RE: Great Planes Extra 330L Build
Thanks, I am planing on building mine with foam wings that is why i am asking for the dihedral.
Posted on: 4/9/2012 4:25 AM by Author "Hawk21" in the forum "Kit Building"
http://www.rcuniverse.com/forum/fb.asp?m=11034148

RE: Great Planes Extra 330L Build
[quote]ORIGINAL: OldScaleGuy This picture shows why i wait to finish leading edges until just prior to ready to cover. I slipped yesterday and a finger nail hit the leading edge. Had to learn this one the hard way. [:D] [/quote] You can use water to take out that dent. Also do you know how much dihedral the wings have?
Posted on: 4/8/2012 8:59 AM by Author "Hawk21" in the forum "Kit Building"
http://www.rcuniverse.com/forum/fb.asp?m=11033049

RE: Helimax mx 400 no tail control
Problem solve. The mx 400 upgrade T/B holder (red ones) were replaced for some TREX 450 T/B holder. The counterweight on the blade holders really make a difference witch the MX 400 did not have. here is a video of what is happening with the upgrade blade holders http://www.youtube.com/watch?v=G9CdNZLd3_w
Posted on: 2/1/2012 6:36 AM by Author "Hawk21" in the forum "Helimax"
http://www.rcuniverse.com/forum/fb.asp?m=10938246

RE: Helimax mx 400 no tail control
I had the t/r drive shaft pulley stripped. I replaced it. Now is the servo that when i spool up and go in a hover it cant move the tail, on the ground without power i am able to move the tail. I already check all the mixes and nothing is on.
Posted on: 1/31/2012 10:55 AM by Author "Hawk21" in the forum "Helimax"
http://www.rcuniverse.com/forum/fb.asp?m=10937003

Helimax mx 400 no tail control
Hi, I am having a problem with the tail on my mx400, the servo moves the tail freely both sides, when I applied power at certain moment the servo cant move the tail. The gyro is a 401 and the servo is a futaba 9650. I tried a new 401 gyro and a hitec 5084 and still the same. I am running out of ideas for fixing this.
Posted on: 1/31/2012 7:32 AM by Author "Hawk21" in the forum "Helimax"
http://www.rcuniverse.com/forum/fb.asp?m=10936726

RE: Raven Kit for 50cc gas Who made it
What is the wingspan? Aero Dynamic made a raven a while ago like 1996 or later
Posted on: 5/28/2008 2:40 PM by Author "Hawk21" in the forum "Questions and Answers"
http://www.rcuniverse.com/forum/fb.asp?m=7551667

RE: Engine?
[quote]ORIGINAL: GUNS I have one in a 87" YAK at 15lbs 10oz and it is insane power!! Tim [/quote] that weight was for a lanier yak??
Posted on: 1/13/2008 7:28 AM by Author "Hawk21" in the forum "Gas Engines"
http://www.rcuniverse.com/forum/fb.asp?m=6898951

RE: Da 50 starting
check the pressure line to the carb
Posted on: 1/12/2008 3:28 PM by Author "Hawk21" in the forum "Gas Engines"
http://www.rcuniverse.com/forum/fb.asp?m=6895817

RE: DA 50R Flame out
DA recomends regular fuel, my friend DA 50 was doing the same thing inverted at 1/4 throtle then after talking to DA we found that the low neddle was lean so we open the neddle and problem solve
Posted on: 1/7/2008 10:27 AM by Author "Hawk21" in the forum "Gas Engines"
http://www.rcuniverse.com/forum/fb.asp?m=6868124

RE: FPE 3.2 52cc
have someone try a 23x8 or it is to much for the engine?
Posted on: 12/31/2007 9:27 AM by Author "Hawk21" in the forum "Gas Engines"
http://www.rcuniverse.com/forum/fb.asp?m=6830791

FPE 3.2 52cc
What rpm are you guys getting with a FPE 3.2 and what prop??
Posted on: 12/28/2007 6:36 AM by Author "Hawk21" in the forum "Gas Engines"
http://www.rcuniverse.com/forum/fb.asp?m=6814948

RE: Da props
You should check the balance, they come close but not perfect at least the ones I verify. The Mejzlik 23x8 should give you more thrust. My friend have been using a Mejzlik 23x10 in his extra 260 with good result for IMAC, it does not spool fast but maintain a more constant speed. Give it a try and tell what you like from it. What aircraft do you have?
Posted on: 12/23/2007 2:38 PM by Author "Hawk21" in the forum "Gas Engines"
http://www.rcuniverse.com/forum/fb.asp?m=6795211

RE: Brillelli 50 wont idle in the air.
it could be that the air that pass by the carb create a suction and the fuel goes out the carb instead of going in to the engine are you using the velocity stack?
Posted on: 11/20/2007 10:17 AM by Author "Hawk21" in the forum "Gas Engines"
http://www.rcuniverse.com/forum/fb.asp?m=6649334

RE: Brillelli 46cc
My friend have been using a 22x8 menz but do I do not think it is the best prop for the engine, it is turning at 6700 Which prop you guys like better with the 46?
Posted on: 11/13/2007 2:17 PM by Author "Hawk21" in the forum "Gas Engines"
http://www.rcuniverse.com/forum/fb.asp?m=6619807

RE: Torch 90 cc new from Brazil
can another spark plug be put on the engine? that can give some rpm
Posted on: 10/4/2007 7:37 AM by Author "Hawk21" in the forum "Gas Engines"
http://www.rcuniverse.com/forum/fb.asp?m=6448142

RE: Looking for a 4" fiberglass spinner
Look in this site they have a silver fiberglass 4" http://www.bissonmufflers.com/en/props_search_results.htm
Posted on: 9/17/2007 12:57 PM by Author "Hawk21" in the forum "Giant Scale Aircraft - 3D & Aerobatic"
http://www.rcuniverse.com/forum/fb.asp?m=6378830

RE: Best combination for 3D
What is the weight of the showtime with that engine? what is your set up?
Posted on: 9/17/2007 11:58 AM by Author "Hawk21" in the forum "Gas Engines"
http://www.rcuniverse.com/forum/fb.asp?m=6378625

RE: Evolution 58GX good or bad
There is a video on the web of a mvvs 58 turning a mejzlick 26 x 10 at 6000 rpm, it is a strong engine
Posted on: 9/14/2007 6:14 PM by Author "Hawk21" in the forum "Gas Engines"
http://www.rcuniverse.com/forum/fb.asp?m=6368617

RE: Precision Aerobatics 35% Extra 330L Build and review
The extra is an awsome flyer it has like the correct wing area wich make it good for 3D and for IMAC
Posted on: 9/12/2007 10:44 AM by Author "Hawk21" in the forum "Giant Scale Aircraft - 3D & Aerobatic"
http://www.rcuniverse.com/forum/fb.asp?m=6358331

RE: Precision Aerobatics 35% Extra 330L Build and review
Thanks Lloyd, I use 2 5945 on ailerons an the 2 servos have slightly more torque than a single 5955 and I think it really need both servo it is a long aileron
Posted on: 9/11/2007 8:01 PM by Author "Hawk21" in the forum "Giant Scale Aircraft - 3D & Aerobatic"
http://www.rcuniverse.com/forum/fb.asp?m=6356047

RE: Extreme Flight 74" YAK 54 and Torch Engine 40cc
really nice video, it is a loud engine for sure maybe it need a bigger prop I like the performance of that combo
Posted on: 9/11/2007 2:57 PM by Author "Hawk21" in the forum "Giant Scale Aircraft - 3D & Aerobatic"
http://www.rcuniverse.com/forum/fb.asp?m=6355071

RE: Precision Aerobatics 35% Extra 330L Build and review
check out a video a friend made of me flying the PA Extra 330 http://www.youtube.com/watch?v=yQgqsulGHWw
Posted on: 9/11/2007 2:33 PM by Author "Hawk21" in the forum "Giant Scale Aircraft - 3D & Aerobatic"
http://www.rcuniverse.com/forum/fb.asp?m=6354989

RE: 26 gt tightened up & won't run corectly
a normal bearing should look like silver color an overheated bearing should have some sort of discoloration
Posted on: 9/3/2007 6:07 PM by Author "Hawk21" in the forum "Gas Engines"
http://www.rcuniverse.com/forum/fb.asp?m=6323187

RE: heaviest plane you'd fly precision with a 50cc?
my friend yak weight 21 pound dry with a DA 50 it did fly but it need more power than a DA 50 at that weight the IMAC basic was the only sequence it can fly so to answer your question as Pat Roy state 17 to 18 pounds should be the heaviest to fly precision with a 50cc it also depend on the engine because for example a bme 50 do not have the same power as the DA 50
Posted on: 9/3/2007 2:51 PM by Author "Hawk21" in the forum "Gas Engines"
http://www.rcuniverse.com/forum/fb.asp?m=6322406

RE: Any good ARF that works with a DA-50?
airwild extra 260, I think is the best 50cc out there
Posted on: 8/28/2007 12:49 AM by Author "Hawk21" in the forum "Giant Scale Aircraft - 3D & Aerobatic"
http://www.rcuniverse.com/forum/fb.asp?m=6296581

RE: How do you fill your tank ?
I use the sig electric pump
Posted on: 8/22/2007 2:25 PM by Author "Hawk21" in the forum "Giant Scale Aircraft - 3D & Aerobatic"
http://www.rcuniverse.com/forum/fb.asp?m=6272525

RE: Which engine for Lanier 87" 540 EDGE?
I know that this one is not on your list brilleli 60, those lanier plane have the tendency to be on the heavy side and they are big for a 50cc , I saw one flying with a fuji 64, good power but not enough for 3D
Posted on: 8/16/2007 8:57 AM by Author "Hawk21" in the forum "Gas Engines"
http://www.rcuniverse.com/forum/fb.asp?m=6245214

RE: ANY ONE USING AMSOIL ..2/CYCLE OIL?
I have been using amsoil 100:1 on a DA 100 and never had a problem in fact a have taken apart the engine and you can see the oil in the cylinder walls
Posted on: 7/24/2007 6:05 PM by Author "Hawk21" in the forum "Gas Engines"
http://www.rcuniverse.com/forum/fb.asp?m=6151402

RE: BIG BIRDS at TORKS
I really like the yak it looks awesome, did the purple edge had a hard landing? it looks like the prop break on one side and a muffler tilted back
Posted on: 7/23/2007 8:34 AM by Author "Hawk21" in the forum "Giant Scale Aircraft - 3D & Aerobatic"
http://www.rcuniverse.com/forum/fb.asp?m=6144996

RE: Best non-carbon prop for a DA-50 in a QQ Yak 54
you could start testing with a NX or Menz 22x10 My friend did a lot of testing with props from Mejzlick 22x10, NX 23x8, MSC 23x8 and finally he is using a Mejzlick 23x10 He decide for imac Mejzlick 23x10 for 3d NX 23x8 he does not have the same plane but selecting a prop depends on the variables silversurfer states above
Posted on: 7/23/2007 8:19 AM by Author "Hawk21" in the forum "Gas Engines"
http://www.rcuniverse.com/forum/fb.asp?m=6144965