|
RE: WALKERA 37
The seller does have an upgraded rtf df37 that includes the tri-blade rotor setup and the airwolf body... http://www.rc-expert.com/product-package.php?pid=627 also he has a basic rtf df37 with the tri-blade setup rtf for just $199... http://www.rc-expert.com/product-package.php?pid=628
Posted on: 10/10/2007 10:28 AM by Author "HP03 BlackHawk"
in the forum "Walkera Helis - Dragonfly, etc.."
http://www.rcuniverse.com/forum/fb.asp?m=6472978
RE: WALKERA 37
Hey guys, how about the new CNC tri-blades rotor setup from rc-expert? Anyone tried one on a #37 yet? It looks pretty cool for only $99 Here's a link... http://www.rc-expert.com/accessory.php?pid=147&aid=u-450-5-tri-blades-rotor
Posted on: 10/10/2007 12:23 AM by Author "HP03 BlackHawk"
in the forum "Walkera Helis - Dragonfly, etc.."
http://www.rcuniverse.com/forum/fb.asp?m=6471861
RE: RVMSHOP SUPREX Build thread
claimed to be? And like my "HP-03" Blackhawk does the manual claim it's made by "
Posted on: 3/6/2007 5:04 AM by Author "HP03 BlackHawk"
in the forum "Walkera Helis - Dragonfly, etc.."
http://www.rcuniverse.com/forum/fb.asp?m=5518054
RE: RX for Zhen Hua TX. Help!
I don't think anyone has found another rx to work with the Zhen Hua TX except Walkera.[8|] Well, I take that back...check this out if you haven't already... http://www.rcuniverse.com/forum/m_3897381/tm.htm [:D]
Posted on: 3/6/2007 2:12 AM by Author "HP03 BlackHawk"
in the forum "Walkera Helis - Dragonfly, etc.."
http://www.rcuniverse.com/forum/fb.asp?m=5517854
RE: WALKERA 37
The DF37 is still listed on Walkera's web site as Product No. Z30370104... It don't say anything about being discontinued there... [quote]ORIGINAL: W37 Cepeda HI guys. Just heard that the Df37 is discontinued. Can someone verify this? I wonder what will replace it... W37 Cepeda [/quote]
Posted on: 1/24/2007 6:46 AM by Author "HP03 BlackHawk"
in the forum "Walkera Helis - Dragonfly, etc.."
http://www.rcuniverse.com/forum/fb.asp?m=5314946
RE: 22E transmitter question/rechargables?
You would be amazed at the differents you will notice if you try these in your Walkera TX: http://www.energizer.com/products/lithium/default.aspx you will get a full 13 volts or more with these to power the TX where you should notice an instant decrease in glitching and an increase in range as opposed to only 9.6 volts from rechargables and they will keep on producing well over 12 volts for a very very long time. They may seem kinda expensive but they are much more powerful and longer lasting than even the best alkalines and well worth it. You can get them at any Wal-Mart and sometimes you can get them for a cheaper price on ebay. Once I tried them the first time I was instantly impressed and now they are all I will use in any of my Walkera TX's (#4, #35, and 22e) when flying. I only use rechargables (NiMH 2200 mAH minimum) when doing pre-flight testing to help preserve the energizer lithiums to use for outdoor flight. But if you still want to use rechargables and charge them with the TX's charging jack you can use any standard 12v 300~500mAH dc adapter that will plug in and has a center positive plug but do not use an adapter marked higher than 12v or you may damage the TX.
Posted on: 1/24/2007 6:06 AM by Author "HP03 BlackHawk"
in the forum "Walkera Helis - Dragonfly, etc.."
http://www.rcuniverse.com/forum/fb.asp?m=5314888
RE: mounting the antenna
How about these: http://www.rcmarket.org/Base-loaded-Antenna-35mhz-p-14197.html or about halfway down the page here: http://www.modelhelicopters.co.uk/acatalog/Quk_RadioAccs.html
Posted on: 1/24/2007 4:52 AM by Author "HP03 BlackHawk"
in the forum "Walkera Helis - Dragonfly, etc.."
http://www.rcuniverse.com/forum/fb.asp?m=5314817
RE: Walkera DF 5#5 - N30 motors remplacement ??
You can replace both of those motors for just $12.99 + s&h (includes 2 N30 motors both w/new gears and power wires pre-installed) right here: http://www.hobbyjapan2000.com/store/proddetail.php?prod=HM-5-5-Z-21
Posted on: 1/24/2007 4:31 AM by Author "HP03 BlackHawk"
in the forum "Walkera Helis - Dragonfly, etc.."
http://www.rcuniverse.com/forum/fb.asp?m=5314801
RE: Walkera 22E Lets Talk
For any 22E owners that are using the original Walkera 6ch RX & TX...Please share some info by answering these 3 questions: 1)What brand and type of batteries are you using in your TX and what type of battery is on the heli? 2)Are you having any kind of "glitching" and are you using a brushed or brushless motor? 3)If you are experiencing some glitching what do you suspect is or may be causing it and what kind of antenna do you have on the heli?
Posted on: 10/12/2006 3:10 PM by Author "HP03 BlackHawk"
in the forum "Walkera Helis - Dragonfly, etc.."
http://www.rcuniverse.com/forum/fb.asp?m=4859209
RE: WALKERA 37
fomalhaut, the #10 dip switch must be off (unlocked) to make adjustment with either knob then once you've found a good setting switch it back on (locked) to save that setting...
Posted on: 10/7/2006 12:21 AM by Author "HP03 BlackHawk"
in the forum "Walkera Helis - Dragonfly, etc.."
http://www.rcuniverse.com/forum/fb.asp?m=4757465
RE: WALKERA 37
Look at the bright side of it serhathakan, your new 36 should be much lighter than the 37... [quote]ORIGINAL: serhathakan Boys i buy a 36 kit cause of cnc parts and assembied 37 's electronics to it. But i dont like 36 and wondering why everybody filled with admiration it. If it is for similarity with trex (90 degrees swash system) it can be a little acceptable but if it is not i dont know why? I put it to near my 37 .It looks smaller thinner and waek. I dont like 36 and i want walkera to produce some cnc part for 37 [/quote]
Posted on: 9/15/2006 12:50 AM by Author "HP03 BlackHawk"
in the forum "Walkera Helis - Dragonfly, etc.."
http://www.rcuniverse.com/forum/fb.asp?m=4750298
RE: Where do you fly???
Come on guys, flying in the wind make good practice. The more you do it the better you get and then when the wind dies down it's alot easier to control than before you practiced in the wind. Just be careful and don't try to do the normal stuff you do when there's no wind until you feel comfortable with it... Fly slow and easy...
Posted on: 9/1/2006 1:35 PM by Author "HP03 BlackHawk"
in the forum "Walkera Helis - Dragonfly, etc.."
http://www.rcuniverse.com/forum/fb.asp?m=4697607
RE: WALKERA 37
W37, do you happen to know what your upgraded heli's weight is now without the battery?
Posted on: 9/1/2006 12:57 PM by Author "HP03 BlackHawk"
in the forum "Walkera Helis - Dragonfly, etc.."
http://www.rcuniverse.com/forum/fb.asp?m=4697500
RE: Walkera Dragonfly 22E Inturder 3D CCPM -- Does ANYONE have some input for this bird?
tachman, are you using training gear? It will save you alot of money and frustration.... Also- get your parts from rcandme.com Great prices, super fast shipping, and excellent support...
Posted on: 8/29/2006 7:54 AM by Author "HP03 BlackHawk"
in the forum "Walkera Helis - Dragonfly, etc.."
http://www.rcuniverse.com/forum/fb.asp?m=4683717
RE: WALKERA 37
What do you mean you shortened your antenna by only 1 3/4 wavelength? It's a 1/4 wave antenna... Are you sure you know what you are talking about? [sm=lol.gif]
Posted on: 8/29/2006 5:20 AM by Author "HP03 BlackHawk"
in the forum "Walkera Helis - Dragonfly, etc.."
http://www.rcuniverse.com/forum/fb.asp?m=4683463
RE: Walkera 22E Lets Talk
krisma, make sure you get a tail motor that has the same pinion and if you get one that claims to be the same spec but turns by hand more freely (doesn't feel like the magnets are as strong while not running) you may have to re-adjust your gyro..
Posted on: 8/28/2006 5:32 AM by Author "HP03 BlackHawk"
in the forum "Walkera Helis - Dragonfly, etc.."
http://www.rcuniverse.com/forum/fb.asp?m=4678946
RE: Walkera 22E Lets Talk
So, no comments on using 5 gram servos? Well anyway I had the stock servos start twitching and had two brand new 5 gram servos laying around so I replaced the two servos that are side-by-side with them and ordered another to match them but couldn't wait for it to arrive to test them out and went for a flight with 1 stock servo and 2 others that are much faster and believe it or not it actually flew quite well under the circumstance. And I don't mean just hovering I did a couple of figure eight's as well but don't get me wrong...I didn't push it any more and quit while I was ahead. So when the other servo gets here and all of them match I think they will do well provided any of them don't just fail suddenly. They are MUCH faster than the stock servos and it's very noticeable but in a good way...
Posted on: 8/26/2006 7:44 AM by Author "HP03 BlackHawk"
in the forum "Walkera Helis - Dragonfly, etc.."
http://www.rcuniverse.com/forum/fb.asp?m=4671151
RE: Walkera 22E Lets Talk
Does anyone here know if 3 TowerPro SG50 5g servos would work well on a 22E? They fit just like the original 7.6g servos and will even use the original servo arms...but my question is, are they powerful enough to handle the load?
Posted on: 8/24/2006 3:29 AM by Author "HP03 BlackHawk"
in the forum "Walkera Helis - Dragonfly, etc.."
http://www.rcuniverse.com/forum/fb.asp?m=4662632
RE: WALKERA 37
Hey W37, I got a set of those landing gear from xmseller and hate'em because they are sharp edged, they are ugly, the skids bend easy, they suck, they are heavy and when the legs get bent it's hard to get them bent back even. [sm=thumbdown.gif]I also got a set of those night blades though and love them, they are nice and smooth, very stiff, track well, balanced and look good even when they are not turned on and pretty light weight too...The set I got was worth the $59...It don't have to be dark to see them either they are visible day or night...[sm=thumbup.gif]
Posted on: 8/11/2006 5:34 PM by Author "HP03 BlackHawk"
in the forum "Walkera Helis - Dragonfly, etc.."
http://www.rcuniverse.com/forum/fb.asp?m=4611209
RE: WALKERA 37
If any of you use the Align head you will lose the advantage that the flybar on top has which I thought was a feature on the 37. Otherwise you could have just bought a T-REX. These parts that serhathakan has shown seems to me would be a better choice being very similar with the flybar up on top and out of the rotor wash...
Posted on: 7/27/2006 12:44 AM by Author "HP03 BlackHawk"
in the forum "Walkera Helis - Dragonfly, etc.."
http://www.rcuniverse.com/forum/fb.asp?m=4549767
RE: Walkera 22E Lets Talk
OK, I know it's a little late for this but the 22e doesn't have a feathering shaft... [quote]ORIGINAL: consultjdm Shipper, Check your feathering shaft, if you banged around you may have bent it. [/quote]
Posted on: 7/24/2006 8:58 AM by Author "HP03 BlackHawk"
in the forum "Walkera Helis - Dragonfly, etc.."
http://www.rcuniverse.com/forum/fb.asp?m=4537821
Li-poly storage question
Will it damage a li-poly battery or cause it to swell if you store it in an airtight container such as a large child proof topped pill bottle?
Posted on: 7/14/2006 5:29 AM by Author "HP03 BlackHawk"
in the forum "Electric Training"
http://www.rcuniverse.com/forum/fb.asp?m=4500321
RE: WALKERA 37
http://www.walkera.com/cn/upload/explain/Z30370104_expe.pdf (8.17mb) [quote]ORIGINAL: RamboSmurf Hi Does anyone know a link to a manual for the 37. I ordered one and am waiting on it and would like to see a manual before I get the heli. I own a blade CP and I'm tired of burning out rear motors. So we will give this a try [/quote]
Posted on: 6/27/2006 1:21 PM by Author "HP03 BlackHawk"
in the forum "Walkera Helis - Dragonfly, etc.."
http://www.rcuniverse.com/forum/fb.asp?m=4436973
RE: Trex build and tutorial videos - FREE
Mark at RR is a PUNK![sm=punching.gif] I seen what he did to finless over there at RunRyder so I'll never go back there again. finless bob is a bonifide T-Rex expert and can answer any question with the correct answer and give a solution to any problem and if he can't right away it don't take him long to get an answer or solution with the connections he has...he's a great asset to any forum and I'm glad to see him here...My hat's off to you finless...
Posted on: 6/13/2006 8:09 AM by Author "HP03 BlackHawk"
in the forum "T-Rex heli"
http://www.rcuniverse.com/forum/fb.asp?m=4384883
RE: Walkera #4 Fixed Pitch Helicopter Forum
[sm=spinnyeyes.gif]
Posted on: 6/13/2006 7:38 AM by Author "HP03 BlackHawk"
in the forum "Walkera Helis - Dragonfly, etc.."
http://www.rcuniverse.com/forum/fb.asp?m=4377610
RE: Walkera #4 Fixed Pitch Helicopter Forum
You can find a 4 in 1 for just $20 right here: http://www.nitroplanes.com/efsamihecore.html As far as a cheap one that will work with the Optic 6... I don't think there is such a thing...not a cheap one anyway... [quote]ORIGINAL: chench Sorry [:D] Does anyone know where cheap 4-in-1s that work with normal radio equiptment can be bought? Today I burned out my walkera 4-in-1 and Iv decided to sell off my walkera Txs and get an Optic 6 [8D] Cheers [/quote]
Posted on: 6/13/2006 7:18 AM by Author "HP03 BlackHawk"
in the forum "Walkera Helis - Dragonfly, etc.."
http://www.rcuniverse.com/forum/fb.asp?m=4384796
RE: WALKERA 37
Has anyone here ordered parts from www.rcandme.com now that they have their DF37 parts listed? I was just curious on how long it took to recieve them. They have impressed me with their execellent prices already but their shipping is amazing (compared to any others I've dealt with), I ordered a set of DF35 new "Z" wide landing gear for my BlackHawk, and a DF4 flybar Sunday night
Posted on: 6/6/2006 1:44 PM by Author "HP03 BlackHawk"
in the forum "Walkera Helis - Dragonfly, etc.."
http://www.rcuniverse.com/forum/fb.asp?m=4359822
.
[&o]
Posted on: 6/1/2006 7:02 AM by Author "HP03 BlackHawk"
in the forum "Walkera Helis - Dragonfly, etc.."
http://www.rcuniverse.com/forum/fb.asp?m=4279596
RE: CF Night Blades for Zoom/Shogun & TREX
Anybody else using these? How do you like them?
Posted on: 5/6/2006 6:22 AM by Author "HP03 BlackHawk"
in the forum "Electric RC Helis"
http://www.rcuniverse.com/forum/fb.asp?m=4246012
RE: 11.1v li-poly in Walkera transmitter?
I now have 8 flights (8 full battery packs) and the voltage for the tx pack with 8 Energizer e2 cells is 12.12v. I bought a second set of e2 cells for my 6ch Walkera TX that have a exp. date of 2021 (the first set is 2020) and after installation but before their first use their voltage is 13.41v!
Posted on: 5/5/2006 10:09 PM by Author "HP03 BlackHawk"
in the forum "Walkera Helis - Dragonfly, etc.."
http://www.rcuniverse.com/forum/fb.asp?m=4245157
| 
