|
RE: Walt Moucha Plans and Kits
I have the Marquart and it handles very well good plans. His short kits are good
Posted on: 7/30/2012 11:42 AM by Author "Jacque"
in the forum "Scratch Building, Aircraft Design, 3D/CAD"
http://www.rcuniverse.com/forum/fb.asp?m=11174687
RE: Gas Engine for Bellanca Aircruiser
A Zenoah 38 would be a good eng. if you need the weight up front. One of the most reliable on the market
Posted on: 4/22/2012 12:42 PM by Author "Jacque"
in the forum "Scratch Building, Aircraft Design, 3D/CAD"
http://www.rcuniverse.com/forum/fb.asp?m=11052407
RE: Balsa USA 1/4 scale CUB Motor Size
A G 26 is a fine eng. for that plane
Posted on: 4/7/2012 8:25 AM by Author "Jacque"
in the forum "Kit Building"
http://www.rcuniverse.com/forum/fb.asp?m=11031830
RE: Help!
Try Mick Reeves And you might try Glenn Torrence
Posted on: 2/28/2012 7:03 PM by Author "Jacque"
in the forum "RC Scale Aircraft"
http://www.rcuniverse.com/forum/fb.asp?m=10980777
RE: TF P51 and Brushed Alum look?
Some of the guys in our club have used aluminum Duct tape from home depot
Posted on: 2/27/2012 11:53 AM by Author "Jacque"
in the forum "RC Scale Aircraft"
http://www.rcuniverse.com/forum/fb.asp?m=10978527
RE: Where to buy cheap braided rigging cables
I have gotten 1/8th cable at home depot .I don't know if you have that or not but it is a home supply store
Posted on: 2/25/2012 4:13 PM by Author "Jacque"
in the forum "RC Scale Aircraft"
http://www.rcuniverse.com/forum/fb.asp?m=10975701
RE: going snow skiing
You can use skis on wet gras with out snow
Posted on: 1/17/2012 9:39 AM by Author "Jacque"
in the forum "Kit Building"
http://www.rcuniverse.com/forum/fb.asp?m=10913535
RE: Great Lakes Biplane Kit???
Walt Moucha Has plans of his design. Google him I don't have his no.
Posted on: 12/28/2011 11:51 AM by Author "Jacque"
in the forum "RC Scale Aircraft"
http://www.rcuniverse.com/forum/fb.asp?m=10879886
RE: What should I look for in a metal gear servo?
For what it is worth I use Hitec 645 mg and had no problems for severals yrs. .I use these on my 1/3 models WB 27
Posted on: 12/9/2011 7:48 AM by Author "Jacque"
in the forum "Kit Building"
http://www.rcuniverse.com/forum/fb.asp?m=10851473
RE: A little Hawker Swiss Hind
Good job, it looks great. sure would like to see a vidio of the maiden.Good luck
Posted on: 11/15/2011 8:29 AM by Author "Jacque"
in the forum "RC Scale Aircraft"
http://www.rcuniverse.com/forum/fb.asp?m=10813147
RE: WACO YMF
Dan,Dave, and Chris It was nice to meet you at the Monster planes event. That big green monster was the prettiest plane out there.chris your 1/4 scale is looking good ,it is going to be a keeper . Good to meet some of the Brothers. Jacque Waco Brotherhood # 27
Posted on: 10/26/2011 4:54 AM by Author "Jacque"
in the forum "Golden Age, Vintage & Antique RC"
http://www.rcuniverse.com/forum/fb.asp?m=10783103
RE: WACO YMF
Robert for what it's worth I have always used a16/8 on all my 26's including my pica waco . I use an apc prop witch isn't scale or a laminated wood prop with good results Jacque Waco Brotherhood # 27
Posted on: 8/4/2011 9:07 AM by Author "Jacque"
in the forum "Golden Age, Vintage & Antique RC"
http://www.rcuniverse.com/forum/fb.asp?m=10654966
RE: WACO YMF
Looking really good Mogman Jacque # 27
Posted on: 7/5/2011 10:01 AM by Author "Jacque"
in the forum "Golden Age, Vintage & Antique RC"
http://www.rcuniverse.com/forum/fb.asp?m=10606974
RE: Poke around find
Tell us exactly what it is please
Posted on: 6/14/2011 1:07 PM by Author "Jacque"
in the forum "RC Scale Aircraft"
http://www.rcuniverse.com/forum/fb.asp?m=10573871
RE: TF Gold P-51 wheel wells
In the past I have used 1/64 ply Good luck
Posted on: 5/9/2011 6:16 AM by Author "Jacque"
in the forum "Kit Building"
http://www.rcuniverse.com/forum/fb.asp?m=10509729
RE: VK Corbin Ace Balance point?
If no one comes up with the plans ,take 25 to 30 % of your wings cord . You won't go wrong......Good Luck
Posted on: 4/29/2011 8:58 AM by Author "Jacque"
in the forum "RC Scale Aircraft"
http://www.rcuniverse.com/forum/fb.asp?m=10491386
RE: Paint ball gun in pup
Ease up guys we are not shooting paint balls sound effect only
Posted on: 4/7/2011 6:42 PM by Author "Jacque"
in the forum "Questions and Answers"
http://www.rcuniverse.com/forum/fb.asp?m=10450055
RE: Dubro Hinge Slotting Tools makes hinge slots loose...
I was under the impression than there is two kinds of blades one for CA and one for plastic?
Posted on: 4/7/2011 12:44 PM by Author "Jacque"
in the forum "Kit Building"
http://www.rcuniverse.com/forum/fb.asp?m=10449331
RE: Paint ball gun in pup
I said in my post that this was for sound effect only so sorry if this was misleading
Posted on: 4/7/2011 12:40 PM by Author "Jacque"
in the forum "Questions and Answers"
http://www.rcuniverse.com/forum/fb.asp?m=10449326
Paint ball gun in pup
I would like heip setting up my Spyder A C S paint ball gun in my 1/3 pup for sound effects. thanks Jacque
Posted on: 4/7/2011 10:58 AM by Author "Jacque"
in the forum "Questions and Answers"
http://www.rcuniverse.com/forum/fb.asp?m=10449080
RE: Materials Aid
I am sorry that is aircraft spruce
Posted on: 1/9/2011 1:11 PM by Author "Jacque"
in the forum "Scratch Building, Aircraft Design, 3D/CAD"
http://www.rcuniverse.com/forum/fb.asp?m=10250786
RE: Materials Aid
Google Spruce aircraft see if the have what you want
Posted on: 1/9/2011 1:10 PM by Author "Jacque"
in the forum "Scratch Building, Aircraft Design, 3D/CAD"
http://www.rcuniverse.com/forum/fb.asp?m=10250780
RE: HELP!, need small piano hinge, where to buy?
I am not sure ,but you may find them at Mc Masters-Carr Phone# 630 600 3600
Posted on: 1/5/2011 12:17 PM by Author "Jacque"
in the forum "RC Scale Aircraft"
http://www.rcuniverse.com/forum/fb.asp?m=10241619
RE: WACO YMF
Red both are hard on Batt. The dle not quite as bad as the G 20. we have dle 30 -55 and they all seem to be Batt. eaters
Posted on: 1/4/2011 11:36 AM by Author "Jacque"
in the forum "Golden Age, Vintage & Antique RC"
http://www.rcuniverse.com/forum/fb.asp?m=10239075
RE: WACO YMF
Red pay close attn. to your Ign. Batt. that system eats them up pretty fast. Most of the club members switched to C H Ign.
Posted on: 1/4/2011 8:33 AM by Author "Jacque"
in the forum "Golden Age, Vintage & Antique RC"
http://www.rcuniverse.com/forum/fb.asp?m=10238733
RE: Uhhhhhhhh lil' question
If this was my plane I would use dual battery set up.I can't tell you how many times this has saved my planes. Just my two cents worth Jacque Waco Brotherhood 27
Posted on: 12/17/2010 5:28 PM by Author "Jacque"
in the forum "Kit Building"
http://www.rcuniverse.com/forum/fb.asp?m=10203513
RE: WACO YMF
Bill, glad you are home ,And hope you have a speedy. Jacque Waco Brotherhood # 27
Posted on: 12/15/2010 5:00 AM by Author "Jacque"
in the forum "Golden Age, Vintage & Antique RC"
http://www.rcuniverse.com/forum/fb.asp?m=10198217
RE: Panel lines advice please
Go to an art supply store ,one that carries drafting suppys .you can get down to 1/64. good luck
Posted on: 11/12/2010 2:56 PM by Author "Jacque"
in the forum "Kit Building"
http://www.rcuniverse.com/forum/fb.asp?m=10131371
RE: Prop adapter
It adds 1 inch to my G- 62 stock hub which is 2 3/16. I don't know anything about your Eng.
Posted on: 10/4/2010 11:04 AM by Author "Jacque"
in the forum "Kit Building"
http://www.rcuniverse.com/forum/fb.asp?m=10046444
RE: WACO YMF
Good stuff MON
Posted on: 9/26/2010 5:19 PM by Author "Jacque"
in the forum "Golden Age, Vintage & Antique RC"
http://www.rcuniverse.com/forum/fb.asp?m=10028682
| 
