|
RE: Throttle ratchet?
the problem will begins sometimes when you have an airplane that requirs 2-3 clicks to land...sometimes when you have heli version you will not be happy not knowing how many clicks you have in that moment...i fly helis too and i have both 10CG, for helis and airplanes...and in the end i prefer Airplane version, much more easy to land and make my 50CC hover.
Posted on: 11/19/2009 1:36 PM by Author "JOHNS3D"
in the forum "3D Flying!"
http://www.rcuniverse.com/forum/fb.asp?m=9265336
RE: 100cc Extra 300 ARF QB
thanks Rocco, i love my 50cc Extra 300 so i know the 100cc will be amazing too. I will put 2 HS7955 on each half just to be safe. Regards.
Posted on: 11/19/2009 12:53 PM by Author "JOHNS3D"
in the forum "Aero-Works Support"
http://www.rcuniverse.com/forum/fb.asp?m=9265263
RE: 100cc Extra 300 ARF QB
Rocco/Mark do you think a hitec 7950 will be enough for using one per half wing?. I want to start to save money and buy parts for the bigger brother of my 50cc Extra. Hopefully i will get it in a few months. I was thinking 7950 on the ailerons(one per half wing), 7955 on elevators and one 7950 on rudder, powered by a DLE111. Not sure about the power of the system but want to start with the first parts that i mentioned here. Regards
Posted on: 11/19/2009 3:59 AM by Author "JOHNS3D"
in the forum "Aero-Works Support"
http://www.rcuniverse.com/forum/fb.asp?m=9264551
RE: standoffs DLE 55 HELP!
3da call Jody at valleyviewrc.com he can help you with that.... but is weird a friend of mine has a DLE on the extra and no problems.
Posted on: 11/15/2009 8:15 PM by Author "JOHNS3D"
in the forum "Aero-Works Support"
http://www.rcuniverse.com/forum/fb.asp?m=9256156
RE: Acuu-Cycle Elite
i have that charger too...great btw, it can also charge my li-ion packs.
Posted on: 11/15/2009 7:56 PM by Author "JOHNS3D"
in the forum "Batteries & Chargers"
http://www.rcuniverse.com/forum/fb.asp?m=9256098
RE: 55 cc engine
this project will be great!!!
Posted on: 11/13/2009 8:58 PM by Author "JOHNS3D"
in the forum "Gas Engines"
http://www.rcuniverse.com/forum/fb.asp?m=9252113
RE: New Edge 540's 50cc vs 100cc?
the 100CC will hold without any problem....if the money is not a problem get the biggest one. Or the Extra 300.
Posted on: 11/13/2009 8:55 PM by Author "JOHNS3D"
in the forum "Aero-Works Support"
http://www.rcuniverse.com/forum/fb.asp?m=9252104
RE: what to get?
size? how much money do you have?..
Posted on: 11/13/2009 11:05 AM by Author "JOHNS3D"
in the forum "3D Flying!"
http://www.rcuniverse.com/forum/fb.asp?m=9250840
RE: AeroWorks Edge 540T 46-60?
ups good question...didnt tach with this propeller, i will do it next week, but i really started to enjoy this airplane more with this propeller cause my goal is make my finger bleed to practice harriers, hovers, rolling harrier, etc.
Posted on: 11/2/2009 3:57 PM by Author "JOHNS3D"
in the forum "3D Flying!"
http://www.rcuniverse.com/forum/fb.asp?m=9222998
RE: Introducing The New 50cc Extra 300 ARF-QB!
spinner installed, i love it, increible fast shipping from Azure and the cut of the spinner to fit my Xoar is really impressive. I just drilled the holes on the backplate with my jib, did some turns with the cone and the back plate to make it a little rough and did like 4 tanks and no problem...never moved.
Posted on: 11/1/2009 2:52 PM by Author "JOHNS3D"
in the forum "Aero-Works Support"
http://www.rcuniverse.com/forum/fb.asp?m=9220407
RE: New DLE 55 start trouble
thats great!!!! right now just fly like that and check on the air for some different noise so you can fine tune it.
Posted on: 11/1/2009 1:42 PM by Author "JOHNS3D"
in the forum "Gas Engines"
http://www.rcuniverse.com/forum/fb.asp?m=9220271
RE: Which brand of plane makes the best 3d er's
check my post...before and you will see which brands are the best for electric, glow and gas.
Posted on: 11/1/2009 1:41 PM by Author "JOHNS3D"
in the forum "3D Flying!"
http://www.rcuniverse.com/forum/fb.asp?m=9220263
RE: AeroWorks Edge 540T 46-60?
well yesterday was a good day for me, tested finally the 14x6 propellers on my Edge with the .81 alpha... wow this propeller makes the bird hover nice!!! and for long time, of course it doesnt go up after, just hit the elevator and go horizontal to leave hover, but really nice...finally i can practice more hovers, time do it from a few feet on the ground :)
Posted on: 11/1/2009 1:38 PM by Author "JOHNS3D"
in the forum "3D Flying!"
http://www.rcuniverse.com/forum/fb.asp?m=9220256
RE: DLE-30 - Post your prop data here
guys which one should be the best for 3D.
Posted on: 10/31/2009 11:20 PM by Author "JOHNS3D"
in the forum "Gas Engines"
http://www.rcuniverse.com/forum/fb.asp?m=9218944
RE: DA-50R vs DLE-55
a friend crash 3 times on his yak due a dead stick on his DA, he sent everytime the engine to inspect and service....then the same dead stick, same happen, inverted and hover. He was so tired to buy airframes that he just installed a DLE55, of course he never told us cause he was always saying that DL was a cheap engine. At least he understood that blink doesnt give more power. He really know how to fly his 150cc Extra and the yak, also engine tune...but maybe was bad luck. Right now no more dead sticks.
Posted on: 10/31/2009 1:40 PM by Author "JOHNS3D"
in the forum "Gas Engines"
http://www.rcuniverse.com/forum/fb.asp?m=9217769
RE: New DLE 55 start trouble
put the needle on the TOM 1.5 advice...then peak the high, check the low for good transitions... you will hear on the air if is poping or not.
Posted on: 10/31/2009 1:04 AM by Author "JOHNS3D"
in the forum "Gas Engines"
http://www.rcuniverse.com/forum/fb.asp?m=9216853
RE: Looking for ideas to keep oil off my planes
tubes just helps a bit.... no much, thats why i love my gasser, there no oil or dirty stuff after a day of fun.
Posted on: 10/30/2009 11:30 PM by Author "JOHNS3D"
in the forum "Beginners"
http://www.rcuniverse.com/forum/fb.asp?m=9216690
RE: Introducing The New 50cc Extra 300 ARF-QB!
the carb mode. Well is sometimes difficult to get the screwdriver in place when you are tuning the carg with the engine running, so this helps to keep it in place, safe and no cowling removes again.
Posted on: 10/30/2009 11:01 PM by Author "JOHNS3D"
in the forum "Aero-Works Support"
http://www.rcuniverse.com/forum/fb.asp?m=9216632
RE: Introducing The New 50cc Extra 300 ARF-QB!
here is the new mods for my Extra...Graphtech tailwheel, Azure CF spinner and did some mod to have access to the carb needle more easy.
Posted on: 10/30/2009 10:46 PM by Author "JOHNS3D"
in the forum "Aero-Works Support"
http://www.rcuniverse.com/forum/fb.asp?m=9216605
RE: Set up Help
my friend one question... you have 2 servos per elevators right? did you check if both has exactly the same throw?. Check with a gauge to see if both has exactly the same degrees when you move it. Hope that CG helps you on the issue. good luck.
Posted on: 10/30/2009 10:26 PM by Author "JOHNS3D"
in the forum "Giant Scale Aircraft - 3D & Aerobatic"
http://www.rcuniverse.com/forum/fb.asp?m=9216562
RE: Which brand of plane makes the best 3d er's
ELECTRIC FRAMES: presicion aerobatics 3dhobbyshop(they have also gassers) Gassers and glow Extreme Fligth RC Aeroworks Pilot RC
Posted on: 10/30/2009 1:52 PM by Author "JOHNS3D"
in the forum "3D Flying!"
http://www.rcuniverse.com/forum/fb.asp?m=9215279
RE: New DLE 55 start trouble
pabro, hope we can help. Just tell us a few info: 1. Are you using stock plug? IF YES change it to 5812 ngk CM-6 2. What propeller are you using? 3. Sometimes the needles CANT be in the right place...sometimes yes so. CLOSE both needle and start to open again.
Posted on: 10/30/2009 12:32 PM by Author "JOHNS3D"
in the forum "Gas Engines"
http://www.rcuniverse.com/forum/fb.asp?m=9215091
RE: 55 cc engine
thats great!!! good luck and let us see more pics.
Posted on: 10/30/2009 12:33 AM by Author "JOHNS3D"
in the forum "Gas Engines"
http://www.rcuniverse.com/forum/fb.asp?m=9214201
RE: prop rpm question??
i would go with 14x4W
Posted on: 10/30/2009 12:19 AM by Author "JOHNS3D"
in the forum "3D Flying!"
http://www.rcuniverse.com/forum/fb.asp?m=9214176
RE: Xoar
on gas is almost the same thing...i saw like 500 rpms less with my laminated Xoar 22x8 propeller.
Posted on: 10/30/2009 12:18 AM by Author "JOHNS3D"
in the forum "3D Flying!"
http://www.rcuniverse.com/forum/fb.asp?m=9214173
RE: Set up Help
meek, check the CG again then...is really simple, as Jake told you go inverted...if you need to put "down" you are fine..if the airplane goes up is tailheavy. I did have one airplane tailheavy one time and believe me it was a scary on landings.
Posted on: 10/29/2009 10:59 PM by Author "JOHNS3D"
in the forum "Giant Scale Aircraft - 3D & Aerobatic"
http://www.rcuniverse.com/forum/fb.asp?m=9213962
RE: Set up Help
mmm i checking the manual of my 30% Extra and elevator has 12 degres at low rate and im using 30% expo there. One question let me know whats your subtrimes in that channels. Do you have your arm at 90 degress? at center stick When your nose(airplane nose) is going up at low speed means that you are really tail heavy, i should check also that point.
Posted on: 10/29/2009 6:55 PM by Author "JOHNS3D"
in the forum "Giant Scale Aircraft - 3D & Aerobatic"
http://www.rcuniverse.com/forum/fb.asp?m=9213281
RE: Set up Help
what radio are you using?
Posted on: 10/29/2009 6:41 PM by Author "JOHNS3D"
in the forum "Giant Scale Aircraft - 3D & Aerobatic"
http://www.rcuniverse.com/forum/fb.asp?m=9213241
RE: Air vs. Heli radios
correct..., the only problem that i see in my 20 years of flying is(personally) when you have a heli radio and want to fly a big gasser, sometimes on langinds its a little bad when you dont have the ratchet throttle stick.... some people know how many "clicks" needs to land the airplane or just to start the engine, something than heli radios you will never know where is the position of the stick. Then on AIR side..when you fly helis...the ratchet stick makes a little difficult if you want to be at exactly the same altittude on hovers... case one click can make a difference, without it is more easy. I was using a 7C heli radio for my 500ESP and 450, when i got my gasser it was a nightmare.......then order a 10CG AIR and hovers etc was a little weird lol. But im a little on the perfection side...so its just a pesonal opinion.
Posted on: 10/29/2009 4:57 PM by Author "JOHNS3D"
in the forum "Beginners"
http://www.rcuniverse.com/forum/fb.asp?m=9212933
RE: DA-50R vs DLE-55
dle is new version and has more power than DL50. get it from www.valleyviewrc.com or contact jedyjodi here on the forum. The best costumer service on the planet.
Posted on: 10/29/2009 4:09 PM by Author "JOHNS3D"
in the forum "Gas Engines"
http://www.rcuniverse.com/forum/fb.asp?m=9212799
| 
