|
RE: Prop ballance tool
I use the Dubro prop balancer product #DUB499 I've had no issues on any of my props up to 23 inches
Posted on: 9/8/2011 6:13 PM by Author "Henry Pel"
in the forum "Questions and Answers"
http://www.rcuniverse.com/forum/fb.asp?m=10707942
RE: thread size for Hitec hs-5645MG
I believe the servo horn bolt for a hitec hs-5645 metal gear servo is a 2.6 x8mm NOTE: I have found some socket head bolts @ my LHS (used in HPI cars) in this size and prefer these to the phillips head Hope this helps
Posted on: 8/21/2011 8:09 PM by Author "Henry Pel"
in the forum "RC Radios, Transmitters, Receivers, Servos, gyros"
http://www.rcuniverse.com/forum/fb.asp?m=10680922
RE: HD digital servos
I have Power HD DS090M digitals on ailerons on my Goldwing SBach 342 rated 130 oz @ 11 ms Appears to work great, fast, center very well NOTE I stayed with Hitec 7985 for elavator and 7954 for rudder
Posted on: 8/6/2011 7:45 PM by Author "Henry Pel"
in the forum "RC Radios, Transmitters, Receivers, Servos, gyros"
http://www.rcuniverse.com/forum/fb.asp?m=10650555
RE: is there anything besides a wheel collar?
Have you tried Papco Pushnut Fasteners the 5/32" part # is 242-408 3/16" is 242-410 These flat, round type, spring steel fasteners are pushed on unthreaded rods, studs, etc. Used on nameplates, moulding studs and shafts. Stock No. Stud Size Outside Diameter Stock No. Stud Size Outside Diameter 242-401 1/16 .195" 242-413 .240 17/32" 242-403 3/32 .195" 242-414 1/4 17/32" 242-406 1/8 3/8" 242-416 5/16 5/8" 242-408 5/32 7/16" 242-418 3/8 3/4" 242-410 3/16 7/16" 242-422 1/2 1" NOTE: I still use a wheel lock collar but push one of these on after as additional security
Posted on: 5/24/2011 10:55 AM by Author "Henry Pel"
in the forum "Questions and Answers"
http://www.rcuniverse.com/forum/fb.asp?m=10538185
RE: Kadet Senior with ys 110
I'm currently running a Kadet Senior with an OS 91FX 3 blade 13 x 8 Master Airscrew and using a Sullivan SUL414 16oz tank NOTE converted to taildragger. Just make sure to add some extra tri-stock around the firewall.
Posted on: 4/14/2011 9:30 PM by Author "Henry Pel"
in the forum "Kit Building"
http://www.rcuniverse.com/forum/fb.asp?m=10463581
RE: Redwing 30cc Sbach Build
Has anyone done a Sbach 342 30cc with a canister muffler yet. I've just gotten started but could sure use some tips and tricks on how to go about installing a front drop canister Anybody got some pics and mounting suggestions
Posted on: 2/6/2011 3:35 PM by Author "Henry Pel"
in the forum "ARF or RTF"
http://www.rcuniverse.com/forum/fb.asp?m=10317350
RE: servo tester
You might also try the following site for their YTV Servo Cycler & Driver. works great for testing, ensure centering and cycling http://www.york-electronics.com
Posted on: 10/7/2010 7:21 PM by Author "Henry Pel"
in the forum "RC Radios, Transmitters, Receivers, Servos, gyros"
http://www.rcuniverse.com/forum/fb.asp?m=10054471
RE: CNC FOAM CUTTER SOFTWARE
The following are some of the Foam Cutting Software out there Foamworks http://www.foamwork.net/ GMFC Pro http://gm.cnc.free.fr FCut http://sourceforge.net/projects/fcut/files/
Posted on: 5/25/2010 3:48 PM by Author "Henry Pel"
in the forum "Scratch Building, Aircraft Design, 3D/CAD"
http://www.rcuniverse.com/forum/fb.asp?m=9758546
RE: I need a genius for my Taylorcraft 450
I have one of the Tcraft with a Dualsky 3530CA-12 and a Dualsky 25amp ESC and turning a 11x7 APC e prop ( talk to Doug @ HiFlight). It flies really docile if you want but definitely has plenty of power if you want to throw the TCraft around I have also been looking at the HK site and think the TG 3530 or possibly a 3536 outrunner might fit.
Posted on: 4/21/2010 9:11 PM by Author "Henry Pel"
in the forum "Electric General Discussion"
http://www.rcuniverse.com/forum/fb.asp?m=9679209
RE: GMS engines
I have seen a few of the .47 and also .76 with the carb pinch bolt oriented incorrectly. Make sure that the pinch bolt is drawing the carb cylinder down into the engine body. You may have to reverse the pinch bolt so it draws the carb down when you tighten the pinch bolt nut.
Posted on: 2/15/2010 12:15 PM by Author "Henry Pel"
in the forum "Sport Flying"
http://www.rcuniverse.com/forum/fb.asp?m=9506449
RE: accucel 6 charger question
>quote: >ORIGINAL: TomBates >Go to Hobby King, they have them on sale for $19.99. >quote: >ORIGINAL: keredg >Just as matter of interest i see the accucel 6 is on offer at $29.99, think i'll get a spare >Thats where i got mine and saw the price, now $24.99, can't see it at $19.99 though If you go to their site and order one of the Accell 6 50w chargers it prices at $24.99 with an instant account credit of $5.00
Posted on: 2/11/2010 2:37 PM by Author "Henry Pel"
in the forum "Batteries & Chargers"
http://www.rcuniverse.com/forum/fb.asp?m=9495951
RE: DXF Reader
Try SolidWorks EDrawing The latest Viewer available is Edrawings 2010 from Solidworks http://www.solidworks.com/sw/downloads.htm
Posted on: 12/26/2009 10:55 PM by Author "Henry Pel"
in the forum "Kit Building"
http://www.rcuniverse.com/forum/fb.asp?m=9362474
RE: advice: which mini table saw to buy?
Try this fellow out on Ebay http://cgi.ebay.com/DREMEL-580-TABLE-SAW-MANY-ACCESSORIES-GREAT-COND_W0QQitemZ260472110825QQcmdZViewItemQQptZLH_DefaultDomain_0?hash=item3ca558fee9&_trksid=p3911.c0.m14 He on occasion has complete re-conditioned Dremel 580 Hobby table saws for sale. I happened to get one from him and they are excellent.
Posted on: 9/12/2009 3:22 PM by Author "Henry Pel"
in the forum "Tips & Techniques"
http://www.rcuniverse.com/forum/fb.asp?m=9089805
RE: tgy 52 cc
May I also get a copy of the TGY52 manual please An additional question/request Prop center bolt I believe it's 10x1.5x55mm Is there an optional prop center bolt available for use with a spinner pre-drilled to allow a 4mm bolt
Posted on: 3/20/2009 1:17 PM by Author "Henry Pel"
in the forum "Gas Engines"
http://www.rcuniverse.com/forum/fb.asp?m=8597573
RE: SPE 26 Ignition
Some of the very early SPE26cc came with the melody ei but I also have one of his SPE26cc and it had the later updated ei try talking to Cermark. They have taken over warranty etc.. of the SPE engines that BCMA sold
Posted on: 2/27/2009 1:18 PM by Author "Henry Pel"
in the forum "Gas Engines"
http://www.rcuniverse.com/forum/fb.asp?m=8524702
RE: TGY 52
Does anyone know the center bolt size for the TGY52 I believe it's 10x1.5x60mm but really would like to confirm before ordering a replacement from Tru-turn to use with my TT Spinner TT's suggested bolt adapter is prod# TT-0115-A or has anyone drilled the existing center bolt sucessfully
Posted on: 2/10/2009 6:20 PM by Author "Henry Pel"
in the forum "Gas Engines"
http://www.rcuniverse.com/forum/fb.asp?m=8462356
RE: WIN A FREE Scale Fuselage from V-East & Graupner Helis
Please enter me. Copter looks very interesting Henry Pel
Posted on: 1/5/2009 11:41 AM by Author "Henry Pel"
in the forum "RC Helicopter General Discussions"
http://www.rcuniverse.com/forum/fb.asp?m=8321225
RE: Need Stranded Servo Wire
You might also try www.thunderboltrc.com 50 feet of Bulk Servo Wire (Silicone 22AWG Heavy Duty) Heavy Duty Servo Wire (22AWG) Silicone servo wire
Posted on: 12/9/2008 11:06 AM by Author "Henry Pel"
in the forum "RC Radios, Transmitters, Receivers, Servos, gyros"
http://www.rcuniverse.com/forum/fb.asp?m=8228296
RE: TGY 52
Has anyone used an alternative muffler to the stock one supplied?? ie: (Inverted Pittts Style muffler ) Will a DA50, DL50, etc.... solution work on the TGY52 or are they different ?? I'm seriously contemplating one of these motors but would prefer to use an Inverted Pitts style muffler Any help would be greatly appreciated.
Posted on: 11/3/2008 11:58 AM by Author "Henry Pel"
in the forum "Gas Engines"
http://www.rcuniverse.com/forum/fb.asp?m=8110915
RE: What Truturn Prop Adapter for SPE 26cc??
finally got a chance to look up the spinner & adapter kit spinner was TT-3002-B-WL this was a lightened backplate properly drilled for a BCMA SPE26 also an adapter kit TT-0816-A (8 mil prop bolt) Hope you find this useful Note I had them transact it through Great Hobbies (Edmonton store) but I had initial conversation direct with Tru-Turn and specs confirmed with Adam from BCMA engines. Hopefully Tru-turn still has these specs on file. Additional Note SPE -26 could have 2 different prop bolt options 8mm prop bolt or 10mm prop bolt?
Posted on: 9/12/2008 11:30 PM by Author "Henry Pel"
in the forum "ARF or RTF"
http://www.rcuniverse.com/forum/fb.asp?m=7948809
RE: What Truturn Prop Adapter for SPE 26cc??
I had Tru-Turn do a spinner for my BCMA SPE26 gasser engine. I'll have to check tru-turn part numbers tonight.
Posted on: 9/11/2008 11:02 AM by Author "Henry Pel"
in the forum "ARF or RTF"
http://www.rcuniverse.com/forum/fb.asp?m=7943187
RE: Power Strip
Is this what you were talking about. http://www.servocity.com/html/servo_power_boards.html If you do get one please let me know how well it works
Posted on: 2/19/2008 10:41 PM by Author "Henry Pel"
in the forum "RC Radios, Transmitters, Receivers, Servos, gyros"
http://www.rcuniverse.com/forum/fb.asp?m=7104684
RE: Prop For DualSky XM3530CA-14
I've got the XM3530CA-12 on an Eflite Ultra MiniStik with an 11x8e APC prop. Check on Dualsky site for the spreadsheet showing the various specs and recomended props. the 3530-14 does allow for 8x5 thru 12x6 prop
Posted on: 10/24/2007 9:49 PM by Author "Henry Pel"
in the forum "Brushed/Brushless motors, speed controls, gear drives"
http://www.rcuniverse.com/forum/fb.asp?m=6535020
RE: Operating instructions
tower pro mag 8 30 amp speed controller attached is a pdf file I got from the tower pro web site Hopefully this helps out
Posted on: 10/11/2007 9:09 PM by Author "Henry Pel"
in the forum "Brushed/Brushless motors, speed controls, gear drives"
http://www.rcuniverse.com/forum/fb.asp?m=6479214
RE: BCMAEngines
Adam Again fantastic service. the muffler bolts arrived today. If the weather holds out I may get that Seagull Super Star with the BCMA 26cc gasser up yet this year Henry Pel
Posted on: 10/9/2007 11:41 PM by Author "Henry Pel"
in the forum "Gas Engines"
http://www.rcuniverse.com/forum/fb.asp?m=6471807
RE: Lithium Battery for 9c Radio
Try the following sites 1) www.commonsenserc.com NOTE my preference is True RC good prices and great Lipo transmitter(s) solutions 2) www.truerc.net/ Canada & US sites
Posted on: 10/9/2007 11:20 PM by Author "Henry Pel"
in the forum "RC Radios, Transmitters, Receivers, Servos, gyros"
http://www.rcuniverse.com/forum/fb.asp?m=6471732
RE: Towing a trailer with a Dodge Caravan
I've had two Caravan's first 2000 Grand Caravan - w/ 3.8 NOTE it had the upgraded suspension and tranny cooler -> just no hitch from factory towed a 12 foot hardtop camping trailer no problems through western Canada mountains. 2'nd is 2003 Grand with same 3.8 - has heavy duty transmission and tranny cooler but no quite as heavy suspension - did a test tow on a 17-19 foot hardside trailer - did pull it but boy did it need trailer anti sway bars Make sure to have at least the tranny cooler and preferably the heavy trans.
Posted on: 1/3/2007 10:03 PM by Author "Henry Pel"
in the forum "Questions and Answers"
http://www.rcuniverse.com/forum/fb.asp?m=5206392
RE: Kadet Senior with OS 70 Surpass - Prop Clearance?
I trained on one of these with an OS .91 FX with a 13 x 6 tri-blade, Boy does it ever fly nice - so nice in fact I bought two of these ARFs and am setting up with the same OS .91 FX and the other with a GMS .76 but converting both to tail-dragger. I found TNT Landing Gear has a great aluminum gear Part # LG4-156 ( little taller gear) => lots of clearance I intend on turning a 14 x 5 or maybe even a 15x5 or 6 prop Bruce Tharpe has a great tailwheel kit used for his Flying King that appears to really work great on the Kadet Senior. I know SIG refers to this plane as a .40 -.46 but the bigger motor is the way to go.
Posted on: 9/1/2006 11:02 AM by Author "Henry Pel"
in the forum "ARF or RTF"
http://www.rcuniverse.com/forum/fb.asp?m=4697087
RE: What ARF would you like to see as a kit?
I'd really like to see the Hanger 9 Ultrastick 60
Posted on: 8/25/2006 10:36 AM by Author "Henry Pel"
in the forum "Kit Building"
http://www.rcuniverse.com/forum/fb.asp?m=4667843
RE: Vacuum Pump where to get one
Have you tried Harbor freight They had some Automotive Vacuum pumps the old R11 and R134 approximately $15 to $18 dollars I was interested in until trying to get one shipped to Canada Cost more to ship than initial unit price) Henry Pel
Posted on: 4/11/2006 2:53 PM by Author "Henry Pel"
in the forum "Composites Fabrication And Repair"
http://www.rcuniverse.com/forum/fb.asp?m=4152509
| 
