2oz Carbon fiber mat
Hi Kamakasi , Thanks a lot for your inputs ... As I intended to use it as a reinforcement between balsa skin and foam wings on a jet that' has protential convertion to turbine powered ... Best regards , Sonny ! BTW : Have a nice holiday !
Posted on: 12/17/2004 9:07 PM by Author "HORNETONE" in the forum "Composites Fabrication And Repair"
http://www.rcuniverse.com/forum/fb.asp?m=2443735

1/2oz Carbon fiber mat
Hi everyone ........ Would like to know if anyone out there have ever used or have any experience with the 1/2oz carbon fiber mat or a little heavier than that .What are the advantage and disadvantage of it .Where can I buy them from ... Thanks in advance , Sonny !
Posted on: 12/13/2004 4:39 PM by Author "HORNETONE" in the forum "Composites Fabrication And Repair"
http://www.rcuniverse.com/forum/fb.asp?m=2430001

Question with composite
Hi everyone , After I've follow thru many posts up here .I'm not really clear on what's the difference between fully composite and fully molded ,what are the advantages of each one . Any inputs would be greatly appreciated . Thanks in advance , Sonny !
Posted on: 10/7/2004 11:06 PM by Author "HORNETONE" in the forum "Composites Fabrication And Repair"
http://www.rcuniverse.com/forum/fb.asp?m=2235509

RE: Superman 2004 event coverage and pictures
n
Posted on: 10/6/2004 9:47 PM by Author "HORNETONE" in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=2232652

RE: Superman 2004 event coverage and pictures
Hi everyone , Can someone tell me what is the address for this event as I'm traveling near there and wanted to come by tomorrow ,how's the weather over there within the last few days ... Thanks in advance , Sonny !
Posted on: 10/2/2004 5:15 PM by Author "HORNETONE" in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=2220616

RE: Need help with B-2 Project
Cool project .......... Send me your email address and I will forward some of the very helpful links ,also if you could send all the dimensions , weight and airfoils I might be able to help you out with the first initial C.G as I'm working on the process of a drawing on a bigger scale of which wingspan is about 123in. Sonny !
Posted on: 7/11/2004 1:31 AM by Author "HORNETONE" in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=1979204

RE: Byron F-15 Eagle
I also have one with an Olympus laying around but too many projects going on and never got time to work on it . Just to post some pics of the kit for you to view ... Sonny !
Posted on: 7/2/2004 12:59 AM by Author "HORNETONE" in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=1954193

RE: Need tricks on sanding down carbon fiber wing tube.
Hi everyone ..... By looking at this post I also have a question that keeps bugging me for a while ,can CF tube to be threaded on the inside or outside . T I A , Sonny !
Posted on: 6/30/2004 12:25 AM by Author "HORNETONE" in the forum "Composites Fabrication And Repair"
http://www.rcuniverse.com/forum/fb.asp?m=1947735

Which material to use for plug
Hi everyone ........ I'm planning to build a plug for one my own designed jet ,would like to know which isthe best material to construct the plug . As I've some experience with each of the listed materials below but would rather get more opinions in order to keep the plug lasts for a long time and may be producing several molds without getting damage : 1) high density blue foam 2) Minicell high density foam ( use to make cayak and surfing board ) 3) ..... Or should I just stick with regular balsa & plywood method to build up the fuse and then filled up inside with plaster to get the high level of strength ( by doing this ,will the plaster creates lots of heat and distord the shape ) . Money and time consuming are not an issue to me as long as I could get some high quality parts . Any inputs will be welcome and greatly apreciated , Sonny !
Posted on: 6/30/2004 12:09 AM by Author "HORNETONE" in the forum "Composites Fabrication And Repair"
http://www.rcuniverse.com/forum/fb.asp?m=1947688

RE: Finding the correct C.G of an airplane
Hi Paul and Ed , Thanks so much for your replies ... I've another question here , how to find the correct C.G if from a scratch build jet ... Best regards , Sonny !
Posted on: 6/29/2004 7:44 PM by Author "HORNETONE" in the forum "Scratch Building, Aircraft Design, 3D/CAD"
http://www.rcuniverse.com/forum/fb.asp?m=1946863

Finding the correct C.G of an airplane
Hi everyone ... What would be the best way to find the very correct Center of Gravity of a model airplane after I'd its plans enlarged to a bigger scale . Any inputs will be greatly welcome and appreciated. Thanks in advance , Sonny !
Posted on: 6/28/2004 11:48 PM by Author "HORNETONE" in the forum "Scratch Building, Aircraft Design, 3D/CAD"
http://www.rcuniverse.com/forum/fb.asp?m=1944282

RE: big SU 27 Flanker Project in Germany
Is there something wrong with the website or is it my browser needs adjustment ,because when I clicked on each article on the site it's just showed some red X marks instead . Thanks !
Posted on: 5/25/2004 11:57 PM by Author "HORNETONE" in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=1846478

RE: jet boy in australia
Try BaxGlobal.com website or give them a call . I've shipped a Yellow F-16 there before with very good rate .
Posted on: 5/18/2004 12:28 AM by Author "HORNETONE" in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=1824032

Ohio Jet Rally
Hi everyone , Does anyone know the date for Ohio jet scramble this year ( 2004 ). TIA , Sonny !
Posted on: 5/15/2004 10:37 PM by Author "HORNETONE" in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=1817919

Airfoil for a B-2
Hi everyone , I've just started to build an electric B-2 with wingspan of 96in , and I'm going to enlarged and convert it to twin turbine powered at a later time . What airfoils should I look into in order to get the most stable for the electric one and for the enlarged one . PS: The enlarged model will be about 133in wingspan . Your inputs are greatly welcome and appreciated , Sonny !
Posted on: 5/10/2004 10:22 PM by Author "HORNETONE" in the forum "Aerodynamics"
http://www.rcuniverse.com/forum/fb.asp?m=1803995

Questions with composite wing ...
Hi everyone , I'm building a Ziroli Panther and going to powered it with turbine and now just get to the wings . Due to the tremendous wing loading with turbine powered I intended to build the wings with fully composite .... Would like to know what are the advantages of fully composite or should I just moulded them right out of glass/epoxy and carbon fiber .... Since I'm new to composite stuff ,would like to get as much informations as I could so I can go on and do some experimenting before get into doing the real parts .... What are the difference between reinforced the wing skin with Honeycomb Nomex and Coremats ,what about weight issues and such as structural strength ... Or any other materials to do it with and what are the advantage and disadvantage of them .... Any inputs will be welcome and greatly appreciated , Sonny !
Posted on: 5/3/2004 11:07 PM by Author "HORNETONE" in the forum "Composites Fabrication And Repair"
http://www.rcuniverse.com/forum/fb.asp?m=1784097

RE: Painting in my garage
You can just add lot of water to the floor before paint and keep the door closed for a day or two ,then use vacuum machine around if desired when everything is dried out .......... Or you can get some plastic from Home Depot hang up to the ceiling and make four sides to form a little room enough for your needs and use vacuum machine for ventilation when spraying ,this is less messy and easy to clean up .
Posted on: 4/10/2004 6:18 PM by Author "HORNETONE" in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=1710191

RE: Where to go for Carbon Fiber Rods or Tubes
Here are some more : http://www.acp-composites.com/acp-cat.htm http://www.graphitestore.com/index.asp
Posted on: 3/30/2004 3:48 AM by Author "HORNETONE" in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=1672891

RE: ??F-15??? Help Me. Still needs plans
Holly Molly Sh#&$(&$ t ..................I just can't believe there are people like that in this world just shipped you that plane with pieces ... Couldn't keep my mouth shut when seeing sonething like this , but you've done a great job putting it together though . Best of luck !
Posted on: 3/25/2004 12:37 AM by Author "HORNETONE" in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=1657671

RE: MOVE OVER JOHNNY H. , THE BIG KAT IS COMING SOON!!
Are you guys going to fly this jet out of Ashtabula Municipal airport when done ??? [sm=thumbup.gif]
Posted on: 3/1/2004 8:01 PM by Author "HORNETONE" in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=1580901

Needed transportation to Florida jets
Hello there .......... If anyone going to drive to Florida jets from California and still have room in the trailer as i'm in needed of transporting ,i can meet you somewhere between Dallas to Alabama to pick up my stuff. I can pay or share the cost with you , please contact me at : Hornetone@zoominternet.net for details . Thank you , Sonny !
Posted on: 3/1/2004 1:07 AM by Author "HORNETONE" in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=1578383

RE: I HAVE TO HAVE IT!!!!!!!!!!!!!!
That guy ,he has all kind of connections to the most sweetest toys we've ever dreaming of . If i win the lottery will definitely hunt him down............. SWEEEEEEEEEEEEET !
Posted on: 2/26/2004 8:30 PM by Author "HORNETONE" in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=1568455

RE: Finnally an F-15 with SCALE LINES
Hi Sean , Is that the F-15 from Yellow's ? Looks great ...excellent job ! [sm=thumbup.gif][sm=thumbup.gif][sm=thumbup.gif]
Posted on: 2/26/2004 8:19 PM by Author "HORNETONE" in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=1568412

RE: F-18 on e-bay
They'd relisted it with Pre-Approved bidders only ......... Man , i could not wait to see who's the lucky one got hold of this beauty . This guy have tons of military jets for sale . http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&category=4672&item=3079057375
Posted on: 2/17/2004 10:22 PM by Author "HORNETONE" in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=1538769

RE: F-18 on e-bay
Still going strong to almost 100 Mils ............... I think lots of them will get negative feedbacks for non paying .[:D][:D][:D]
Posted on: 2/16/2004 9:03 PM by Author "HORNETONE" in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=1535222

RE: Need a large Jet
Hi Sung , Send me your email address thru PM or directly to my email , i think that A-10 is too small compared to Don's . Go to this link to check out more details that i'd post a while ago: http://www.rcuniverse.com/forum/fb.asp?m=1362822&key= Sonny !
Posted on: 2/5/2004 10:23 PM by Author "HORNETONE" in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=1501293

RE: Need a large Jet
If you're looking for a big airframe and wanted to joint me to share the pains of a large jet ,let me know i can get you one of these monster with fully details ABS parts .[:D][:D][:D]
Posted on: 2/5/2004 4:04 AM by Author "HORNETONE" in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=1498636

Byron Mig-15 convertion kit for Dynamax OS 91
Hi .... Just wanted to know if anyone know the gentleman who used to make the covertion kits from Byron fan to Dynamax fan operation for Byron Mig-15 .I remembered sometimes back in 1994 or 1996 ,there is a guy named Lynch or Bob attended at the Texas jet rally has a Byron Mig-15 converted to Dynamax fan OS 91 and he'd stating that he offering this kit for sale . really appreciated if someone could chime in or forward the info
Posted on: 2/2/2004 1:44 AM by Author "HORNETONE" in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=1489311

RE: Need a large Jet
Hi Johnny , Is that the Mach 2.2 composite kit ,which produced a while ago ??? Looks sweet ! [sm=thumbup.gif]
Posted on: 1/26/2004 12:47 AM by Author "HORNETONE" in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=1467324