|
RE: Spitfire Brotherhood (All Spitfires Welcome)
Sign me up too. My Spitfire just arrived yesterday and boy is she a beauty! Joe
Posted on: 3/13/2012 11:38 AM by Author "JL636"
in the forum "RC Warbirds and Warplanes"
http://www.rcuniverse.com/forum/fb.asp?m=10998626
RE: Seagull's Percival Mew Gull
Will be using a RCGF 26 on my Gull also. Could you indicate the size of standoffs used and any other problems you might have encountered? Thanks Joe
Posted on: 3/6/2012 2:49 AM by Author "JL636"
in the forum "ARF or RTF"
http://www.rcuniverse.com/forum/fb.asp?m=10988365
RE: Share your new plane for the 2012 season!
Percival Mew Gull with a 26cc Evo. Joe
Posted on: 1/30/2012 11:09 PM by Author "JL636"
in the forum "ARF or RTF"
http://www.rcuniverse.com/forum/fb.asp?m=10936342
Replacement muffler for a Evolution 26 gasser
I need to know if there is a muffler out there that will fit myEvo 26. $85.00 from Horizon is just a bit to steep. Would prefer a wrap around as the engine is going in a Percival Mew Gull.
Posted on: 11/5/2011 12:38 AM by Author "JL636"
in the forum "Gas Engines"
http://www.rcuniverse.com/forum/fb.asp?m=10797667
RE: Seagull Percival Mew Gull 120 ARF
Just picked up a Evolution 26 gasser figured it would be alot easier on my wallet than my saito 150. Waiting for the first snow flake to hit which would signal the winter building season. The "Gull" build will be followed by a Sig profile Ultimate and a Sig Hog bipe. That should take care of the winter months pretty well. Well just would like to know if anyone else is going the gasser route. Joe
Posted on: 10/30/2011 11:51 AM by Author "JL636"
in the forum "ARF or RTF"
http://www.rcuniverse.com/forum/fb.asp?m=10789456
hatch magnets
Does anyone know what supplier would have magnets that could be used to hold hatches down on airplanes. getting sick of using screws that back out on a pretty regular basis.
Posted on: 8/11/2011 6:33 AM by Author "JL636"
in the forum "ARF or RTF"
http://www.rcuniverse.com/forum/fb.asp?m=10665573
RE: Don Muddiman Flying Machine
May have missed it, but what are we looking at for price?
Posted on: 7/27/2011 6:38 AM by Author "JL636"
in the forum "The Clubhouse"
http://www.rcuniverse.com/forum/fb.asp?m=10641107
ST2300
Would the conversion from glow to gas be worth it? And what would be the cost and where would a person send it to have it converted? Thanks
Posted on: 7/24/2011 7:11 PM by Author "JL636"
in the forum "Gas Engines"
http://www.rcuniverse.com/forum/fb.asp?m=10637167
RE: Don Muddiman Flying Machine
Kind of jumping in here mid-steam, but have they determined a price on the FM? The only reason I'm asking is that I am a vet on disability and would like to know if it is even fesible for me to start saving for one being that is the only way I can hopefully get one. I'll keep my fingers crossed that it is within reason as it seems that the price on most of the nice ones out there are way out of my reach. Thanks for any info that you can provide. Joe
Posted on: 7/16/2011 12:12 PM by Author "JL636"
in the forum "The Clubhouse"
http://www.rcuniverse.com/forum/fb.asp?m=10623986
RE: Witch plane is better?
I fly a MOJO 60 with a OS 91 four stroke. It will do everything and then some. Whether its down on the deck or up a few hundred, its an absolute blast. Give it a try, you won't be sorry. Joe. Bay Flyers, Sturgeon Bay Wi.
Posted on: 7/4/2011 10:32 AM by Author "JL636"
in the forum "3D Flying!"
http://www.rcuniverse.com/forum/fb.asp?m=10605535
RE: I hate people
I think we should have a friday evening show titled " Executing thieves".
Posted on: 6/23/2011 8:11 PM by Author "JL636"
in the forum "Off Topic Forum - Cars, Trucks, Buggies and more"
http://www.rcuniverse.com/forum/fb.asp?m=10589437
RE: Dual rate switch will not switch JR7202
Did a "reset" and got the aileron dual rate to work. Now the problem of getting the switch to go between the "0" and "1" position has moved to the elevator! Has to be something I'm doing wrong. has to be. Joe
Posted on: 6/4/2011 4:37 AM by Author "JL636"
in the forum "JR Radio & Spektrum Radios"
http://www.rcuniverse.com/forum/fb.asp?m=10556128
Dual rate switch will not switch JR7202
To make a long story short, on my 7202 when I want to switch from "0" to "1" nothing happens. So from going to low rates to high is a moot point. Anyone else ever have this happen. I'm hoping this does not mean a shipment to Horizon. Help!!!!!!!!!!!!!!!! Joe
Posted on: 6/2/2011 4:27 PM by Author "JL636"
in the forum "JR Radio & Spektrum Radios"
http://www.rcuniverse.com/forum/fb.asp?m=10553812
RE: U Can Do & OS 108FSR
To Sam-E Yes, the plane is already purchased and on its way. LHS also informed me that he has a Revolver 70 coming also, wonder what the wifey would say?
Posted on: 5/24/2011 9:34 AM by Author "JL636"
in the forum "3D Flying!"
http://www.rcuniverse.com/forum/fb.asp?m=10538075
RE: U Can Do & OS 108FSR
Then I guess it's a toss up between a OS 91FX or a 91 four stroke. Thanks for the replies.
Posted on: 5/24/2011 3:07 AM by Author "JL636"
in the forum "3D Flying!"
http://www.rcuniverse.com/forum/fb.asp?m=10537598
U Can Do & OS 108FSR
Has anyone ever used the above engine on the UCD 60? And if so, what kind of results did you get? Thanks Joe
Posted on: 5/23/2011 3:19 PM by Author "JL636"
in the forum "3D Flying!"
http://www.rcuniverse.com/forum/fb.asp?m=10536725
RE: Is this hobby Like an addiction to you ??
I am disabled and a vet. If it were not for the hobby and my flying friends/ buddies, steve, bill and Chip I would have lost what few brain cells I have long ago.
Posted on: 5/14/2011 2:01 PM by Author "JL636"
in the forum "3D Flying!"
http://www.rcuniverse.com/forum/fb.asp?m=10519803
RE: Not for sale
Finally came across some plans for sale on Ebay. Finding them really made my day! Does anyone have a list of "sizes" I'll need? Would help alot when I go to my friendly LHS to buy balsa and light ply. Joe
Posted on: 5/7/2011 12:25 PM by Author "JL636"
in the forum "Profile and Fun Flying Planes"
http://www.rcuniverse.com/forum/fb.asp?m=10506735
RE: Battery up front of a gasser
Battery for the RX. The RX itself will be located in the fuse 20" back from the battery. I will connect the two via a extension where in lies the question..will there be a problem with interference. The battery will be located below the engine box, then a extension will be run 20" back to the RX. Interference or not? The battery for the CDI is located about 12" back. Hope this description helps, I'm about ready to dump gassers! Help!!!!!!!! Joe
Posted on: 4/18/2011 10:15 AM by Author "JL636"
in the forum "Gas Engines"
http://www.rcuniverse.com/forum/fb.asp?m=10469871
RX-extension-battery= Problem ?
I will be running a Brillelli 46( gas engine) on a 80" Extra using a JR 7202 for guidance. Balancing process-I always balance my aircraft by first putting them on the stand up side down, placing the battery pack on the fuse and slide it either forward or aft to determine the best balance point. As luck would have it,the battery ended up on the firewall. The RX will be about 20+" back and in order to connect the two, I will have to run about a 18" extension. If I mount the battery under the engine, leave the RX (790) at about 20" back in the fuse, will the extension cause a problem/interference? Joe
Posted on: 4/18/2011 7:40 AM by Author "JL636"
in the forum "JR Radio & Spektrum Radios"
http://www.rcuniverse.com/forum/fb.asp?m=10469574
Battery up front of a gasser
I have a 80" Extra I'm going to be running a 46 Brillelli on. I have the CDI mounted on the firewall with the switch mounted on the left side of the fuse and have the battery (CDI) located inside about 12" back. Now for the main question. I normally take my main battery and put a piece of two sided tape on it for balancing purposes and do not install it inside. The reason I do this is that when I put the plane on the balancer, I can move the battery forward or aft to see where I should put in order to balance the airplane. The Extra proved to be a very tail heavy creature. I started at about mid wing and kept moving the battery forward. When all was said and done, the plane balanced perfectly with it on the firewall. Being as the RX is about 20" back, I'll have to run an extension from the RX to the battery. Will this cause interference of any kind if I mount the battery below the engine box on the firewall?
Posted on: 4/17/2011 7:33 PM by Author "JL636"
in the forum "Gas Engines"
http://www.rcuniverse.com/forum/fb.asp?m=10468815
My Represenative replies!!!!!!!!!!!!!!!!!!!!
Well I guess it does pay to email them. It took a little while, but he said he is aware of the bill and is against anything that would put a burden on or restrict model aviation. He wanted my email address so he can email me with any information on the bill. We will see. Joe (Wisconsin's 8th Congressinal District) Joe Little President, Bay Flyers Sturgeon Bay, Wis.
Posted on: 4/6/2011 8:40 PM by Author "JL636"
in the forum "AMA Discussions"
http://www.rcuniverse.com/forum/fb.asp?m=10448081
RE: Jeff Troy's Tamecat trainer, World models..
These posts have helped me to decide I'm going to put my unstarted kit up for sale. Just doesn't seem like I would be into it enough. Thanks guys. Joe
Posted on: 4/5/2011 12:45 PM by Author "JL636"
in the forum "ARF or RTF"
http://www.rcuniverse.com/forum/fb.asp?m=10444884
RE: how to become a cd
Where does a person get this book? Joe
Posted on: 3/4/2011 12:52 PM by Author "JL636"
in the forum "AMA Discussions"
http://www.rcuniverse.com/forum/fb.asp?m=10378937
RE: Important Info regarding FAA regs
# 174 from WISCONSIN. Come on fellas n gals, lets get the number from the Badger State up a bunch! Joe Little President, Bay Flyers Sturgeon Bay, Wi.
Posted on: 2/24/2011 6:07 PM by Author "JL636"
in the forum "AMA Discussions"
http://www.rcuniverse.com/forum/fb.asp?m=10361574
RE: RCU Site Problems??
Ditto for me also, all forums seem to work great except Buy/sell, makes it impossible to check on transactions. Thanks, Joe
Posted on: 2/10/2011 1:08 PM by Author "JL636"
in the forum "The Clubhouse"
http://www.rcuniverse.com/forum/fb.asp?m=10326526
RE: Why the lack of communication from RCU?
In refernce to the "certain forums being down more often than not" , I can't access the items in the sell/buy forum AGAIN! All other sections are working ok, I even tried to access buy/sell from forums I have up without luck. When will this end!
Posted on: 2/9/2011 8:07 PM by Author "JL636"
in the forum "The Clubhouse"
http://www.rcuniverse.com/forum/fb.asp?m=10324944
RE: Not for sale
What is the average cost of the kits and I'd be interested if somebody has one they cracked up and would rather pitch it than fix it. Joe (JL636)
Posted on: 2/9/2011 11:59 AM by Author "JL636"
in the forum "Profile and Fun Flying Planes"
http://www.rcuniverse.com/forum/fb.asp?m=10323719
RE: BUY & SELL NOT WORKING
Monday , 6:45 AM Buy & Sell up and running. Still a few glitches but it is there. Joe
Posted on: 12/6/2010 3:42 AM by Author "JL636"
in the forum "The Clubhouse"
http://www.rcuniverse.com/forum/fb.asp?m=10179572
RE: Bridi Killer 60 plans (tail section)
Big "THANKS" to everybody who replied. Joe
Posted on: 9/14/2010 8:40 PM by Author "JL636"
in the forum "Kit Building"
http://www.rcuniverse.com/forum/fb.asp?m=10002603
| 
