|
RE: MVVS 40cc oil
Hi, and a short movie. Regards, Mugurel http://www.rcvideo.ro/media/161/MVVS_40ccm_benzina/
Posted on: 10/23/2009 12:13 AM by Author "JIMMYMUGUREL"
in the forum "MVVS Support"
http://www.rcuniverse.com/forum/fb.asp?m=9195126
RE: MVVS 40cc oil
Hi, today in Romania the weather was good,20 degrees.In these conditions I and my friend Jimmy managed to running in my MVVS40 CC. We made this operation like in the manual. After 20 minutes I obtained [b]7200[/b] rpm with a propeller Graupner G Sonic 20x10. During the running in I opened ''high'' with 1/2 spin. I used muffler 3271. After this period all the starts were at first or second spin of the propeller. The gas I used was OMW 95 Octane and the oil was Mobile 1 2T Racing full synthetic. For a start,I think it was a good result. MVVS are the best, they produce excellent engines. Finally thanks for your help Mr. Pe Reivers. Best regards, Mugurel
Posted on: 10/22/2009 1:10 PM by Author "JIMMYMUGUREL"
in the forum "MVVS Support"
http://www.rcuniverse.com/forum/fb.asp?m=9193603
RE: MVVS 40cc oil
Hello Mr. Pe Reivers, In the end though I found Mobil1 Racing. The problem is that it has another design, different color (red) and another smell. I put a picture. The rest is the same that is JASO / FC. You know this new package? It is the same oil? Thanks for your help. Best regards, Mugurel
Posted on: 10/5/2009 1:26 PM by Author "JIMMYMUGUREL"
in the forum "MVVS Support"
http://www.rcuniverse.com/forum/fb.asp?m=9148434
RE: MVVS 40cc oil
Thanks for the reply, I use Motul 800 is the best way for me even if it is more expensive than Mobil 1. Regards, Mugurel
Posted on: 9/28/2009 9:04 AM by Author "JIMMYMUGUREL"
in the forum "MVVS Support"
http://www.rcuniverse.com/forum/fb.asp?m=9129491
MVVS 40cc oil
Hi Mr. Pe Reivers Because the Mobile 1 2T Racing isn't being produced anymore,can I use Motul 800 without any problems? Is it of any importance if I Motul 800 RR or OR? Which do you recommend? These types of oil are easy to be found in my town. In Romania I can find Putoline oil but I have to order it and wait a couple of days. I've seen about all you can see on this forum about Motul 800, I need a last confirmation, because the engine is new and does not want to lose my warranty for it. Thanks. Regards, Mugurel
Posted on: 9/28/2009 5:19 AM by Author "JIMMYMUGUREL"
in the forum "MVVS Support"
http://www.rcuniverse.com/forum/fb.asp?m=9129234
RE: P-38 Ziroli designed, built and aluminum plated by Metal-morphous
Hi Ron Here you can see the front wheel's angle and lenght ( sec. 15 to 25 ) In almost full compresion, under braking.It's one of my YouTube posts, between others like P-47 or Zero. http://www.youtube.com/watch?v=c16I8X8X5aA Nice to see fine progress on your project.I can imagine how you experienced the P-51 flight. Your's JIMMY
Posted on: 9/26/2009 12:30 PM by Author "JIMMYMUGUREL"
in the forum "RC Warbirds and Warplanes"
http://www.rcuniverse.com/forum/fb.asp?m=9125407
RE: Best scale photo!
[quote]ORIGINAL: abufletcher Jimmy, here's a pilot for your bird! [/quote] My Bf-109 G have one ..... so I do another try, demonstrating my photographer skils Your's JIMMY
Posted on: 6/10/2009 6:24 AM by Author "JIMMYMUGUREL"
in the forum "RC Scale Aircraft"
http://www.rcuniverse.com/forum/fb.asp?m=8840548
RE: Best scale photo!
I'm not a good photographer .... maybe these? JIMMY
Posted on: 5/18/2009 2:00 AM by Author "JIMMYMUGUREL"
in the forum "RC Scale Aircraft"
http://www.rcuniverse.com/forum/fb.asp?m=8778039
RE: Best scale photo!
My 1:6 Papagei Dora JIMMY
Posted on: 5/17/2009 8:29 AM by Author "JIMMYMUGUREL"
in the forum "RC Scale Aircraft"
http://www.rcuniverse.com/forum/fb.asp?m=8775678
RE: Walbro, shame on you!
Hi, In 2006 I bought a MVVS 26cc gas and I had the same problems with Walbro carburetor. Until after I bought a carburetor from a tool Husqvarna with 25cc engine because there was nothing could repair the original, and everything came in normal. Regards Mugurel Jimmy and Mugurel
Posted on: 5/11/2009 5:17 AM by Author "JIMMYMUGUREL"
in the forum "Gas Engines"
http://www.rcuniverse.com/forum/fb.asp?m=8758770
RE: Freedom 9S vs gas engine/glow engine
I found the problem , Spectra 35Mhz module is defective. I sent to be changed, is guaranteed. Thanks for your support.
Posted on: 4/22/2009 2:11 AM by Author "JIMMYMUGUREL"
in the forum "Hitec/MultiPlex Radios- Ask Hitec Customer Service"
http://www.rcuniverse.com/forum/fb.asp?m=8704232
RE: Freedom 9S vs gas engine/glow engine
Hello I have a queries:when Rx start the first time in days and after a few hours just happens same , Led on but servos do not work. After reboot 2-3 times everything is working OK. First, start Tx then Rx. It is a problem. Rx is new, I did not put on in any model. Regards, Mugurel
Posted on: 4/18/2009 4:34 AM by Author "JIMMYMUGUREL"
in the forum "Hitec/MultiPlex Radios- Ask Hitec Customer Service"
http://www.rcuniverse.com/forum/fb.asp?m=8691962
RE: 45cc chainsaw China
Hello, Today I did test the engine -static thrust: 10.5 kg (23.2 lbs) , G-sonic graupner 22x8 ,rpm=? . I think it's OK! Regards, Mugurel
Posted on: 4/2/2009 4:02 PM by Author "JIMMYMUGUREL"
in the forum "Engine Conversions"
http://www.rcuniverse.com/forum/fb.asp?m=8642373
RE: BH MODELS (CAP 232-80)
Hi James, Thanks so much for your help. I saw the device but I do not have something, I do the template of plywood and mounted the engine in various locations will match up. Because the engine is hard you had trouble center, had to put some weight in the tail?To Rx power you used something like PowerBox or servo directly mounted receiver. What hinges did you use, the original flexible? On your engine, you tried setting a little more rich? The engine is new? If not, we saw that a certain number of hours the engines 4stroke be corrected in the valve seats with pasta sander. It could be this one case. You can try using a system that Yamada engines with engine pressure through a nozzle directly into the fuel tank and a one-way valve pump without Perry. Good luck, Mugurel
Posted on: 3/2/2009 3:42 AM by Author "JIMMYMUGUREL"
in the forum "ARF or RTF"
http://www.rcuniverse.com/forum/fb.asp?m=8530559
RE: BH MODELS (CAP 232-80)
Hi James, I bought one a few days. I have to put an engine of 45cc Chainsaw. I have two questions. How did the engine located? Mouting templates for OS MAX are right axle with 11mm (0.4 inches). You mounted the engine to fit in the cowl or used for mounting the axis for OS MAX. You have reinforced the wall of fire, it seems a bit fragile? What weight is your engine? Mine are completely 1865g (4.11 lbs). Thanks for your help. Best regards, Mugurel Jimmy and Mugurel
Posted on: 2/27/2009 7:16 AM by Author "JIMMYMUGUREL"
in the forum "ARF or RTF"
http://www.rcuniverse.com/forum/fb.asp?m=8523680
Tower Pro Mg996
Hi, how is the servo TowerPro MG996, are accurate, hold time ,can be mounted without risk on a plane with 2m wing span with gas engine 45cc? I saw some MG995 mounted on planes and have no problems but did not seem accurate. MG996 has something extra? Thanks! Best regards Mugurel Jimmy and Mugurel
Posted on: 2/21/2009 2:53 AM by Author "JIMMYMUGUREL"
in the forum "Giant Scale Aircraft - General"
http://www.rcuniverse.com/forum/fb.asp?m=8500712
RE: Stihl 65cc 4-mix on 30% Edge
[quote]ORIGINAL: tripp3d Here are a few pics of my KMP 30% Edge on maiden flight today... Stihl 65cc four stroke 50:1 mix 22x10 prop (5) 200 oz digital hi torque (Tower Pro) servos [/quote] Hi, What servo did you use, MG995 and MG945? And they went wrong, you had no problem with them? And tempted me because they are cheap. Very interesting conversion, I do hope I get a big engine 50-60cc 4 stroke. Good luck! Mugurel
Posted on: 2/9/2009 2:15 AM by Author "JIMMYMUGUREL"
in the forum "Engine Conversions"
http://www.rcuniverse.com/forum/fb.asp?m=8455706
RE: 45cc chainsaw China
Hello, I am glad that my thread inspired you.I used an ignition and Prop mount from a SPE 26 CC.I bought it from www.Himodel.com at spare parts for this engine. I am waiting for pictures. Good luck, Mugurel
Posted on: 2/7/2009 12:00 PM by Author "JIMMYMUGUREL"
in the forum "Engine Conversions"
http://www.rcuniverse.com/forum/fb.asp?m=8448813
RE: Project BF-109 E 4 1/5
[quote]ORIGINAL: fokke ... Jimmy ,the projekt is frozen for now ,I have order to build and moulding model Zlin 50 in 1/4 scale and I don't have a time [:@] [/quote] Hello Rumen Did you started a new topic with the Zlin? Have a link please? Jimmy
Posted on: 2/3/2009 3:42 PM by Author "JIMMYMUGUREL"
in the forum "RC Warbirds and Warplanes"
http://www.rcuniverse.com/forum/fb.asp?m=8434435
RE: 45cc chainsaw China
Hi, I finally managed to make me a muffler, light and compact, 100g- 0,22lbs, so the final weight of the engine is 1800g- 3,97lbs. I play the muffler is made from air filter housing from an old Mazda 626. Volume is nearly 2 times the capacity of cylindrical engine so it is OK. May need to adjust screws, bushings to do the 2 screws to mount the muffler. Also need to make an intermediate piece between the muffler and engine. Best regards, Mugurel
Posted on: 2/2/2009 4:29 AM by Author "JIMMYMUGUREL"
in the forum "Engine Conversions"
http://www.rcuniverse.com/forum/fb.asp?m=8429007
RE: FW 190 A8 (1:7)
Hello �ki Your FW looks super. Hardly wait to see the paint job started. On my models I use automotive paint ( thiner-based ). The foil you use ,need to be protected against thinner-based paints? If I ever find ( maibe in the summer will make a trip to Budapest[:D] ) this foil. I'm curious if works with such type of paints. Following your project with interest. JIMMY
Posted on: 1/30/2009 3:41 PM by Author "JIMMYMUGUREL"
in the forum "RC Warbirds and Warplanes"
http://www.rcuniverse.com/forum/fb.asp?m=8420077
RE: FW 190 A8 (1:7)
Hello �ki What kind of paint will you use for the paintjob? The foil need to be protected against thinner-based paints? Where can I buy that allu-based foil? Thank's Jimmy
Posted on: 1/29/2009 12:41 PM by Author "JIMMYMUGUREL"
in the forum "RC Warbirds and Warplanes"
http://www.rcuniverse.com/forum/fb.asp?m=8415657
RE: 45cc chainsaw China
Hi, Crankcase is ready to cut. While the engine was new, original ignition and crankcase gaskets are damaged. In other engine seems OK. My friend Jimmy put ignition from 45cc engine and started. Continue after cutting. Best regards, Mugurel
Posted on: 1/28/2009 12:41 PM by Author "JIMMYMUGUREL"
in the forum "Engine Conversions"
http://www.rcuniverse.com/forum/fb.asp?m=8411730
RE: 45cc chainsaw China
Hello, I found a new Chainsaw of the same model of 45cc converted. Everything was just on the outside, the same labels, the carburetor, close the cylinder, piston differ in shape. Surprise is 50cc engine. 45 bore and stroke 31. Put some pictures of the engine block. I got the engine without plastic carcasses. And I have to work again![:@] Best regards Mugurel
Posted on: 1/27/2009 2:16 PM by Author "JIMMYMUGUREL"
in the forum "Engine Conversions"
http://www.rcuniverse.com/forum/fb.asp?m=8407928
RE: 45cc chainsaw China
Hi, To the label was written only Husqvarna, nothing else.To the chain was not written Husqvarna. Cylinder is the same as in ZG45 and those of almost all RC 45cc engines manufactured in China, Bore = 43mm, Stroke = 31mm (same ZG45),has 2 rings on the piston. At Chainsaw crankcase body made with a bath oil for chain.These parts were cut. At Husqvarna is not so. The engine is separated from the rest being fixed with four screws. The engine is almost identical FTL45 from Hobbycity Best regards Mugurel
Posted on: 1/21/2009 1:32 AM by Author "JIMMYMUGUREL"
in the forum "Engine Conversions"
http://www.rcuniverse.com/forum/fb.asp?m=8382818
RE: 45cc chainsaw China
Hi. Not link for these chainsaws ,are sold on the street ,with Husqvarna labels on them, for 80-100$. You can not to cut more than 3 trees with them, but the engines are OK. Tanks Jester241
Posted on: 1/19/2009 11:24 PM by Author "JIMMYMUGUREL"
in the forum "Engine Conversions"
http://www.rcuniverse.com/forum/fb.asp?m=8378496
RE: 45cc chainsaw China
I want to put on a CAP 232 180 BLACK HORSE. http://www.youtube.com/watch?v=-pp6uvgHiCs Mugurel
Posted on: 1/19/2009 2:48 PM by Author "JIMMYMUGUREL"
in the forum "Engine Conversions"
http://www.rcuniverse.com/forum/fb.asp?m=8376397
45cc chainsaw China
Hello, I managed a new conversion, a 45cc Chainsaw made in China without a name. Results: 7500rpm without silencer and 6800rpm with original silencer, prop 22x8 g-sonic graupner Best regards Mugurel Jimmy and Mugurel
Posted on: 1/19/2009 2:20 PM by Author "JIMMYMUGUREL"
in the forum "Engine Conversions"
http://www.rcuniverse.com/forum/fb.asp?m=8376310
RE: FW 190 A8 (1:7)
Hello �ki Nice progress on your model.The profile of your FW is looking OK. Fine job!.[sm=thumbs_up.gif] Jimmy
Posted on: 1/17/2009 3:01 PM by Author "JIMMYMUGUREL"
in the forum "RC Warbirds and Warplanes"
http://www.rcuniverse.com/forum/fb.asp?m=8369014
RE: Project BF-109 E 4 1/5
Servusztok! Greetings from Romania! I-m another G-6 Messerschmitt Fan[:D] Fine job RUMEN! Still following your fine project ( s ). JIMMY
Posted on: 1/10/2009 6:56 PM by Author "JIMMYMUGUREL"
in the forum "RC Warbirds and Warplanes"
http://www.rcuniverse.com/forum/fb.asp?m=8343108
| 
