Avionik DO6 problem??
Seeking help here: Have a Avionik DO6 electric pylon from Soaring USA and the pre-drilled Vertical stabs is clearly off the centre-line of the fuselage, as seen in the picture. Is this by default or is there a manufacturing fault here? Have sent a couple to emails to Soaring USA but no replies. Appreciate any help here. Thanks Henry
Posted on: 10/24/2011 6:23 PM by Author "Henry Chua" in the forum "Electric Pylon Racing"
http://www.rcuniverse.com/forum/fb.asp?m=10780940

Jim Fox EF2000
Hi, I have acquired a Jim Fox EF2000 recently and unfortunately it does not have the manual. Would appreciate if anyone can provide me the CG and throw details. Thanks in advance. Henry
Posted on: 9/26/2011 1:14 AM by Author "Henry Chua" in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=10734299

RE: Jetlegend 1/6 Scale F16
Thanks Ruizmilton / Imperio, very useful tip. Regards
Posted on: 4/12/2011 8:29 PM by Author "Henry Chua" in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=10459579

RE: Jetlegend 1/6 Scale F16
Hi Delahaye53, I will not be cutting the pipe but probably the bypass to enable the engine to sit further infront to the intake. The Pegasus is slightly longer than a P160 I think, that's why I'm facing with this issue. Also the engine mount has "L" shape support bracket below and I'm not too sure if the front mounting is strong enough to hold the engine. Any help is much appreciated. Regards
Posted on: 4/11/2011 2:34 AM by Author "Henry Chua" in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=10455623

RE: Jetlegend 1/6 Scale F16
not sit in the centre of the mount but more infront, is it correct? Regards Henry
Posted on: 4/11/2011 1:29 AM by Author "Henry Chua" in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=10455576

RE: Simple Smoke System set up
[quote]ORIGINAL: Jezza15 Excellent - Many Thanks What would be the best fuel to use in the smoke system tanks? - Is diesel ok? [/quote] Paraffin. Less messy tha diesel. Regards Henry
Posted on: 1/4/2011 11:30 PM by Author "Henry Chua" in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=10240567

GJC F-16 Operational Canopy
Need some advise on the Global Jet Club F-16 operational canopy for the 1/6 scale. Understand that it comes with the locking mechanism, frame and canopy, is it difficult to install? Any advise is much appreciated. Thanks Henry
Posted on: 11/9/2010 4:44 AM by Author "Henry Chua" in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=10124022

RE: Announcement from Juno R/C
Welcome to Singapore Derek. I'm sure you'll find this region very interesting and the only big issue is, we don't have big flying sites[:D] East to west of Singapore is only 49km looking forward to join us here in sunny island. Henry Singapore
Posted on: 10/24/2010 11:45 PM by Author "Henry Chua" in the forum "Extreme Speed Prop Planes"
http://www.rcuniverse.com/forum/fb.asp?m=10092111

RE: Wanted!
[quote]ORIGINAL: yf222000 Hello. What's the rating for your ECU? I am looking for one that runs the 22.5 lbs engine. Thanks for the response. [/quote] Hi, Mine's for 85N. Guess that wouldn't fit your requirement. Brgds Henry
Posted on: 12/20/2009 7:42 AM by Author "Henry Chua" in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=9345359

RE: Wanted!
Hi, Would the Simjet 85 gold ecu work for you? Have mine lying around as have converted to Orbit ECU for my 85. Thanks Henry
Posted on: 12/17/2009 12:47 AM by Author "Henry Chua" in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=9337463

RE: Scale working exhaust "feathers" aka Turkey feathers
of regret selling off the falcon. Best regards Henry
Posted on: 7/30/2008 4:41 AM by Author "Henry Chua" in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=7787671

RE: Calling Australian Jet Flyers........please help!
Hi Dave, There's no better place to stay in Australia except next to your house! Free ice-creams, Free beer, free kero and free turbine sound in the morning... [:D][:D] I'm moving with wife and kids.........here we come Big Dave....[:)] Best regards Henry Singapore
Posted on: 2/4/2008 7:14 PM by Author "Henry Chua" in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=7024454

RE: Help needed: TX Antenna
[quote]ORIGINAL: Dan767 Any antenna that will fit the radio and is the same length is fine. [/quote] Hi Dan, Thanks for the advise, will check out the various JR antenna here to find a replacement. Appreciate your help. Brds Henry
Posted on: 11/4/2007 12:51 AM by Author "Henry Chua" in the forum "RC Radios, Transmitters, Receivers, Servos, gyros"
http://www.rcuniverse.com/forum/fb.asp?m=6577933

Help needed: TX Antenna
I have broke my Graupner MC24 TX antenna and urgently needs a replacement but no luck so far. Can the JR antenna be used? Appreciate all help and advise. Thank you Henry
Posted on: 11/4/2007 12:16 AM by Author "Henry Chua" in the forum "RC Radios, Transmitters, Receivers, Servos, gyros"
http://www.rcuniverse.com/forum/fb.asp?m=6577811

RE: bosch hand air compressor
[quote]ORIGINAL: i3dm Does anyone know who makes these units ? i was trying to find one on Ebay but no luck.. [/quote] Is this what you are looking for? I had brought in 20 pieces and was gone in 2 days. Came with charger (220volts). Very handy......Still have one piece left if you are keen. Thanks Henry
Posted on: 7/3/2007 11:53 PM by Author "Henry Chua" in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=6068402

RE: Ultra RC Zero
Stuka, Thank you for the QC report on the zero, will take note on that. Henry
Posted on: 5/20/2007 11:25 PM by Author "Henry Chua" in the forum "RC Warbirds and Warplanes"
http://www.rcuniverse.com/forum/fb.asp?m=5880310

RE: Ultra RC Zero
Hi Scalebirdman, Thank you very for the detailed description. Certainly points worth taking note of. Still no answer from them yet on the shipping quote. May need your help if still no reply from them. Thank you once again. Best regards Henry
Posted on: 5/18/2007 5:10 AM by Author "Henry Chua" in the forum "RC Warbirds and Warplanes"
http://www.rcuniverse.com/forum/fb.asp?m=5869683

RE: Ultra RC Zero
Well I have trying to get a quote for shipping to Singapore but no avail. Have checked their dealers but they do not carry the Zero. Will do a serch here for any reports of this big Zero. Henry
Posted on: 5/17/2007 11:07 PM by Author "Henry Chua" in the forum "RC Warbirds and Warplanes"
http://www.rcuniverse.com/forum/fb.asp?m=5868888

Ultra RC Zero
Does anyone have any first hand comments, flight reports, quality on the Ultra RC “Scale-Master Series� 92" Mitsubishi Zero fighter? Looks exceptionally beautiful from their website http://www.ultra-rc.com/products/zero/index.htm Appreciate any comment on the Zero before deciding on ordering. Thank you. Henry
Posted on: 5/17/2007 10:55 PM by Author "Henry Chua" in the forum "RC Warbirds and Warplanes"
http://www.rcuniverse.com/forum/fb.asp?m=5868832

RE: Help with Simjet Engine Setup
[quote]ORIGINAL: Vampire Henry, your tubing assignment is correct. Digitech is has provided the best method for starter mounting alignment. [/quote] starter aligning is not that difficult. you take off the starter cover (starter itself) push the motor further in. place the starter over... full out verticle. Once again, thank you all for the advise. Best regards Henry
Posted on: 12/12/2006 8:20 AM by Author "Henry Chua" in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=5106144

RE: Help with Simjet Engine Setup
Great, thanks for the tip Mike. Best regards Henry
Posted on: 12/11/2006 10:25 AM by Author "Henry Chua" in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=5101909

RE: Help with Simjet Engine Setup
Hi Mike, Thank you very much for your help. Mine is the air start version but I have send it to my friends in Bangkok to modify it to electric start, that's why the mouth is separated. Only problem is that the front cover would have to be enlarged on the inner diameter to fit it in. Any other idea than to cut the cover? Best regards Henry
Posted on: 12/9/2006 8:46 PM by Author "Henry Chua" in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=5095797

Help with Simjet Engine Setup
Hi, I have a Simjet 85 which was running flawlessly, and after many flights decided to change the tubing connected to the fuel and propane. However after I disconnected them I have forgotten which tubing is for which purpose. I have attached a picture of it with the 3 tubing indicated, is it the correct label for the 3 tubing? Appreciate any help out there. Thank you Henry
Posted on: 12/8/2006 9:41 PM by Author "Henry Chua" in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=5092451

RE: SHIPPING CRATED JETS
Hi Doug, I'll let Jonathon knows when he's back from flight tmr. Perhaps you can check with BAX over in US for a quote first and see what it is like. Brgds Henry
Posted on: 12/1/2006 10:36 PM by Author "Henry Chua" in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=5064398

RE: SHIPPING CRATED JETS
. Reasonable price with good service. Brgds Henry
Posted on: 12/1/2006 10:21 PM by Author "Henry Chua" in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=5064331

RE: E2 Hawkeye Question
from Willhobby? Or where else can I buy this Hawkeye? May I know what's the price of it? Brgds Henry
Posted on: 11/1/2006 1:02 AM by Author "Henry Chua" in the forum "Twin & Multi Engine RC Aircraft"
http://www.rcuniverse.com/forum/fb.asp?m=4940822

RE: Robart 631 Retracts
[quote]ORIGINAL: lov2flyrc Henry, We have the sideframes in stock.... See [link=http://dreamworksrc.com/catalog/product_info.php?products_id=667]HERE[/link] Todd [/quote] Thanks Todd, have placed my order plus other stuff fm your website. Appreciate yr help Brgds Henry
Posted on: 10/18/2006 4:15 AM by Author "Henry Chua" in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=4882781

RE: Robart 631 Retracts
[quote]ORIGINAL: Chris True You need to change the side plates, the slots control the angles. I've done it on the smaller 530's. [/quote] Hi Chris, Thank you for your help. I will order the side plates from Robart to change it. Best regards Henry
Posted on: 10/16/2006 9:08 PM by Author "Henry Chua" in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=4876840

Robart 631 Retracts
I have purchased a set of the Robart 631RS retracts but realised that its 85 degree. Can't install it on the XL. Wanted to change to the 630 or 635 but no stock. Is there anyway I can convert the 631 to 630 which is 90 degree? By changing the trunion or cylinder etc....?? Appreciate any help on this issue. Thank you Henry
Posted on: 10/16/2006 6:02 AM by Author "Henry Chua" in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=4873586

RE: Perth Boating Tragedy
. Brgds Henry
Posted on: 10/5/2006 8:54 PM by Author "Henry Chua" in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=4833395