RE: Seven Reds came today
Normally 9 but only flying 7 in tribute to the 2 that died. Fly all 9 in tansit to shows. Ian.
Posted on: 9/3/2012 8:55 AM by Author "Ian Burridge" in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=11215668

RE: Jetpower 2012
Dont forget you also need to carry breathalyser in the car in france as well. Also an on the spot fine. £5 from halfords. Nice to know that they want visitors! Ian.
Posted on: 8/31/2012 11:16 AM by Author "Ian Burridge" in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=11212732

RE: Jetpower 2012
Marc, Not us, on 8-30 ferry. Ian.
Posted on: 8/31/2012 5:30 AM by Author "Ian Burridge" in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=11212451

RE: Jetpower 2012
Eyes on lots but like the MB346. Ian.
Posted on: 8/27/2012 3:11 AM by Author "Ian Burridge" in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=11207299

RE: Jetpower 2012
3 of us from Southampton travelling Thusday. Make sure of plenty of cash and an empty vehicle for the bits to bring back!! Ian.
Posted on: 8/25/2012 9:44 AM by Author "Ian Burridge" in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=11205539

RE: C&C Model M346 build and painting thread
Phil, Gone very quiet, have you hit a problem? Ian.
Posted on: 8/19/2012 12:39 AM by Author "Ian Burridge" in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=11198412

RE: P-80se start issue
Kelly, Mine will sometimes stick and just needs a flick to spin over. As mine is in a Viper I have a carbon rod i put up the tailpipe to flick. Not sure if it is sticky bearings or the o ring/clutch but has done it from new. Ian.
Posted on: 8/5/2012 12:47 AM by Author "Ian Burridge" in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=11181365

RE: Hangar 9 .60 P-51 with DLE20.
kiwibob, Hurry up and get finished as you will love it. Mine is done out electric on 8s lipo and flies like a warbird should. No mixing when flaps deployed and yes you can bring it in long and slow with a little power on full flap. CG is middle of the range suggested but aileron is 60 0/0 of recomended. No idea of weight as I never weigh any of my models. Ian.
Posted on: 6/13/2012 6:25 AM by Author "Ian Burridge" in the forum "ARF or RTF"
http://www.rcuniverse.com/forum/fb.asp?m=11116619

RE: 'JMA TOPGUN 2012' RNAS MERRYFIELD MAY 19/20
Just back from a great days flying. A BIG thank you to Jamie and all for organising it. I hate to think how much kero was used with the amout of flights had, 4 in the air all day. Ian.
Posted on: 5/20/2012 10:28 AM by Author "Ian Burridge" in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=11087714

RE: Der Jet Cougar Owners
Steve, I had to replace a tyre having had a brake lock and it would not hold air. Take the rim apart and reseat the tyre and o ring and you should be fine, Prob not a good seat. Ian.
Posted on: 3/4/2012 1:46 AM by Author "Ian Burridge" in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=10985690

RE: Sebart Pilatus PC-21
Ian, The 16s is for a 6s pack and the 14 is for a 5s. Both same size and same prop. Fitted 16s in the Sebart MC72. Ian.
Posted on: 1/10/2012 12:49 AM by Author "Ian Burridge" in the forum "ARF or RTF"
http://www.rcuniverse.com/forum/fb.asp?m=10901290

RE: Comp ARF BAE Hawk build thread
David, Are you coming to classic jets tommorrow? If so will bring my canopy so you can see how I fitted cockpit. Ian.
Posted on: 12/29/2011 1:45 AM by Author "Ian Burridge" in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=10880796

RE: There I was thinking it was just us RC pilots who flew too low!
Looks like an Alphajet? Ian.
Posted on: 12/25/2011 10:52 AM by Author "Ian Burridge" in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=10875665

RE: Comp ARF BAE Hawk build thread
Fireblade, Is it a straight run for the cable feeding the wingtip nav lights and how did you make the lens covers? Ian.
Posted on: 11/25/2011 4:15 AM by Author "Ian Burridge" in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=10828063

RE: Classic Jets
Just back from a super cj. Over 160 people came, 29 degrees and light wind! 7/8 planes in queue to fly all day and 4/5 in air all the time. Never seen it so packed. Successful first flight on carf hawk as well. Dick - can you organise same weather for Dec? Ian
Posted on: 9/30/2011 9:42 AM by Author "Ian Burridge" in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=10742097

RE: DerJet Cougar in the UK
Yes, just the wing and body flaps together for landing.
Posted on: 9/27/2011 7:04 AM by Author "Ian Burridge" in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=10736339

RE: DerJet Cougar in the UK
Tow, Never use them on mine, just flaps for landing. Ian.
Posted on: 9/27/2011 3:06 AM by Author "Ian Burridge" in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=10736070

RE: Epoxy gun applicator
Carlos, If you have access to Radio Spares they do them and the nozzles. Look them up as they do mail order. Ian.
Posted on: 9/7/2011 11:44 AM by Author "Ian Burridge" in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=10705881

RE: JETPOWER 2011 : what are the expected highlights not to be missed on the runway and in the stands ?
If Aldridge buys a round someone take a picture!!!
Posted on: 9/1/2011 10:47 AM by Author "Ian Burridge" in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=10696907

RE: Viper Jet 2M Pointers/ tips.
My tailpipe was the same using P80se but just left it long as it dosn't show with the silver tail cone. Had to trim it in the end as was 1" to long for the car when taking 2 jets! It is a real pain to cut but can be done with a dremal cut off wheel BUT the spacer between the inner and outer pipe will have to be taken off and reinstalled. Ian.
Posted on: 9/1/2011 10:44 AM by Author "Ian Burridge" in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=10696902

RE: Red arrow crashes at air display
From a friend who lives alongside crash site that they pulled the pilot from the river, almost certainly dead.[&o]
Posted on: 8/20/2011 10:55 AM by Author "Ian Burridge" in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=10678845

RE: Futaba 12z / 14MZ gear sequencing built in :)
All, I do not even use a mix, just servo slow. Gear down then doors at normal speed and gear on slow. going up then gear at normal and doors at slow. Set at 20 on the screen with gear/doors on seperate channels of the same 2 pos switch. Works fine on viper jet and carf hawk. Ian.
Posted on: 6/17/2011 12:06 PM by Author "Ian Burridge" in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=10579000

RE: Comp ARF BAe Hawk Build Thread
Ian, I drilled a small hole vertical into the carbon tube and put a 2mm c/s bolt in. Totally hidden by tailplane but easy to remove! My fin is tight when front bolt is in so not adding anything else. How do you fit the scale cockpit when the steering servo comes up into the space needed?? Pics would help. Ian.
Posted on: 6/8/2011 11:51 AM by Author "Ian Burridge" in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=10563466

RE: Jet Flyers in New Zealand
Ross/Roger, Thanks for coming back so fast. It was going to be Feb/march but now looks like the end of Oct. No not for the rugby! A 2 hour drive would be ok as I could make a day of it. I will pm you when dates are confirmed but that may not be till the middle of the year. Ian.
Posted on: 1/12/2011 11:21 AM by Author "Ian Burridge" in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=10258177

Jet Flyers in New Zealand
Hi, I am coming out to Thames in North Island later this year and wondered if there are any jet pilots/clubs within a reasonable distance? Thanks, Ian.
Posted on: 1/11/2011 11:11 AM by Author "Ian Burridge" in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=10255542

RE: My new X-Treme Jets 2m Viper
Rod, I mounted my air tanks in the wing roots 1 each side. Fills a wasted space. Also put my retract/brake valves on the front plate. Ian.
Posted on: 12/16/2010 11:16 AM by Author "Ian Burridge" in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=10200805

RE: Reaction ARF - PST/BTE All-Composite Sport Jet
David, I didn't bother on mine and having flown it all year I don't think it would make a big difference. The flaps slow it right down to a hover in wind with the shortest run being 25feet from touch down to stop!! Save yourself the trouble. Ian.
Posted on: 11/29/2010 2:18 PM by Author "Ian Burridge" in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=10167042

RE: JMA TOPGUN - RNAS MERRYFIELD MAY 22 2011
Jamie, Will this do? Ian.
Posted on: 11/15/2010 2:19 PM by Author "Ian Burridge" in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=10136881

RE: JMA TOPGUN - RNAS MERRYFIELD MAY 22 2011
Jamie, If it half as good as last year then it will still be a great day, see you there. Ian.
Posted on: 11/15/2010 3:37 AM by Author "Ian Burridge" in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=10135974

RE: AirPower Five Action Multi-function Valve...?
Just a thought, have you plugged the extra valve in the right way round as the jr type plug is very easy to get wrong?
Posted on: 10/28/2010 6:36 AM by Author "Ian Burridge" in the forum "RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=10099466