RE: Honey Bee King 2 and E-Flite Blade 400 parts...
www.jaghobbies.com We have quite a few of the HBK2 parts in stock and what we don't have we can usually find for you. We ship from Tiffin, Ohio. Thanks, Jim
Posted on: 7/19/2012 9:17 AM by Author "JAG Hobbies" in the forum "Electric RC Helis"
http://www.rcuniverse.com/forum/fb.asp?m=11161187

RE: ESky 0406A Transmitter
Did you get what you needed? We have quite a few EK2-0406A transmitter parts in stock. It would be easier than replacing components. Jim JAG Hobbies www.jaghobbies.com
Posted on: 3/30/2011 5:55 PM by Author "JAG Hobbies" in the forum "Esky Helicopters"
http://www.rcuniverse.com/forum/fb.asp?m=10433468

RE: Where to buy StarMax in USA?
We have recently started carrying the Starmax jets. We have 10 different versions in stock and plan on getting more in the next couple weeks. Let me know what you're looking for and I'll give you a quote. http://www.jaghobbies.com/rc_planes/starmax.htm Jim JAG Hobbies www.jaghobbies.com
Posted on: 12/9/2010 2:11 PM by Author "JAG Hobbies" in the forum "Electric RC Jets"
http://www.rcuniverse.com/forum/fb.asp?m=10186873

RE: honey bee king 2
Channel 1 - Aileron (left rear servo) Channel 2 - Elevator (front servo) Channel 3 - Speed Control Channel 4 - Gyro Channel 5 - Signal for Head Lock Gyro Channel 6 - Pitch (right rear servo) Jim JAG Hobbies www.jaghobbies.com
Posted on: 5/8/2010 8:29 AM by Author "JAG Hobbies" in the forum "Esky Helicopters"
http://www.rcuniverse.com/forum/fb.asp?m=9719010

RE: Looking for a RTF 2.4GHz package for around $300
If you're still looking for the Walkera Creata 400 or even the HM60#B, we are clearing out some inventory and offering $50.00 in free parts with every helicopter purchased. Purchase price of the helicopter is $299.00 plus shipping. Thanks, Jim JAG Hobbies www.ajghobbies.com
Posted on: 6/17/2009 12:32 PM by Author "JAG Hobbies" in the forum "Walkera Helis - Dragonfly, etc.."
http://www.rcuniverse.com/forum/fb.asp?m=8859344

RE: WALKERA 60
We are currently clearing out some Walkera Creata 400 and HM60#B inventory. We are offering the helicopters at $299.00 with $50.00 in free parts with every helicopter purchased. We have also lowered the price on all of our Walkera parts. These items are in stock in the US and will ship out the day after payment is received. Thanks, Jim JAG Hobbies www.jaghobbies.com
Posted on: 6/17/2009 12:26 PM by Author "JAG Hobbies" in the forum "Walkera Helis - Dragonfly, etc.."
http://www.rcuniverse.com/forum/fb.asp?m=8859332

Walkera Creata 400 R/C Helicopter Parts
Website: www.jaghobbies.com Thanks, Jim JAG Hobbies www.jaghobbies.com
Posted on: 6/9/2009 9:40 PM by Author "JAG Hobbies" in the forum "Walkera Helis - Dragonfly, etc.."
http://www.rcuniverse.com/forum/fb.asp?m=8839769

Looking for a Good 3D Pilot
We are currently looking for a good 3D helicopter pilot to do some videos for advertising purposes. If interested, please contact me at jgase@jaghobbies.com. Thanks, Jim JAG Hobbies www.jaghobbies.com
Posted on: 4/5/2009 1:17 PM by Author "JAG Hobbies" in the forum "Walkera Helis - Dragonfly, etc.."
http://www.rcuniverse.com/forum/fb.asp?m=8648691

Walkera Creata 400 and HM60#B Now Available!!
We are now carrying the Walkera Creata 400 and HM60#B. we also have all of the repair parts in stock. Mention this post and get either helicopter for $299.00 (we pay the shipping). Jim JAG Hobbies www.jaghobbies.com
Posted on: 12/15/2008 5:20 PM by Author "JAG Hobbies" in the forum "Walkera Helis - Dragonfly, etc.."
http://www.rcuniverse.com/forum/fb.asp?m=8248792

RE: New HBK3 & Belt CP v2 now in stock
I don't understand your comment. We currently have the FM versions of both helicopters in stock and we are taking pre-oreders for the 2.4 GHz version. Jim JAG Hobbies
Posted on: 11/20/2008 12:09 PM by Author "JAG Hobbies" in the forum "Esky Helicopters"
http://www.rcuniverse.com/forum/fb.asp?m=8166087

RE: Honey Bee King v3 RTF or Belt CP v2 RTF
We now have these helicopters in stock: Honey Bee King 3: http://www.jaghobbies.com/rc_planes/hbk3.htm Belt CP v2: http://www.jaghobbies.com/rc_planes/beltcp2.htm Thanks, Jim JAG Hobbies www.jaghobbies.com
Posted on: 11/19/2008 1:01 PM by Author "JAG Hobbies" in the forum "Esky Helicopters"
http://www.rcuniverse.com/forum/fb.asp?m=8162880

RE: New Version of Honey Bee King
Sorry, no. Jim
Posted on: 9/3/2007 6:10 PM by Author "JAG Hobbies" in the forum "Esky Helicopters"
http://www.rcuniverse.com/forum/fb.asp?m=6323196

RE: New Version of Honey Bee King
I make them from brass tubing. Jim
Posted on: 8/30/2007 8:55 PM by Author "JAG Hobbies" in the forum "Esky Helicopters"
http://www.rcuniverse.com/forum/fb.asp?m=6308677

RE: New Version of Honey Bee King
In order to use the Esky carbon fiber blades with the metal blade grips you will need to drill out the hole and insert a new bushing. Jim
Posted on: 8/30/2007 4:39 PM by Author "JAG Hobbies" in the forum "Esky Helicopters"
http://www.rcuniverse.com/forum/fb.asp?m=6307734

RE: New Version of Honey Bee King
Looks like esky has more. We will be getting more in later this week. Jim JAG Hobbies.
Posted on: 8/20/2007 7:49 PM by Author "JAG Hobbies" in the forum "Esky Helicopters"
http://www.rcuniverse.com/forum/fb.asp?m=6264387

RE: New Version of Honey Bee King
If you're not happy with the set-up on the helicopter, you can send it back and we'll go through it checking everything out and get it back to you in excellent flying condition. We have also changed our approach on these helicopters and all helicopters will be pre-inspected before they are sent out. Jim
Posted on: 7/5/2007 12:36 PM by Author "JAG Hobbies" in the forum "Esky Helicopters"
http://www.rcuniverse.com/forum/fb.asp?m=6073725

RE: New Version of Honey Bee King
Here's where the antenna tube is located. Just below the instructions in the picture. Jim
Posted on: 6/28/2007 9:00 PM by Author "JAG Hobbies" in the forum "Esky Helicopters"
http://www.rcuniverse.com/forum/fb.asp?m=6048232

RE: New Version of Honey Bee King
I don't remember what the Futaba radio is but you need to have a transmitter with the same frequency and a negative shift. To route the antenna, use the tube that comes with the helicopter. It's in the foam packing on the top where the instructions are. Push it through the two holes in the skid and run the antenna through it. Jim
Posted on: 6/28/2007 7:38 PM by Author "JAG Hobbies" in the forum "Esky Helicopters"
http://www.rcuniverse.com/forum/fb.asp?m=6047927

RE: New Version of Honey Bee King
The replacement main rotors are EK4-0004 on the bottom of the spare parts list. Anything purchased with the helicopter will be shipped with the helicopter for a total shipping charge of $15.00. All of our helicopters are insured. We will replace any defective parts or anything that is damaged in transit. Sorry, can't cover the damages from crashes. Jim
Posted on: 6/28/2007 4:36 PM by Author "JAG Hobbies" in the forum "Esky Helicopters"
http://www.rcuniverse.com/forum/fb.asp?m=6047199

RE: New Version of Honey Bee King
We have plenty of the brushless motors, speed controls, and pinions listed on our site in stock. I put the EK5-0080 on mine but I haven't had a good chance to try it out. My brushed motor was still running but it would ocassionally get stuck in a dead spot after landing. Plenty of people are purchasing the EK5-0006 also. The specs are as follows: EK5-0004 - 40g, 28 mm lg, 25.9 mm dia., 2.3 mm shaft dia., 3100 rpm/v, 1.5 A, 80 % max efficiency, 13 A max current, 25 A speed control req'd EK5-0006 - 58g, 28 mm lg, 27.7 mm dia., 2.3 mm shaft dia., 3800 rpm/v, 2.0 A, 80 % max efficiency, 20 A max current, 25 A speed control req'd The EK5-0006 is a little bigger than needed for normal flight but helps for 3D. Jim
Posted on: 6/27/2007 8:17 PM by Author "JAG Hobbies" in the forum "Esky Helicopters"
http://www.rcuniverse.com/forum/fb.asp?m=6043273

RE: New Version of Honey Bee King
No idea on the gyro. We will soon be carrying the e-sky heading lock gyro. I tried to install the metal parts but the blade grips won't work without the central holder set. The locknut is an M3 thread. Jim
Posted on: 6/27/2007 6:52 PM by Author "JAG Hobbies" in the forum "Esky Helicopters"
http://www.rcuniverse.com/forum/fb.asp?m=6042952

RE: New Version of Honey Bee King
Sorry for the delay. I don't see that we ever received an e-mail and I don't always log on to RC Universe. However, I just just responded to the pm. Normaly we respond to all e-mails within a day and usually in the evening. All shipments go out the day after payment is received. In order to keep costs down we don't currently accept credit cards. We can accept them through PayPal and you can still send payment even if you don't have a PayPal account. We can send an invoice from them. It's been really busy lately with the delay in the shipment and we got a little behind. We are now caught up and it shouldn't happen again. Thanks for your understanding, Jim
Posted on: 6/25/2007 5:19 PM by Author "JAG Hobbies" in the forum "Esky Helicopters"
http://www.rcuniverse.com/forum/fb.asp?m=6033225

RE: New Version of Honey Bee King
The brushless motors use a 9T pinion. Jim
Posted on: 6/23/2007 9:41 PM by Author "JAG Hobbies" in the forum "Esky Helicopters"
http://www.rcuniverse.com/forum/fb.asp?m=6025624

RE: New Version of Honey Bee King
Make sure you wait for the gyro to calibrate before trying to fly it. If you move the tail servo arm before it's done calibrating it won't work. You'll know it's done when the light changes and the servo moves a little bit. Jim
Posted on: 6/21/2007 9:16 PM by Author "JAG Hobbies" in the forum "Esky Helicopters"
http://www.rcuniverse.com/forum/fb.asp?m=6018064

RE: New Version of Honey Bee King
Don't worry about the delay. I've got another order coming in through the post office. Jim Jag Hobbies
Posted on: 6/21/2007 4:28 PM by Author "JAG Hobbies" in the forum "Esky Helicopters"
http://www.rcuniverse.com/forum/fb.asp?m=6016954

RE: New Version of Honey Bee King
I just placed another order and I am having it shipped by another method. It should be in soon. The first one is still hung up in California. Sorry for the delay. Jim
Posted on: 6/20/2007 6:24 AM by Author "JAG Hobbies" in the forum "Esky Helicopters"
http://www.rcuniverse.com/forum/fb.asp?m=6010941

RE: New Version of Honey Bee King
We're actually a little low on parts right now. We weren't real sure how well these would sell. Now that we know, we have a large supply of parts coming in with the new helicopters. We shouldn't be running out any time soon.
Posted on: 6/17/2007 7:17 AM by Author "JAG Hobbies" in the forum "Esky Helicopters"
http://www.rcuniverse.com/forum/fb.asp?m=5997770

RE: New Version of Honey Bee King
To order, just e-mail me at jgase@jaghobbies.com or click on the order from and fill it out on the front page at www.jaghobbies.com
Posted on: 6/16/2007 11:20 PM by Author "JAG Hobbies" in the forum "Esky Helicopters"
http://www.rcuniverse.com/forum/fb.asp?m=5997030

RE: New Version of Honey Bee King
First I want to thank all of you who have purchased the e-sky Honey Bee King II from us. Sorry for the delay but e-sky was out of stock on some of the items we wanted and postponed our order. They have been shipped to us and should arrive by monday or tuesday. For all of you that have prepaid, we will be adding a set of spare blades to the order at no charge. When the order comes in, we will have the helicopters in both colors, bare bones kit, all available spares, and all of e-sky's hop-up parts. We will also be carrying the carbon fiber version as soon as it's available. As far as the belt alignment goes, I found that the best way to center the pulley is to make a new spacer for under the drive pulley and drill a hole in the main shaft at 90 degrees to the original at the increased height. We are considering offering the main shaft with spacer at the same price as the main shaft, if there is enough interest. Please e-mail if you are. jgase@jaghobies.com Pricing on the Honey Bee King II is going to stay the same as before at $149.99 plus shipping. Due to the latest changes in the Post Office rates, all shipping of helicopters is going to be $15.00. You may also add any additional parts to the order with no additional shipping added. Shipping costs on the parts is $3.00 no matter how many you buy and there is no minimum. Thanks, Jim
Posted on: 6/16/2007 7:13 PM by Author "JAG Hobbies" in the forum "Esky Helicopters"
http://www.rcuniverse.com/forum/fb.asp?m=5996064

RE: esky Honey Bee and Honey Bee 2 Parts
Sorry for the delay. Yes, we have them. Jim
Posted on: 6/10/2007 11:27 AM by Author "JAG Hobbies" in the forum "Electric RC Helis"
http://www.rcuniverse.com/forum/fb.asp?m=5968517