RE: Futaba MC 9100A ESC
[quote]ORIGINAL: cmoulder I ordered one of these from Tower (OS version) and the programming box. What is the recommended timing for a Pletty Advance? I seem to recall reading 24 deg. [/quote] I use 24 as recommended. Henning
Posted on: 9/4/2012 2:09 PM by Author "Henning" in the forum "Electric Pattern Aircraft"
http://www.rcuniverse.com/forum/fb.asp?m=11217369

RE: Electric Vs Engine.
the entire WC, and the airplane, very sad. [/quote] That was Henning Jorkjend from Norway. [/quote] Yes... a good time at the WC meeting a lot of friendly people. Regards, Henning
Posted on: 8/26/2012 12:04 PM by Author "Henning" in the forum "RC Pattern Flying"
http://www.rcuniverse.com/forum/fb.asp?m=11206582

RE: Sebart's new pattern ship MYTHOS
[quote]ORIGINAL: bem Hi, Is it any info avaliable when the bigger 2 x 2 M Mythos will be available? Will it be this year or is next year most likely? I have noticed they use contra rotation props on the 2 x 2 M Mythos. /Bo [/quote] The Mythos Pro 2x2m will be available in Europe in September. I have made reservation for one from www.f3alorenz.de Henning
Posted on: 7/21/2012 1:16 AM by Author "Henning" in the forum "Electric Pattern Aircraft"
http://www.rcuniverse.com/forum/fb.asp?m=11163262

RE: Futaba MC 9100A ESC
=0&feat=directlink#5637386388885685970 Henning
Posted on: 7/20/2012 1:35 PM by Author "Henning" in the forum "Electric Pattern Aircraft"
http://www.rcuniverse.com/forum/fb.asp?m=11162746

RE: What is a good ESC for f3a
Mezon is still in testing. Henning
Posted on: 7/19/2012 11:45 PM by Author "Henning" in the forum "Electric Pattern Aircraft"
http://www.rcuniverse.com/forum/fb.asp?m=11162110

RE: What is a good ESC for f3a
to power. Henning
Posted on: 7/19/2012 1:27 PM by Author "Henning" in the forum "Electric Pattern Aircraft"
http://www.rcuniverse.com/forum/fb.asp?m=11161480

RE: Futaba MC 9100A ESC
) and they can pic and choose if they want to. Henning, can you adjust the PWM on the controller or is it set
Posted on: 5/15/2012 1:24 PM by Author "Henning" in the forum "Electric Pattern Aircraft"
http://www.rcuniverse.com/forum/fb.asp?m=11081922

RE: Futaba MC 9100A ESC
wind. Regards, Henning
Posted on: 5/13/2012 8:21 AM by Author "Henning" in the forum "Electric Pattern Aircraft"
http://www.rcuniverse.com/forum/fb.asp?m=11079057

RE: Spark Eliminator
[quote]ORIGINAL: OhD [quote]ORIGINAL: Henning [quote]ORIGINAL: f3a05 [quote]If I were to purchase another ESC I will go for another Futaba ESC. The Futaba ESC is almost half the price of the Spin99... I would have tried them. Henning [/quote] Thanks for the info. I tried to get more info and saw a discussion.../m_10891227/anchors_11077282/mpage_1/key_/anchor/tm.htm#11077282 Henning
Posted on: 5/11/2012 2:56 PM by Author "Henning" in the forum "Electric Pattern Aircraft"
http://www.rcuniverse.com/forum/fb.asp?m=11077283

RE: Futaba MC 9100A ESC
The instruction manual for OS and Futaba is the same. I only have the manual for Futaba in Japanese but had someone scan the manual in English for OS for me. Henning
Posted on: 5/11/2012 2:49 PM by Author "Henning" in the forum "Electric Pattern Aircraft"
http://www.rcuniverse.com/forum/fb.asp?m=11077282

RE: Spark Eliminator
had made anti spark connectors in 6mm I would have tried them. Henning
Posted on: 5/11/2012 1:09 PM by Author "Henning" in the forum "Electric Pattern Aircraft"
http://www.rcuniverse.com/forum/fb.asp?m=11077132

RE: Spark Eliminator
. The Futaba ESC is almost half the price of the Spin99. Regards, Henning
Posted on: 5/10/2012 12:02 PM by Author "Henning" in the forum "Electric Pattern Aircraft"
http://www.rcuniverse.com/forum/fb.asp?m=11076022

RE: Spark Eliminator
with the Plettenberg Advance. Regards, Henning
Posted on: 5/8/2012 10:27 AM by Author "Henning" in the forum "Electric Pattern Aircraft"
http://www.rcuniverse.com/forum/fb.asp?m=11073099

RE: New Plettenberg F3A motor
[quote]ORIGINAL: cmoulder [quote]I use both PT 21x13 and APC 21x13 with the Adcance but with a reduced throttle end point. I only use 80% power. Henning [/quote] What is the maximum wattage at that setting, and rpm as well? Now that I know the maximum output I can start scaling it down a bit.... I normally use 3200mAh on a P13 flying big and “fast� by European standard. Henning
Posted on: 3/16/2012 4:31 AM by Author "Henning" in the forum "Electric Pattern Aircraft"
http://www.rcuniverse.com/forum/fb.asp?m=11002355

RE: New Plettenberg F3A motor
[quote]ORIGINAL: nonstoprc I wonder a PT 21X13 would be too much for the motor. [/quote] I use both PT 21x13 and APC 21x13 with the Adcance but with a reduced throttle end point. I only use 80% power. Henning
Posted on: 3/16/2012 1:48 AM by Author "Henning" in the forum "Electric Pattern Aircraft"
http://www.rcuniverse.com/forum/fb.asp?m=11002248

RE: Sebart Wind S Pro
scheme. Henning
Posted on: 1/30/2012 12:53 PM by Author "Henning" in the forum "Electric Pattern Aircraft"
http://www.rcuniverse.com/forum/fb.asp?m=10935448

RE: Kontonik JIVE 120 HV Startup trouble: Any help?
own motors. My understanding is that Kontronik has focus on helicopters. Henning
Posted on: 1/30/2012 12:36 AM by Author "Henning" in the forum "Electric Pattern Aircraft"
http://www.rcuniverse.com/forum/fb.asp?m=10934608

RE: Falcon 20.5 X 14.5 Light Weight Props
[quote]ORIGINAL: Aussie_Knife_Edge Do you know where the Falcon props are made? Cheers, Jason. [/quote] China Regards, Henning
Posted on: 1/19/2012 1:43 AM by Author "Henning" in the forum "Electric Pattern Aircraft"
http://www.rcuniverse.com/forum/fb.asp?m=10916592

RE: Futaba MC 9100A ESC
Jon: what is the weight of your Jive 80 including heat sink, wire with noise filter and full length of cables to the motor and batteries? I assume you well be pretty close to the OS/Futaba ESC at 124 grams. The clamed weight of the Jive 80 on Kontroniks web page is probably added by the marketing department. Wondering if the OS/Futaba ESC works with Plettenberg Adcance 30-10? Henning
Posted on: 1/10/2012 4:21 AM by Author "Henning" in the forum "Electric Pattern Aircraft"
http://www.rcuniverse.com/forum/fb.asp?m=10901394

RE: Futaba MC 9100A ESC
Wondering if the Futaba, Robbe and the OS ESCs are the same products with different labels? OS is owned by Futaba and Futaba produce products for Robbe. http://www.os-engines.co.jp/Newproduct/esc111221/1100.html http://www.rc.futaba.co.jp/motor/index.html
Posted on: 1/7/2012 4:47 AM by Author "Henning" in the forum "Electric Pattern Aircraft"
http://www.rcuniverse.com/forum/fb.asp?m=10895981

RE: Futaba MC 9100A ESC
In Japan Futaba lists the ESC MC9100A at $258 and the programing box at $52. Both Akiba and Suzuki use this ESC. Regards, Henning
Posted on: 1/4/2012 11:04 AM by Author "Henning" in the forum "Electric Pattern Aircraft"
http://www.rcuniverse.com/forum/fb.asp?m=10891444

RE: Plettenberg Advance 30-10 Inrunner Test Data!
Hi Chad, Do you know if Schulze will start producing ESCs for F3A any time soon? With the 32.80KA out of production there are currently no ESCs available with a proportional break, as I know of. I have two Advance motors and only one 32.80KA. The other one went up in flames at the last WC. Regards, Henning
Posted on: 11/28/2011 1:51 PM by Author "Henning" in the forum "Electric Pattern Aircraft"
http://www.rcuniverse.com/forum/fb.asp?m=10833174

RE: Sebart Wind S Pro
Thanks Arch and Marty! Henning
Posted on: 11/7/2011 10:01 AM by Author "Henning" in the forum "Electric Pattern Aircraft"
http://www.rcuniverse.com/forum/fb.asp?m=10800963

RE: Sebart Wind S Pro
Hi, How is the quality of the «luxury bag set» for the Wind S Pro? Can it be compared to Oxai or to something sold by Hobby City? Thanks Henning
Posted on: 11/6/2011 9:13 AM by Author "Henning" in the forum "Electric Pattern Aircraft"
http://www.rcuniverse.com/forum/fb.asp?m=10799318

RE: Delro ADDICTION
% as the original Addiction by Starcraft instead of 9.5% I would probably not have used the turbulators. Henning
Posted on: 9/23/2011 12:20 PM by Author "Henning" in the forum "Electric Pattern Aircraft"
http://www.rcuniverse.com/forum/fb.asp?m=10730718

RE: Delro ADDICTION
of the wing. I have them on both sides of the wing. Regards, Henning Jorkjend
Posted on: 9/20/2011 2:39 PM by Author "Henning" in the forum "Electric Pattern Aircraft"
http://www.rcuniverse.com/forum/fb.asp?m=10726236

RE: New Sebart Wind 50E
I’m assembling a Wind 50 now and wondering if I need to reinforce the landing gear mounting area. Anyone who have had issues with it during “normal� landings on grass runways? Regards, Henning
Posted on: 9/11/2011 12:07 PM by Author "Henning" in the forum "Electric Pattern Aircraft"
http://www.rcuniverse.com/forum/fb.asp?m=10711549

RE: Plettenberg maintenance?
My old 30-10 Evo is currently at service at Plettenberg in Germany for bearing replacement. The motor has approx 500 flights. The main bearing had a ticking sound when I turned the motor by hand. 500 flights without maintenance of the motor is to me acceptable. Regards, Henning
Posted on: 8/31/2011 3:05 AM by Author "Henning" in the forum "Electric Pattern Aircraft"
http://www.rcuniverse.com/forum/fb.asp?m=10694636

RE: F3A World Scores
[quote]ORIGINAL: highfly3D were are the videos..... [>:] [/quote] Found some videos on Youtube from the WC. http://www.youtube.com/watch?v=TSCxTVBXuD0&feature=youtube_gdata_player Regards, Henning Jorkjend
Posted on: 8/9/2011 1:40 PM by Author "Henning" in the forum "RC Pattern Flying"
http://www.rcuniverse.com/forum/fb.asp?m=10663040

RE: Kontronik JIVE 80 HV
them about the problem. Kontronik advised Jive 120HV. Regards, Henning
Posted on: 7/19/2011 2:20 AM by Author "Henning" in the forum "Electric Pattern Aircraft"
http://www.rcuniverse.com/forum/fb.asp?m=10628155